Ubuntu Installation :: Boot From Flash Drive 10.10 Grub Rescue?
Oct 24, 2010
First time poster and recent Ubuntu adopter. I recently installed 10.10 on my main HD alongside a separate windows (xp) partition (it worked perfectly). Then I decided to get fancy and installed 10.10 to a flash drive directly from a live cd. I attempted to boot from the flash drive, and got a black screen with a blinking underscore for about 10 minutes, then I forcefully rebooted. Now, whenever I attempt to boot at all from my main HD I get "error: no such device and a ton of misc numbers. And the flash drive will not allow me to boot from it. Currently, I'm working within the Live CD.
I have a few projects I need to complete with Dreamweaver inside XP, so recovering it completely would be nice.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdf
[Code].....
View 9 Replies
ADVERTISEMENT
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Feb 8, 2010
I've tried to be clever but as usual I didn't think before acting and missed a small detail.
I have recently installed karmic (dual booting with Vista) on my dell xps laptop. The install went fine, I'm very happy with my new OS.
I bought a new Seagate 500GB portable external HDD. I got a bit over-excited and installed karmic on the external drive. This worked fine and I got a lovely (but slow to appear) Grub2 menu showing my vista and both ubuntu options.
My problem is that now, when I unplug the external drive, Grub fails and I get a grub rescue> prompt. So I need the external drive to be plugged in if I want to boot.
It seems I have done something to the grub configuration. I have read around the subject but I am not confident about how best to proceed.
I understand there is an 'advanced' option in the installer which will allow me to choose where to install grub. Presumably I want it on the internal drive so that I can boot without the external one plugged in.
Am I right in thinking I can just pop in my install disk and redo the installation?
If I indicate I want to install Grub on the internal drive, which partition should I aim for?
Will I get a grub option for booting to the external drive?
Will I be able to plug the external drive into a different machine and boot from it?
I haven't done anything with the fresh install on the external drive so I don't mind losing that.
View 9 Replies
View Related
Jun 28, 2011
I have an hp laptop and i had ubuntu on it for 3 years. my hard drive started to fail a while ago (i had ubuntu 10 on it until 1 week ago) and a then it all went black...I took the laptop to a repair shop, they told me it was the disc, so i bought a new disc, installed it on my laptop and reinstalled the new ubuntu 11. so far so good. i have now a working OS, internet connection and i can in fact type this message.
The thing is: all my files are on the old drive, which doesn't load/boot/start/read anymore. I have tested it on some friends's pc, tried a few HD disgnostic tools, they all send the same message: "fail"
I then tried to mount my old drive (with all my precious files in it) on my laptop as an external drive (usb) hoping that ubuntu 11 could read it as an external usb key: it gets read by the system, but it shows no files at all. it also shows an error message saying the drive can not be mounted, with some "sdb1" thing. i am sorry but i'm really dumb when it comes to tech language.
Then i tried to boot it on start-up but i got the grub rescue> thing and nothing else, just a sad, blinking cursor to recover my files,i have also tried testdisk but couldn't understand very well how to use it, and then photorec, from which i recovered bits and pieces of files, with no name. some of them are just parts some of them are complete.
My problem is: i have to get access to my files, as I use them for work, i couldn't do a back-up recently and i have some real important deadline to meet... for which i need those files. is there any way i could solve the grub issue and have that drive load/mount again as external usb?
View 9 Replies
View Related
Jun 5, 2010
I've got Ubuntu 10.04 installed on one partition, and Windows Vista on another. I was messing around with my partitions, and now I can't boot to either one. I just get an error when I boot up on GRUB which says "error: no such partition", and then a prompt saying 'grub rescue>'. I've read up on other people's posts, and they said that I should reinstall GRUB from a livecd, but that doesn't look like it does anything. It seems that GRUB is trying to boot from hd0,8, and that doesn't exist anymore. I can change the 'root' and 'prefix' variables to the right partitions, but the 'boot' or 'chainloader' command doesn't work. You should be able to boot from 'grub rescue>', because that's what it's for, right?
I just want to be able to boot into Ubuntu, not Windows.
PS: Sorry if I'm specifying way too much information(or not enough), I'm fairly new to forums.
View 6 Replies
View Related
Jun 19, 2010
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
View 6 Replies
View Related
Dec 15, 2010
So earlier today I was running out of space on my regular Windows 7 partition and I played around with extending it. I ended up somehow deleting grub and messing up my entire system. I've spent the last 2 hours looking for the answer to this and everyone has been saying to boot from a live disk and fix it that way.
Well, I've tried everything, the only way I can boot right now is via USB and it will NOT allow me to. I checked on other computers and even re-installed and formatted by external hard drive to try and get it to work and it refuses. I've changed my BIOS to boot from USB so I have no idea as to why this is happening. Also, I've tried using the "ls" command to find my partition via "ls (hdX,Y)/" and all of them come up as unknown filesystems.
