have Evolution syncing with Palm Treo except for the Tasks. In a previous installation Memos didn't sync. I have set the EToDo, EMemos, ECalendar and EAddress conduits to Copy from PDA, yet no data appears in Evolution. I'm running Ubuntu 9.10.
View 1 RepliesI use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
I have just aquired a Palm Tungsten T3 and am trying to get sync/network via bluetooth working in Natty.I am wondering if there is a 'correct' way to do this as the bluetooth architecture has changed drastically since these howtos were written.
View 3 Replies View RelatedI've been trying to get my palm TX to sync with kubuntu 8.10. Quickly after I place the palm on the cradle I get a warning msg that I've attached below. I did follow some directions at one point where it required me to install visor. It had sync'd a few times, but then it started giving me these errors. Eventually I tried to delete the device, etc.
The msg:
Failed to connect using device 'Cradle', on port 'usb:'.
Check your confirguration, as you requested new-style libusb
'usb:' syncing, but have the old-style 'visor' kernel module loaded.
You may need to select a 'ttyUSB...' device
The palm tx can browse the net and send/receive emails wirelessly. It can sync with kpilot via the usb cable. It can 'see' the router at 192.168.1.1 when I browse to there. After browsing various websites/forums (including palm's own).
Have set kpilot to device net:any and the slowest speed 9600, but message is 'Cannot open pilot port net:any'
Message from palm is 'connection between your device and the desktop could not be established. Please check setup and try again.'
I tried a command line which I found somewhere. The result is:
I have an old 3E that syncs up very well when I use Vista on my Presario and a USB to Serial port adapter, problem is I really hate Vista. I just installed linux mint 8, which I love but no luck in syncing my palm 3E. Does anyone know if I have a chance of getting this to work? If so I'd appreciate being pointed in the right direction.
View 12 Replies View RelatedThe new Google option in Evolution works beautifully for both contacts and calendars, and gnome-pilot syncs my Palm Centro perfectly with Evolution. Perfectly, that is, until I choose a Google destination in the gnome-pilot settings.
View 1 Replies View Relatedwhat files control the udev device mapping. I'm trying to get a fresh install of 11.3 to sync a palm pilot with jpilot.
I have created a "10-pilot.rules " file in /etc/udev/rules.d containing:
BUS=="usb", SYSFS{product}=="Palm Handheld*", KERNEL=="ttyUSB*", NAME="ttyUSB%n", SYMLINK+="pilot", GROUP="users" MODE="0666", OPTIONS+="last_rule"
when I hit hot-sync I get:
crw-rw-r-- 1 root dialout 188, 0 Jul 18 22:13 /dev/ttyUSB0
crw-rw-r-- 1 root dialout 188, 1 Jul 18 22:13 /dev/ttyUSB1
If spent the last 6 hours googling around and yes I'm a member of "dialout"
What is controlling the attributes of these nodes?
Oh, and P.S. Why'd they put alpha video drivers into the kernel another 3 hours wasted.
I've recently upgraded from 10.3 to 11.2 (32 bit). On my 10.3 system I was able to sync my Palm Treo, plug in cameras and they'd pop us as filesystems etc. Now, although my printer, and ipod are recognised, anything else I plug in isn't.
* When I plug my camera in and turn it on, nothing happens
* When I try to sync my Palm Treo, it seems that the /dev/pilot device isn't created by kpilot.
Connecting Palm 72 to internet Via Bluetooth.
PALM: *Connect* Initializing... Error: Serial: timeout. Could be bad cable or faulty modem. So I do on PC:
[Code]...
I know there are syncing problems with Ubuntu One at the moment, but one of my computers is absolutely fine and another one just won't have anything to do with Ubuntu One contact sync. This is the last part of my desktop couch replication log -
2010-05-12 18:56:28,873 DEBUG started replicating
2010-05-12 18:56:28,875 ERROR replication of discovered hosts aborted
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/desktopcouch/replication.py", line 81, in do_all_replication
dbus_io.get_seen_paired_hosts(uri=local_uri):
File "/usr/lib/python2.6/dist-packages/desktopcouch/pair/couchdb_pairing/dbus_io.py", line 136, in get_seen_paired_hosts
pairing_encyclopedia = couchdb_io.get_all_known_pairings(uri=uri)
[Code].....
I have been syncing files to ubuntu one without any problems for some time. I can't get my evolution contacts to sync. When I try to copy my addressbook to ubuntu one I get message "error adding contact". I can't get rid of this message - only way is to force quit. I'm running Maverick, and I did a clean re-install to try to get rid of problem - didn't work. Currently when I open the ubuntu one addressbook, there are three blank entries which can't be deleted or edited.
View 2 Replies View Relatedhow to sync contacts, calandar and notes between my Nokia N97 Mini and Ubuntu 10.4 via Bluetooth (or USB).I used some time on 9.10 on this without luck as I was told that the tutorials on this forum did not work on 9.10. Which applications should I use and how should they be configured?
View 1 Replies View RelatedI am wondering if I set the /home/user/.evolution folder to synchronise with ubuntu one on my eee, and then when I update the desktop remove the /.evolution folder and replace it with the one synchronised with ubuntu one would all my setting and messages be copied as well or not? And no I can use Imap as I use that dreaded thing known as hotmail! My desktop is running 8.04 but is due an upgrade soon so I can test my idea out!
View 8 Replies View RelatedLast week in an effort to return some of my settings to default. I deleted my Evolution account and remade it. Everything works fine but contact sync. I checked my Ubuntu One settings, and it still says contacts are synced.
View 1 Replies View RelatedIs it possible to have all my Hotmail folders be synched with my Evolution? (by default it is only synch-ing Inbox)
I've searched these forums and seen this question raised by many but no clear answer on it yet...
