Ubuntu Installation :: Partitions Not Detected During 10.04 Install?
May 2, 2010
trying to install 10.04, once i reach the dialog where i'm supposed to select partitions for mount/install, the installer reports my HDD is empty. it wants to create a partition table and proceed from there.in fact, my 1TB disk is 50% full and contains 10 partitions, including /boot /home, swap (which i wanna reuse) and 2 other OS partitions. these partitions do show up when running nautilus in 10.04 live, also "fdisk -l" shows them - the installer does not.
View 9 Replies
ADVERTISEMENT
Jul 17, 2010
About a month ago I did a clean install of Kubuntu Lucid. I believe it was after that point I was unable to run other LiveCDs without some problems -- I first noticed that swap partitions failed or weren't detected. It appears that partition managers such as gparted, fdisk, etc cannot detect my partitions and interprets my hard drive as "unallocated" (this has been tested with multiple LiveCDs). However, as far as I can determine, all the LiveCDs with applications for mounting drives and HD backup ARE able to detect the partitions.Furthermore, when I am in Lucid, I am able to detect the partitions with gparted.It's very odd... I've only found a few situations like this on the web. Could it have something to do with the GPT?[URL]
View 7 Replies
View Related
Apr 24, 2011
I've just installed 11.4 and then updated to gnome 3. I've noticed that Nautilus doesn't appear to mount my windows NTFS partition. I find this odd because both Ubuntu and Fedora detect and mount it just fine in Gnome 3 (I've been trying all 3 this week).
View 7 Replies
View Related
Nov 21, 2010
I tried to install ubuntu 10.10 today through livecd. but the partitions in my 60gb samsung harddisk are not detected. My entire harddisk is shown as unallocated free space. Also gparted is not detecting the partitions as well. I am currently not facing any problems with my partitions in windows xp. I tried the solution given here (to no avail): [URL]. I have had no such problems with previous versions of ubuntu.
View 9 Replies
View Related
Jun 17, 2011
Ubuntu 11.4 installed on 400GB SATA Drive.I have 2 other SATA HD's and only 1 is being shown in Ubuntu.The missing drive is Fat 32, and all the drives are visible in bios.
#1 what steps I need to take to find out why Ubuntu is not detecting it?
#2 how to add the drive to Ubuntu?
View 9 Replies
View Related
Mar 20, 2010
I am in the process of installing BT4. At the partitioning stage of the install, I noticed that it could not detect my windows 7 like in the example screenshot they provided with the guide: click here: However, This is how the partition stage looks like on my system:
Why can't I see Windows here? I remember from the partition editor in windows, that my primary C: disk had 3 partitions. A system reserve, some small unallocated space and 157 gb which belongs to windows. My question is, why does it fail to detect the windows. I'm guessing the ubuntu installer only sees the 6gb of unallocated space as the only possible option to install on. So Ubuntu can only be installed on unallocated space ? I'll have to narrow down the partition that C: is on, make the unallocated partition bigger and put Ubuntu on it.
Did I answer my question there? I am being paranoid because in no case can I loose files. Here's a screenshot of my gParted
View 9 Replies
View Related
Apr 16, 2010
I'm trying to install 10.04b2 x64 on my new rig and for some reason the live cd can't detect both of my 1TB Sata 3 drives. There is no Raid and the bios has them flagged as IDE. I have also tried adding pci=nomsi to the boot string to no avail.
View 8 Replies
View Related
Aug 17, 2010
I tried to install Ubuntu 10.04 on a quiet old DELL Inspiron 2650. During the install process, neither mousepad nor keyboard (German-Swiss) are detected. Hence it is impossible to get through the install process.
View 1 Replies
View Related
Mar 25, 2010
I want to install ubuntu 9.10 on my HP nx9420. I left 48GB of unallocated space in between of windows and hp recovery partition. I attached screenshot of GParted. I need to make /dev/sda7 the home partition.
View 3 Replies
View Related
May 11, 2010
I am trying to install Ubuntu 10.04 on my Desktop and I am unable to see any partitions when trying to install I also checked to see if the partition manager would be able to see them and no luck there either.I already have windows xp and OpenSuse installed on the hard drive.
