i install Ubuntu 10.4 in VMware, and i install already the vmware tools, but sound is not working..
the message is..
The device ID has been used that is full out of range for your system. Sound will be disconnected.
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedI'm trying to figure out what in the world is going on with my sound in OpenSuSE. I put in a brand new Audigy chipset soundcard and finally got some sound to come out of the speakers. I used the guide here: SDB:AudioTroubleshooting - openSUSE. to fix the permissions on my sound and am able to get sound-test to play sounds as well as connect to the sound device in my vmware and play sounds. That being said, I have terrible sound quality coming out. There is a lot of static sound like white noise and the volume of the actual sound played is very low compared to the noise. The sounds also distort somewhat.
I have tried the pulse audio change in the tutorial above also and have been searching around google. The only problem that I saw similar was a person who fixed the problem by updating KDE. I don't have KDE, I'm using Afterstep.
I am running 64-bit (version 9.10) on a VMWare workstation. I am having an issue with my sound card. This is the message that I get when I start the VM:A device ID has been used that is out of range for your system. Sound will be disconnected I am running Vista-64 as my host OS. I know it might be easy to blame this on Windows, but I also have an XP guest OS and sound works fine there, so it is definitely an Ubuntu related issue.
View 1 Replies View RelatedI want sound and internet access thru Linux using VMware. It will give me confidence to add it as a dual boot to my hard drive. I have sound and internet access thru Windows 7. I have sound thru the sound card test but I'm not able to hear cd's. I see the time elapsing thru the cd player but no sound.
I'm having problems with the network configuration, I get the message, "cannot activate the device etho:1 no link found". I have a DSL connect thru windows. Shouldn't I be able to get the internet thru VMware? If so how?
I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedI am running an up to date Debian Lenny system with vmware 1.08 server installed.
When I run vmware, it appears to start normally. However, when I try to open a previously created image (from a different machine), everything is fine until I hit browse, which causes a screen to pop up that syas "The folder contents could not be displayed VFS error: Invlalid paramteres." and the following shows up on the command line:
Code:
I just installed it and have been struggling with many tutorials to instal VMWare, I already installed wine and can't run my video chat messenger windows clients like yahoo and camfrog properly, lots of crashing and direct 3d issues and can't open cams etc.. so i'm trying to put vmware server 2 on my system and run my windows partition in linux at the same time.. so i can still have my windows stuff while i learn on linux. But i can't get it installed correctly... now I'm not sure what all i've really done.. installed all types of vmware and rpacket software through synaptic package manager. uniinstalled some.. trying to us VM1.x from some tutorials for it to never quit work.. i had a server icon at one time but when i clicked it nothing would happen. my last attempt was on VMware 2 btw i'm ubuntu 10.04. and this is were i first notice the issue.
Stopping VMware autostart virtual machines:
From there its just one thing after the next like...
Eventually it ends with this:
Using 2.6.x kernel build system.
Unable to build the vmmon module.
For more information on how to troubleshoot module-related problems, please visit our Web site at [url] and [url].
Execution aborted.
how to install VMware Server on Ubuntu Server 10.10?I would like to setup a couple of virtual machines on Ubuntu Server, but I can't find any documentation on how to do it.
View 1 Replies View RelatedI have installed Vmware server 2 on ubuntu 10.04. I am able to work on vmware using a browser [URL]. Now I need to install trixbox using vmware. How can I do that? I created a new virtual machine, but when I search for an iso image. I am getting the following screen. Where can I place my iso image? what is the standard? I have attached the image.
View 1 Replies View RelatedHow do i install vmware tools on 11.2? I uninstalled the open-vmtools non-sense removed the remaining modules from it (no clean work from suse here) installed gcc, make, kernel-source and kernel-headers installed the vmware-tools rpm i started vmware-configure-tools and it says that my kernel was built with gcc 4.4.1 while i try to use version 4.4 now.(if i do a 'gcc -v' it clearly says version 4.4.1) so what ?! I said "yes" here, it tries to build the memory moudle and fails......
View 9 Replies View RelatedWhen I try to install vmware-player it complains that it can't find the kernel headers for my running kernel (2.6.31-20-generic) to compile its modules. I did have this working on 9.10. No amount of googling revealed the name of the package I need to get this working in Lucid.
