Ubuntu Installation :: Can I Install Mac OS VMware On System
Feb 22, 2011I wanted to know whether ubuntu allows installation of VMware machines as Windows does. And if it does, how do I do it.
View 3 RepliesI wanted to know whether ubuntu allows installation of VMware machines as Windows does. And if it does, how do I do it.
View 3 RepliesIs it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedIS there a secret to install Red Hat 5.6 on WMWare Workstantion?
View 2 Replies View RelatedCan i install vmware product on a linux machine and which linux distribution fits best?
View 4 Replies View RelatedI have just bought two SSD, Intel X25-M 80GB, to install Ubuntu 10.04 64-bit server with vmware on a computer with 8GB RAM. I have tried to find out how to set up the system, but is somewhat confused on the setup. The idea is to use software raid to aviod data loss if one SSD is giving up in the future. When installing I have thought about using tree partitions.Swap Root Vmware vhd When reading about how to optimize vwware I found this:
Quote: Disks, Disks, Disks: I always attempt to put my guest OSs on their own partition and I format that partition thusly because VMWare server reads guests in huge blocks (/dev/sdb1 is the partition my guests reside on): mke2fs -b 4096 -R stride=8 /dev/sdb1
Then I set the block readahead value to somewhere around 16384, but you can go as high as twice that value (in my case this is an entire disk array, so I dropped the partition indicator): blockdev �setra 16384 /dev/sdb
How should I setup the file system on each partition? When using an SSD, each partition should be aligned. How do I do that? Let say I would like to have 4GB swap, 60GB root and the rest for vmware. At last, I have fount out that full support for TRIM is supported by kernel v2.6.33. Ubuntu 10.04 is using v2.6.32? If so, for full TRIM support I must upgrade kernel to v2.6.33.
i was thinking is it possible to port an entire linux installation onto another operating system using vmware for example? what i mean is that is it possible to create an image of a hard drive and let it work through vmware as client from another OS?
View 8 Replies View RelatedI want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
Actually I found a discussion on this topic. But my problem a bit different from the discussion made over there...The major discussion in that topic is related to the Graphics Issue. But my problem is with the CPU(as my machine says so).... I am posting my screenshot herewith. Please take some time to review it. This would be grateful.
Actually the error says: "This Kernel requires an x86-64 CPU. but only detected i686 CPU. Unable to Boot - please use a kernel appropriate for ur CPU." What does this mean?? My machine has Intel Core 2 Duo t6600 processor. Is Virtualization Playing a role in this issue...??
I have installed vmware but it is asking for GCC 4.3.2
GNC C Compiler (gcc) Version 4.3.2
how do I download, compile and install it?
I'm looking to install either vmware server, virtualbox or another solution.
Which works the best with fedora 11? I'm interested in USB and performance.
btw, I wasn't sure which forum to put this in
I have Vmware Fusion 2.0.6 (196839) running on my MacBook Pro. I installed Fedora 11 on the fusion and it works fine. The only problem that I am having is that when I try to install vmware tools, by runnning ./vmware-install.pl in the terminal, I am prompted with this message: What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]
If I press Enter, the same message pops up. I am fairly new to linux, and I am just setting this up so I can set up a web server on this virtual machine for testing purposes.
the kernel that I have running is:
root@box1 include# uname -r
2.6.30.8-64.fc11.i686.PAE
I've looked through the forums and found that installing openmotif may fix my problem. I tried it but to no avail. Here is my challenge, I'm trying to install Grid Engine on my VMWare fedora installation. I get this dependency error:
Quote:
rpm -i sun-sge-bin-linux24-x64-6.2-5.x86_64.rpm
error: Failed dependencies:
libXm.so.3()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
libXp.so.6()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
sun-sge-common = 6.2 is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
I installed the latest version of openmotif and when I do a search for the two files, there is no libxm.so.3 but libxp.so.6 is there. When I try to install the rpm again I still get the exact same error.