View 8 Replies
View Related
Mar 30, 2011
I am trying to duel boot win 7 and ubuntu 10.10. I have been dealing with this all day and cant figure out what's is going on. I create the partitions in windows and then reboot using a CD but when I go to select a oartition ubuntu do sent see any partitions its a totally blank drive. I have even wiped the drive totally and tried fresh install of windows and then creating partitions', even booted into the live CD area and it still dosent see any partitions just a blank drive. What am I doing wrong, or what is going wrong to cause this?
Running windows 7 x64 trying to install 10.10 x64
View 9 Replies
View Related
Mar 22, 2011
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
View 9 Replies
View Related
Feb 24, 2010
I'm trying to install Ubuntu 9.10 on a Asus P5KPL-VM mainboard. However the installation doesn't recognize my partitions. If I just boot Ubuntu the partitions are recognized with GParted and by just mounting them and browsing in file explorer. I'm using a SATA disk. I've tried boot option pci=nommconf irqpoll as found in this thread [URL] with no success.
View 2 Replies
View Related
Mar 3, 2010
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
View 3 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Apr 2, 2011
I just installed 11.4 and I get an error when I try to boot, "fsck failed for at least one filesystem". It's referring to sdc2, which is my /. This drive is a 1.5gb SATA drive, and it may be that this drive is very slow to initialize. I used to have a problem in Windows where this same drive wouldn't be detected after waking from sleep, so I had to apply a hotfix patch.
I tried manually fsck-ing, but the drive isn't detected at all. Maybe some way I can make it wait longer for the drive?
View 3 Replies
View Related
Jan 9, 2010
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies
View Related
May 9, 2010
Trying a minimal install with the mini.iso. I don't have a wired internet connection, only wireless from my iPhone which works fine with my full install of Ubuntu. The installer is not able to find my wireless connection stating "No Network Interfaces Detected". I did try to install yesterday in town with a friends wired internet connection and I got the same result. I'm able to get to the command line in the installer but have no idea how to start my wireless connection so the install can continue. I have searched here, and elsewhere on the net to the point of giving up.
View 7 Replies
View Related
Jul 18, 2010
I'm trying to do a minimal install via a USB flash drive. Everything was good until it tried to recognize my network (wired). It showed "No Network Interfaces Detected" (On Ubuntu and Debian). I wish to do a minimal install since I want to install the programs I want myself. Plus, I have a small flash drive.
I'm using an Atheros AR8151 PCI-E as my card (as shown by Windows). I also have a wireless, though I don't care much about that, wired will probably be easier. Through the command shell, I can see Ethernet Controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0). When I do plug the Ethernet cable in, I don't get the lights on during Linux installation but they do come on in Windows. If I need some additional driver, can I somehow add it to the minimal installation? I was looking through the log file and found that i82365 could not be loaded, a PCMCIA controller. I'm assuming this is separate from the NIC and interfaces between the bus and the NIC.
no idea whether it's because it couldn't find the drivers or because the controller was incorrectly identified. But I'm pretty sure this is why I can't get my network card to work.
View 3 Replies
View Related
May 1, 2010
I'm currently running a Ubuntu 9.10 64bit machine with one of those 2TB WD disks that does have 4KB blocks.Unfortunately the current partition layout is misaligned, so I plan to back up my home directory and start fresh with a 10.04 install, trying to make the partitions aligned as suggested here:what I'm wondering is, does the 10.04 partitioning program take care of the alignment today or I have to resort doing manual partitioning with a separate tool?
View 1 Replies
View Related
Jul 2, 2010
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
View 9 Replies
View Related
Feb 9, 2011
I am attempting to install 10.10 from the iso because I have no working cdrom. I uncompressed the .iso to a ext3 partitions and put the correct entries in the menu.lst file. It starts ok. The problem occurs when I attempt to install to the hard drive. At a point I get the error,
Failed to unmount partitions The installer needs to commit changes to the partition tables, but cannot do so because partitions on the following mount points could not be unmounted./cdrom I have a choice of continue or go back. If I continue the install hangs. If I go back I cannot continue. How do I fix this problem?