View 9 Replies
View Related
Apr 10, 2010
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
View 2 Replies
View Related
May 24, 2010
I just did a full installation of lucid erasing karmic. installation is completed but when I boot I get grub rescue. I also have WIN7 installed.
View 1 Replies
View Related
Jan 17, 2011
I set up my Dell Inspiron Laptop as Dual Boot -> Xp / Ubuntu 10.04. - all worked well. I had 2 installations of XP on this machine and I removed one - all worked well. I then went into XP and deleted the partion (4) that the old XP had resided on (using Easeus Partition Master) All NOT working well !! Now when booting the machine I get grub rescue> I did ls and got ....
[Code]...
View 6 Replies
View Related
Feb 2, 2011
I was dual-booting XP and Ubuntu 10.10 for a while, but as I never used Ubuntu it was just taking up space, so I figured I'd get rid of it. I used a partitioning tool from inside XP to remove the Ubuntu partition, forgetting that I used GRUB2 every time I booted to select which OS to load. Now when I start my computer I get stuck at the "grub rescue>" screen.After searching for solutions to this problem all of them said to either use the Windows XP CD to fix the Master Boot Record or reinstall Ubuntu, but I dont have my XP CD and there isnt enough room on my hard drive anymore for a Ubuntu install. Is there anything else I can do to fix this?
View 5 Replies
View Related
Feb 5, 2009
I'm experimenting a bit with my fedora, so I need to enter rescue mode very often. Every time I want to enter rescue mode, I need to insert fedora DVD Is there a way to install rescue mode on my hard drive so I could boot into rescue mode from GRUB?
View 4 Replies
View Related
Apr 9, 2011
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
View 6 Replies
View Related
Feb 20, 2010
I accidently deleted my ubuntu partition, and when boot I get this message:GRUB loading.error:unknown filesystemgrub rescue>I can't get into my bios options either... I just see the MSI splash screen and it cuts right to this error message.
View 4 Replies
View Related
Oct 11, 2010
Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies
View Related
Jun 17, 2011
I had 250gb hard disk with dual boot, xp and ubuntu 10.10.Yesterday, i tried to upgarde my ubuntu 10 to 11 from a live cd....b4 doing so, i used a win software EasyBCD to fix the mbr but it didn't work properly..and i ignored it(my biggest mistake)and deleted the ubuntu partion from the windows device manager. It just displays "Booting from Live CD" for few minutes and again displyas the same above error.What should i do now?Its ok if i m not able to recover my data back...i hv sycnd my docs on the internet.
View 9 Replies
View Related
Feb 13, 2015
I'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:
GRUB loading.
Welcome to GRUB!
error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>
View 2 Replies
View Related
Feb 11, 2010
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
View 4 Replies
View Related
Dec 23, 2010
I previously had a machine that dual booted Windows 7 and Ubuntu 10.10 32 bit. I recently attempted to wipe out the 32 bit Ubuntu and install 64 bit Ubuntu.
Here what I did:
- I booted from the LiveCD, and had no problems
- I formatted /sda3 using gparted. I checked that Ubuntu resided on /sda3 via the command "sudo fdisk -l". This worked fine.
- I then clicked the "install ubuntu" option on the desktop, and chose the largest chunk of free space.
- About 15% through the install, I was told the CD could not be read from due to a potential scratch or issue. I then tried to revert back to the Os running from the LiveCD, and things went crazy. I had trouble shutting down the machine and did a hard reset.
Now, whenever I boot I am greeted with the following message:
Windows Deployment Services: PXE boot aborted
error: no such partition
grub rescue>
At the grub rescue prompt when I ls, I see:
(hd0) (hd0,4) (hd0,2) (hd0,1)
I can still boot the LiveCD. I tried that again and tried to again format sda3 using gparted but had no luck fixing the issue. When booting from the LiveCD I am also told by gparted that "sda1 does not coincide with a cylinder boundary" or something of that nature.
View 9 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
Sep 19, 2014
I am running a 14 disk RAID 6 on mdadm behind 2 LSI SAS2008's in JBOD mode (no HW raid) on Debian 7 in BIOS legacy mode.
Grub2 is dropping to a rescue shell complaining that "no such device" exists for "mduuid/b1c40379914e5d18dddb893b4dc5a28f".
Output from mdadm:
Code: Select all # mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Wed Nov 7 17:06:02 2012
Raid Level : raid6
Array Size : 35160446976 (33531.62 GiB 36004.30 GB)
Used Dev Size : 2930037248 (2794.30 GiB 3000.36 GB)
Raid Devices : 14
[Code] ....
Output from blkid:
Code: Select all # blkid
/dev/md0: UUID="2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb" TYPE="xfs"
/dev/md/0: UUID="2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb" TYPE="xfs"
/dev/sdd2: UUID="b1c40379-914e-5d18-dddb-893b4dc5a28f" UUID_SUB="09a00673-c9c1-dc15-b792-f0226016a8a6" LABEL="media:0" TYPE="linux_raid_member"
[Code] ....
The UUID for md0 is `2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb` so I do not understand why grub insists on looking for `b1c40379914e5d18dddb893b4dc5a28f`.