On my network I have one computer running Fedora 14 and another running Ubuntu 1.0. I need to sync Evolution between these 2. The problem is Evolution folders have different content in the 2 distros. Is there a way to sync e-mails, contacts etc, between these 2 distros?
View 4 Replies View RelatedOn my network I have one computer running Fedora 14 and another running Ubuntu 1.0. I need to sync Evolution between these 2. The problem is Evolution folders have different content in the 2 distros. Is there a way to sync e-mails, contacts etc, between these 2 distros?
View 2 Replies View RelatedI installed Lucid and went to Ubuntu One from Me menu, clicked manage account, did not get a message to add the computer. After reading a few threads I deleted two Ubuntu One password tokens from the password and encryption keys in applications-accessories. I have not yet been able to get the Ubuntu One contacts in Evolution to work. It always says the address book does not exist. Additionally when I try to sync a file it says 'syncing' but just sits there on 0% doing nothing.
I have tried a fresh install and still have the same problems (I deleted the passwords again to allow me to add the computer). I have tried purging ubuntuone* and reinstalling after deleting the config directories, still no luck. I have tried adding another email address to the single sign on and tried logging in but again this did not work.
I do have another PC I am using now that can connect to Ubuntu One on a different user name and account (in other words nothing to do with the other computer), and I have noticed there is a password entry marked 'desktop couch user authentication' which I do not have on the other computer.
The issue I am having is that I cannot sync my Yahoo calendar using CalDAV in Evolution. The problem is that the link to the Yahoo CalDAV calendar is [URL], and in Evolution, it keeps inserting 'caldav://' at the beginning of the link when you click OK when setting up the calendar.
View 8 Replies View RelatedI am running my PC and laptop on Ubuntu Lucid, and my netbook on Ubuntu Lucid Netbook Remix. I would like to synchronise my Evolution calendar and task list between the three machines. First step would be to get calendar and task content o my PC onto the other two machines. Is this possible (e.g. via Ubuntu one), and if so, how?
View 2 Replies View RelatedHOWTO: Sync Contacts between BlackBerry and Evolution on Fedora 10
1. Overview
Open source tools are available to sync a BlackBerry with Evolution but it appears these tools are not supported by Fedora 10. The main thing that seems to be missing is the Barry plugin for OpenSync. Maybe the reason that this package has not been created is that Barry requires OpenSync version 0.22, whereas F10 ships OpenSync version 0.36. This HOWTO explains how to build all of the required components from source code. If the required package becomes available, this HOWTO would then be redundant.
This entire build and installation is performed in the home directory of a non-root user to ensure that no system files are broken. Some of the commands in this HOWTO must be run as root, when this is the case it is stated explicitly and otherwise the commands in this document should be run under a non-root account. The username for the examples below is erik.
2. Be a Developer
When you install F10 you are prompted to specify the uses to which your computer will be put. Hopefully you selected software development, if not your machine will probably be missing many of the utilities required for this HOWTO.
3. Initialize Evolution
Open Evolution and click on all of the buttons at the left to ensure that the necessary databases are created.
4. Prepare The Environment
[Code]...
I have been using windows xp and microsoft outlook, mainly for the reason that Microsoft ActiveSync on my smartphone can only work with outlook. Now that I have diverted to Ubuntu, I'm wondering if there is any way to sync my smartphone calendar, to-do task list, and contacts, etc, with evolution under Ubuntu?
View 4 Replies View RelatedI have setup my gmail and yahoo account in evolution. I can see my mails and send mails from evolution. But they(evolution and server) is not synchronized, i.e. if I read a mail in evolution, it still shows as unread in web version. or deleted mail keep coming back unless i delete it from web also.
View 1 Replies View RelatedI set up Evolution with a gmail account using TLS both for sending and receiving messages. Then I markd Inbox and All mail folders to be synced for offline usage from their properties (right-click folder and select Properties item).I tried File>Download Messages for Offline Usage and Send/Receive button and Work Offline / Work Online and pressing sync for offline usage when it asks before going offline. But in all situations, Evolution ONLY shows messages (at its status-bar area) about syncing messages, checking for new mail, etc. but DOES NOTHING without any real network activity. Time to time it sends receive some kilobytes, but I could not make it to start some gigabyte gmail syncing transfer.
View 3 Replies View RelatedI am trying to find out the best way to sync my address book from my motorola razr v8, and eventually my new nexus one phone, to Evolution in fedora 12. I don't use bluetooth, just a simple usb connection.
View 1 Replies View RelatedI have wiped Windows and am running 10.04 exclusively. 32 bit, when setting up evolution e mail account i dont see where to enter password....where is it? anyone have link with screenshots? i know i can use regular hotmail but want to know how to use default ubuntu programs.
I still can't find a spot for password. options are, login, set preferences and a remember password checkbox but nowhere to enter a password
I have my task list in evolution (mainly so it can sync with my phone and online task list) but I always forget to look at the task list. Is there an application or plugin which periodically displays the contents of the tasklist or even better, it briefly displays the most urgent/important tasks when I login? Or anything else which automatically displays the most important tasks. Currently I have to open the task list and look at them (which I usually forget). I do not mean some kind of alarm when the task is due but more a daily reminder of what to do.
View 3 Replies View RelatedI've got Ubuntu One syncing a single 25MB folder on 4 computers. On one of these computers, the ubuntuone-syncdaemon process constantly pegs the CPU, using from 50-80% long after any sync-able files have been modified and successfully synced. The process is only using 8.9MB of RAM.
Specs:
Ubuntu 10.04 (lucid)
Kernel 2.6.32-24-generic
1000.8 MB RAM
Pentium 4 2.53GHz
Free disk space: 280.9 GB
System monitor shows 56.8% total RAM usage, 15.4% swap file usage.
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.