View 1 Replies
View Related
May 10, 2011
I have Ubuntu 10.04 (32bit) alongside Windows Vista currently. I tried to install Ubuntu 11.04 (64bit) from a bootable USB stick and found out that none of the current partitions are visible.
My PC is a Dell Inspiron 1525 with dual core Pentiums. Here are my partitions. I am reporting all this back from my current, stable Ubuntu 10.04 platform:
Code:
~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
View 9 Replies
View Related
Oct 5, 2010
I tried to install Debian 3 at my pc, and while it worked, it only installed the basic system. When it goes trying to install the "everyday-use" packages it cames with this message:Some error ocurred while unpacking. I am going tp configure the packages that were installed. This may result in duplicate errors or erros caused by missing dependencies. This is ok, only the erros above this message are important. Please fix them and Install again
View 8 Replies
View Related
Feb 16, 2010
Having an issue with a fresh install which gets stuck at partitions formatting 33%. Tried different HDD's, 2 optical drives, 4 sticks of RAM, different SATA cable, disconnect floppy. Have tried both normal and alt cd images using different burn speeds.
View 5 Replies
View Related
Feb 14, 2011
Hey guys,
I' trying to install 10.10 Desktop from a CD onto a Dell E5410 notebook with Windows 7 installed.
The problem is that during the installation, the installer doesn't see the Windows partition, moreover, it doesn't see _any_ other partition.
I've tried with CentOS 5.5 as well and it returned some error related to GPT Partition Table corrupt which might have been corrupted by a software (or not).
Removing Windows 7 completely is not an option, there's a bunch of business applications which will not run on Linux even with Wine.
I'm not sure if the problem lies on the hardware, or the installer.
The BIOS provides advanced UEFI boot options and legacy boot, but this doesn't explain why no partition is discovered.
Tech specs: core i5, 4GB ram, 320 GB disk space. The installer is 32 bit, but I'm quite the architecture doesn't really matter.
If someone has more knowledge about this kind of issue, any answer is welcome.
View 9 Replies
View Related
Aug 11, 2010
I am trying to install squeeze on a new netbook Packard Bell Dot S2 installer fails at not able to make an ethernet connection through this >> Atheros AR8131/AR8132 Gigabit/Fast Ethernet Controller. So i am unable to make progress with the install? I am using the debian-testing-i386-businesscard image.
I also have a wireless connection but thats a wpa setup that doesnt seem to be supported on the installer just wep or am I wrong?
View 4 Replies
View Related
Jun 17, 2010
I'm an old user of Ubuntu/Linux but have stumbled across my first major problem in years. I just can't get my head around it.I own a Asus Eee Pc 1005HA it has roughly 160gb and is currently running WinXP. I'm trying to install the latest Netbook remix 10.04 onto the machine as a dual boot option.I've loaded the iso onto a usb drive and everything works perfectly. The problem is during installation. I can't work out how to set up the partitions for a dual boot option. Below is the current configuration on the system.
/DEV/SDA
/DEV/SDA1/NTFS 77375MB Windows XP Partition
/DEV/SDA2/NTFS 77366MB Free space
[code]....
I would like to use the free space as my Ubuntu installation. Can anyone advise me on the best way to install this without affecting my WinXP system.
View 3 Replies
View Related
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
View Related
Jun 1, 2013
I'm a long time user of Debian, but I'm having trouble with my partitioning process. Here is where I currently stand:
I am installing the latest Wheezy build. I am trying to install debian with an encrypted LVM that spans two hard disks.
My partitioning layout is as:
1. /home
2. /root
3. swap
4. /boot
I then added partitions 1, 2 and 3 to a physical volume group. I then took that physical volume group and added it to a logical volume. Then I encrypted the logical volume, leaving the /boot partition untouched. I was under the assumption that the only partition the system needed free to reach the loading of the LVM is the /boot partition, as it holds the files necessary for booting. But when I attempt to finalize the disk, it gives an error stating, "No root file system detected". That would be an issue as it is currently sitting inside the encrypted LV. Am I wrong in including the root partition in the encrypted LV?
What is the best way of having as little of my file system non-encrypted as possible while still allowing a proper boot?
View 9 Replies
View Related
