While running the command sudo apt-get upgrade I get this msg
"Failed to authenticate the following packages"
AVISO: No se han podido autenticar los siguientes paquetes!
libnautilus-extension1 libndesk-dbus1.0-cil libsoup2.4-1 libsoup-gnome2.4-1
libwebkit-1.0-common libwebkit-1.0-2 nautilus nautilus-data notify-osd
Fixd
Yesterday after trying to remove KDE and noticing that it started removing a bunch of Gnome packages as well, I've managed to fix most of the damage. I still have one thing left. To install a .rpm package I have to do it via command line as root. If I try just double clicking it now it doesn't prompt me for the root password, then it just says, "Failed to authenticate" and doesn't finish. Also I used to be able to scale the frequency of my CPUs with the applets on the Gnome panel. When I would select a different frequency it would prompt me for the root password, then change accordingly. Can somebody tell me if there's a gconf setting or a package that was removed that could cause this?
View 1 Replies View RelatedYesterday after trying to remove KDE and noticing that it started removing a bunch of Gnome packages as well, I've managed to fix most of the damage. I still have one thing left. To install a .rpm package I have to do it via command line as root. If I try just double clicking it now it doesn't prompt me for the root password, then it just says, "Failed to authenticate" and doesn't finish. Also I used to be able to scale the frequency of my CPUs with the applets on the Gnome panel. When I would select a different frequency it would prompt me for the root password, then change accordingly. Now when I click it nothing happens. Can somebody tell me if there's a gconf setting or a package that was removed that could cause this?
View 2 Replies View RelatedI'm running Lucid Lynx. When I go into synaptic package manager and try to take updates, it says it can't authenticate some of the packages, including for example linux-image 2.6.32-27-generic. What is up with this?
View 4 Replies View Related9.04 has not been updating and is giving these messages.
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80] .....
Some index files failed to download, they have been ignored, or old ones used instead.
I get a box from update manager listing all the updates that it think I should download. I try to, and I just get this message afterwards, "Failed to fetch [URL] Hash Sum mismatch". Any solutions?
Edit- I'm running on Ubuntu 10.10 if that's any help.
what this means? installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... dpkg: parse error, in file '/var/lib/dpkg/status' near line 11756 package 'vinagre': `Depends' field, reference to `libgconf2-4': version contains ` ' I get it while trying to update my computer.
View 2 Replies View RelatedI got a problem with my CentOS server. Somebody told me OpenVPN Requires different changes inside my firewall settings. That could be the problem why openvpn wont load..I receive this error on my CentOS panel when im trying to connect into the centos openvpn (with my winxp pc):
Thu Sep 17 20:31:36 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
Thu Sep 17 20:31:38 2009 Authenticate/Decrypt packet error: packet HMAC authentication failed
Thu Sep 17 20:31:38 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
[code]....
i am using ubuntu 10.04 i want to know how to authenticate the proxy settings for the terminal to install and d download package.
View 1 Replies View Relatedwhen I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
View 1 Replies View RelatedI was having trouble with pulse audio and completely obliterated pulse audio from my machine in order to prepare for a reinstall of pulse audio. this also uninstalled a few other packages that I needed to enter gnome or kde. when I try to login via gdm(?) my password will not authenticate (when I enter via xterm or tty the password is accepted). how can install packages off a live usb drive from Terminal. how to access a wifi network under terminal to use apt-get.
View 4 Replies View RelatedWhenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies View RelatedPreviously I have a hard disk running OpenSUSE partitioned as follows:
Code:
/dev/sda1 = swap
/dev/sda2 = /
/dev/sda3 = /home
I redid the default partitioning scheme that Fedora tries to use (no LVM crap). Basically told it to make the above layout and to format swap and slash, but NOT to format /home because I want that data. I had it go ahead and install grub on the MBR of this HD as well. The install seems to have went ok and it rebooted. That is when the first problem comes up. I never see grub. I just get a black screen then a bar at the bottom that progressively turns blue, which I assume is Fedora loading.
This is all well and good, then it gets to the login screen (GDM) and I try to log in as root and it tells me "can't authenticate user" hangs for a bit, then goes back to the log in box. I try to get a virtual console (Ctrl+Alt+F#) and nothing. So I guess I have 3 problems in order of significance:
- Why no grub?
- Why no virtual console?
- Why root can't log in?
Normally I would edit kernel option line at the grub prompt to boot into single user mode and fix the problem, but can't. I was able to use the "rescue mode" on the Fedora DVD to accomplish this, but have not had a chance to figure things out any further. I don't think having a /home created by another OS would prevent root from logging in since root "home dir" is /root.