I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
I have installed Windows 7 Ultimate 7600 on my HP500 Laptop, but I want to try other linux distro such as Debian. I have installed Debian 5.0.3 with VMware Workstation 7.0.1 on my machine instead of really installed it. Details is as follows: 1.Download vmware 7.0.1 and Debian Lenny 5.0.3 seperately.
2.Host Win 7 Ultimate 7600:
configure the local connection to "internet connection share",choose "VMware Network Adapter VMnet1"
Guest Debian 5.0.3: NAT + DHCP
3. Configurate /etc/apt/source.lists
Add these lines on /etc/apt/sources.list:
[Code]...
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
I have a native 64 bit 11.3 system with vmware 7.0x as an application. I have installed a win 7 guest which works fine 99% of the time. But if I try to plug usb headphones into my system after I boot win 7, it will crash entire system, but if I plug headphones into system before loading vmware, this does not happen. Is this a kernel issue?
View 1 Replies View RelatedI completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedI am running an up to date Debian Lenny system with vmware 1.08 server installed.
When I run vmware, it appears to start normally. However, when I try to open a previously created image (from a different machine), everything is fine until I hit browse, which causes a screen to pop up that syas "The folder contents could not be displayed VFS error: Invlalid paramteres." and the following shows up on the command line:
Code:
I am running Windows 7 and wanted to install VMWare and Ubuntu on it. So I downloaded VMware and the Ubuntu install files but I got stuck on the Language prompt. So I researched and downloaded Ubuntu alternate iso file and the install went fine.
I now launch VMWare and get a prompt for username and Password which I enter.
I just installed it and have been struggling with many tutorials to instal VMWare, I already installed wine and can't run my video chat messenger windows clients like yahoo and camfrog properly, lots of crashing and direct 3d issues and can't open cams etc.. so i'm trying to put vmware server 2 on my system and run my windows partition in linux at the same time.. so i can still have my windows stuff while i learn on linux. But i can't get it installed correctly... now I'm not sure what all i've really done.. installed all types of vmware and rpacket software through synaptic package manager. uniinstalled some.. trying to us VM1.x from some tutorials for it to never quit work.. i had a server icon at one time but when i clicked it nothing would happen. my last attempt was on VMware 2 btw i'm ubuntu 10.04. and this is were i first notice the issue.
Stopping VMware autostart virtual machines:
From there its just one thing after the next like...
Eventually it ends with this:
Using 2.6.x kernel build system.
Unable to build the vmmon module.
For more information on how to troubleshoot module-related problems, please visit our Web site at [url] and [url].
Execution aborted.
how to install VMware Server on Ubuntu Server 10.10?I would like to setup a couple of virtual machines on Ubuntu Server, but I can't find any documentation on how to do it.
View 1 Replies View Relatedi install Ubuntu 10.4 in VMware, and i install already the vmware tools, but sound is not working..
the message is..
The device ID has been used that is full out of range for your system. Sound will be disconnected.
I have installed Vmware server 2 on ubuntu 10.04. I am able to work on vmware using a browser [URL]. Now I need to install trixbox using vmware. How can I do that? I created a new virtual machine, but when I search for an iso image. I am getting the following screen. Where can I place my iso image? what is the standard? I have attached the image.
View 1 Replies View RelatedHow do i install vmware tools on 11.2? I uninstalled the open-vmtools non-sense removed the remaining modules from it (no clean work from suse here) installed gcc, make, kernel-source and kernel-headers installed the vmware-tools rpm i started vmware-configure-tools and it says that my kernel was built with gcc 4.4.1 while i try to use version 4.4 now.(if i do a 'gcc -v' it clearly says version 4.4.1) so what ?! I said "yes" here, it tries to build the memory moudle and fails......
View 9 Replies View RelatedWhen I try to install vmware-player it complains that it can't find the kernel headers for my running kernel (2.6.31-20-generic) to compile its modules. I did have this working on 9.10. No amount of googling revealed the name of the package I need to get this working in Lucid.
View 2 Replies View RelatedI have Ubuntu 9.10 on my desktop with VMware installed to use some windows software. If I upgrade to 10.04 LTS, will I have to re-install VMware and all the windows software?
View 2 Replies View Related