**Here is the output from `bootinfoscript` 0.61. This contains alot of detailed information, and I couldn't find anything wrong with any of it: [URL] .....
During the grub rescue an `ls` shows the member disks and also shows `(md/0)` but if I try an `ls (md/0)` I get an unknown disk error. Trying an `ls` on any member device results in unknown filesystem. The filesystem on the md0 is XFS, and I assume the unknown filesystem is normal if its trying to read an individual disk instead of md0.
I have come close to losing my mind over this, I've tried uninstalling and reinstalling grub numerous times, `update-initramfs -u -k all` numerous times, `update-grub` numerous times, `grub-install` numerous times to all member disks without error, etc.
I even tried manually editing `grub.cfg` to replace all instances of `mduuid/b1c40379914e5d18dddb893b4dc5a28f` with `(md/0)` and then re-install grub, but the exact same error of no such device mduuid/b1c40379914e5d18dddb893b4dc5a28f still happened.
[URL] ....
One thing I noticed is it is only showing half the disks. I am not sure if this matters or is important or not, but one theory would be because there are two LSI cards physically in the machine.
This last screenshot was shown after I specifically altered grub.cfg to replace all instances of `mduuid/b1c40379914e5d18dddb893b4dc5a28f` with `mduuid/2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb` and then re-ran grub-install on all member drives. Where it is getting this old b1c* address I have no clue.
I even tried installing a SATA drive on /dev/sda, outside of the array, and installing grub on it and booting from it. Still, same identical error.
View 14 Replies
View Related
Jan 18, 2011
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
View 14 Replies
View Related
May 15, 2010
essentially what the title says. Clonezilla cannot be installed in ubuntu so running a live linux on the usb and installing the applications in that is not an option.
View 2 Replies
View Related
Jun 11, 2011
Back in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
View 5 Replies
View Related
Dec 20, 2010
dual boot ubuntu / windows on seperate drives ubuntu drive fails today and now boots saying cannot find device (id) grub rescue>
View 7 Replies
View Related
Nov 11, 2015
I have an issue after the installation of debian 8.2 on an usb flash drive:
I had debian 8.2 and windows 8.1 running on a single SSD. Everything was fine. I wanted to install a second debian on a 32gb USB flash drive as a live system. After the installation I am not able to boot my debian (SSD) without the flash drive plugged in. I only get a grub rescue prompt. Booting windows still works. It is also possible to boot both debian systems if the USB drive is plugged in.
So it seems to me, that the debian bootloader was accidently installed to the USB flash drive and the original bootloader on the SSD does not work properly anymore. I used a netinst image from a second USB flash drive to install debian to the first USB flash drive.
Update fdisk output:
/dev/sda1 2048 2050047 2048000 1000M Windows recovery environment
/dev/sda2 2050048 2582527 532480 260M EFI System
/dev/sda3 2582528 4630527 2048000 1000M Lenovo boot partition
/dev/sda4 4630528 4892671 262144 128M Microsoft reserved
/dev/sda5 4892672 223840255 218947584 104,4G Microsoft basic data
[Code] ....
View 6 Replies
View Related
Jan 2, 2010
My girlfriend has a dual boot netbook I set up for her with Vista + 9.10. Her internet service went down yesterday temporarily and she was messing around with the computer to get back online and somehow booted into the Windows Rescue Partition and began the Windows Restore process, then turned the computer off during the middle of the restore process.It's her only computer and she lives 1800 miles away. And since it's a netbook there's no optical drive.
When she boots up now, the netbook goes straight into Grub Rescue mode. I got her to try most of the commands for Grub Rescue, but most of them come back as "Unknown Command". The "LS" command works though, and she was able to get a list of partitions displayed.Does anyone know of some commands she could use try to boot back into 9.10 (assuming it's still there)? Or even boot into Windows? Specifically, is there a simple command that could be combined with "LS" to specify a partition and try to boot into it?
View 9 Replies
View Related
Oct 23, 2010
After many failed attempts, I finally got Ubuntu on my Flash Drive (16gb). This was completed by downloading Ubuntu Desktop Edition (ubuntu.com), and using The Universal USB Installer to put the .iso on my Flash Drive.
When I try to boot my PC from the flash drive, I get a black screen saying...
"No DEFAULT or UI configuration directive found! Boot:"
View 3 Replies
View Related
Apr 11, 2010
First the hard data:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager
System is AMD 64
Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore.
Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
View 9 Replies
View Related
Sep 12, 2010
So here is my situation: I am unable to boot from a CD I am unable to boot from a Flash Drive I have Ubuntu installed with Wubi, and can boot into it successfully I have a Ubuntu Installation CD I have created a partition into which I'd like to install Ubuntu. Is it possible to boot into my current Wubi Ubuntu installation, and then launch the Ubuntu installer from the installation CD, and then direct this installation to the empty partition I have waiting?
Basically, I think my question is this: Does anybody know what file to run manually from the CD in order to launch the installer?
View 9 Replies
View Related