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies View RelatedI've been a long time ubuntu/debian user, and I decided to give fedora a try. Durng my first set of updates after install, the updater (gpk) seemed to stall on an 'updating libraries' step (it lasted for over 12 hours). Anyway, I force quit the program, restarted the system, and all appears fine. What I wanted to ask is this; is there some way to check the yum log to see if the update completed successfully, or an equivalent to 'apt-get -f install' to fix any broken/partially installed packages.
View 3 Replies View RelatedI recently upgraded from F13 to F14 using "preupgrade". This is the first time I've used preupgrade. So far, F14 is running OK. There are some leftovers from F13 and I'm wondering if this is correct.
Q1: There are 176 F13 packages remaining. [alfrugal@localhost Documents]$ rpm -qa | grep fc13 | wc -l 176 Is this OK? FWIW, after the upgrade, I ran "package-cleanup --orphans" as recommended by the "preupgrade" page on the Fedora Project wiki.
Q2: Also, my GRUB menu was correctly updated for F14, but it still contains the three entries it had for F13. Is it normal for the preupgrade process to require the user to clean up the obsolete entries from the GRUB menu?
How to add packages using X-Window's add/remove packages option in RHEL-5.3 as it shows only the currently installed package and and does not show any thing when we click the button "available packages" ?
View 2 Replies View RelatedHave dual boot winXP, FC6 computer. Clobbered something so FC6 does not boot. Am trying Ubuntu 9.10 CD; tried first to run from CD- but it asks for username and password, will not accept blanks nor my winxp values- keeps 'failing to authenticate'. So I did an install in new partition beyond linux fc6. It finally lets me log in, giving a small text window. How to get to desktop, and is there a way to get to my old home files in linux fc6 in native linux partition?
View 4 Replies View RelatedHOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies View RelatedI'm running OpenSuse 11.1 (this may be the thing that causes me to finally update ) with KDE 4.4 (specifically, 4.4.4 release 5). Recently (maybe the past month or so... give or take a week or two or so... first time I really remember it happening is when I realized they changed the repository for KDE 4.4 from factory to stable and switched them) >90% of the things I try to install via YAST fails with the following error... this example is me trying to upgrade avidemux from the Packman repository.
Code:
Error: RPM failed: warning: /var/cache/zypp/packages/Packman_Repository/x86_64/avidemux-2.5.3-4.pm.5.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 9a795806 error: %post(avidemux-2.5.3-4.pm.5.1.x86_64) scriptlet failed, signal 11
Oddly enough, the main avidemux package threw the error, but the avidemux-qt4 package didn't.
I've tried doing
[Code]...
I have a set of bash scripts that I'm running that automatically build a set of packages for me and redirect their output into logs. Basically, I have a bunch of lines that are something like this: ${CONFIGURE_DIR}/configure &> ${LOG_DIR}/log or cd ${CONFIGURE_DIR} && make &> ${LOG_DIR}/log, etc.
This is supposed to make the entire process silent. However, sometimes with some packages some output leaks to my console (either stdout or stderr). I'm thinking that maybe the configure scripts/make are executing commands within new shell instances that don't inherit my redirect, or something to that effect.
Another reason for thinking this is that in another part of my script I detect errors when running make by testing with "if [ $? -ne 0 ]", and if the redirect leaks to my console and also the leaked output indicates that the build failed ("make: Error" and so on), then my $? test fails (i.e., it thinks that $? == 0, whereas a failed make should return a non-zero value). It's as if my original script can't "see" the results from child commands executed from later scripts.
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
Not sure where I got MediaTomb. Probably clicked it in the software center because it looked interesting. Anyway I cannot download or install anything. Any. Thing. I get this error: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... dpkg: unrecoverable fatal error, aborting: syntax error: unknown user 'mediatomb' in statoverride file
View 2 Replies View RelatedPackage Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
I have an Acer Aspire One, Model PAV70 that had Windows 7 Starter on it. I booted Ubuntu 10.10 from a USB HDD and then formatted the Acer drive with Ubuntu. I then started installing Ubuntu on the newly formatted HDD and got an error near the end of the install. It said, "apt configuration problem, an attempt to configure apt to install additional packages from the cd failed." After this happened the system locked up and I had to reboot. Now I get a black screen with a white blinking cursor. I can't get the system to recognize anything. What can I do?
CPU Type: Intel(R) Atom(TM) CPU N450
CPU Speed: 1.66GHz
System BIOS Version: V3.05(DDR2)
VGA BIOS Version: Intel V2001
Just wondering. Every time I reload packages in synaptic I always get a whole bunch of failed "InRelease" or "TranslationIndex" URIs. Is that normal? I don't need any other translations for anything, just English. Is there something I should do to remove these from even being checked in the first place?
View 1 Replies View RelatedI have an installation of Ubuntu 9.04 on a standalone workstation. I need to download all of the packages for the normal installation and updates.Does anyone know where I can pull the complete package sets rather than individual packages rather than one at a time?
View 1 Replies View Related