View 2 Replies View RelatedI have Ubuntu 9.10 on my desktop with VMware installed to use some windows software. If I upgrade to 10.04 LTS, will I have to re-install VMware and all the windows software?
View 2 Replies View RelatedI am using ubuntu 10.10 on vmware. my system os is mac os x 10.6. i am not able to install apache2. i get a message functional dependency can not be resolved. this error could be caused by required additional software packages which are missing or not installable. i run command on terminal sudo apt-get install apache2. it gives a big paragraph and at the end says E: broken packages.
View 1 Replies View RelatedI wanted to know whether ubuntu allows installation of VMware machines as Windows does. And if it does, how do I do it.
View 3 Replies View RelatedI've been trying to install VMware workstation 7.1.4- but I've run into a problem. Due some bugs i've had to install vmware a couple of times. Now one time I removed /etc/vmware before uninstalling it. This might be stupid but after I've done this vmware wouldn't uninstall anymore. It would say that there where instances of vmware running though I've never even been at the point that I ran vmware. The installer would say that vmware was already installed so it wouldn't install either. Now I've removed as much vmware files as I could find. But now if I run
Code:
sudo sh vmware-workstation-full-7.1.4-385536.i386.bundle
It wil say
Quote:
Extracting VMware Installer...done.
And then nothing. It will just silently quit. It doesn't give an error, it doesn't start the installer GUI, it will just quit. Now I suspect there are vmware files somewhere that confuse the installer but I've no idea if this is true or where these files are. how to completly wipe any vmware-workstation file from my computer as if vmware was never installed?
EDIT: if I run sh vmware-workstation-full-7.1.4-385536.i386.bundle -r, it will show the installer again but show that vmware is already installed
iam trying too install ubuntu 9.10 32 bit on vmware version 7.everytime i get too this window for the install,it wont let me go any further.
[URL]
i tried everything i can think of but it just wont go past that screen.ive installed it in older version,but this one just doesnt work for me.
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
I seem to be having a problem getting VMware 2.0.2-203138 installed on Fedora 13.I've downloaded the rpm from VWware's site, and ran rpm -iv VMware-server-2.0.2-203138.i386.rpmAfter I ran vmware-config.plIt came back saying it will use complier /usr/bin/gcc and asks me for the location of the C header files.I tell it /usr/src/kernels/2.6.33.6-147.2.4.fc13.i686/include but it comes back with the following error message
Code:
The directory of kernel headers (version @@VMWARE@@ UTS_RELEASE) does not match
your running kernel (version 2.6.33.6-147.2.4.fc13.i686). Even if the module were to
[code]....
I'm trying to install ns-allinone-2.34 in Ubuntu 10.04 using vmware workstation and while installing i got -
[Code]...
I want to install vmware server on fedora 11. I have tried to and have had issues. how to install.
View 14 Replies View RelatedIs it possible sitn opensuse 11.2 to install vmware server or another free vmware?
View 9 Replies View RelatedI can't get Vmware Workstation 7.1 to install on 11.3.
Nothing to be found in VMware logfiles, the installer just rolls back the installation.
Is there anyone who has any idea on how to make it work?
(I install all the required modules by the way)
I'm thinking about installing OpenSuse 11.3.
Before loosing a long time... install VMWare Server on OpenSuse 11.3?
i am using Open Suse 11.4 as VMWare guest, I installed the Open Suse on the Guest using the Live CD and when I am trying to install vmware-tools am getting an error that its not able to find the linux-headers I have installed all other prereq's using zypper, when i try to do zypper in linux-kernel-headers am getting this error
Loading repository data...
Reading installed packages...
'linux-kernel-headers' not found in package names. Trying capabilities.
'linux-glibc-devel' providing 'linux-kernel-headers' is already installed.
Resolving package dependencies...
resolve this ? Is there any way i can specify the linux-glibc-devel' providing 'linux-kernel-headers' for the vmware tools so that the installation is completed successfully
I get an unhandled exception when installing CentOS 5.5 64bit in vmware. In the details the tracebacks most recent calls seemingly involve python. I have uploaded an image of the exception window:
View 1 Replies View Related