Ubuntu Installation :: Another 'no Boot After Update'?

Nov 30, 2010

jump straight in with a problem. I'm experiencing the same problem mentioned here; where it was suggested to start an individual thread.I have been using ubuntu as a dual boot with vista for a couple of months. Apart from a few hiccups I've been very pleased, but after an update I am unable to boot ubuntu. It appears to be the same issue in the link above.

I originally installed 10.4 (because my first attempt with 10.10 would not install (turned out to be duff CD)) and then updated to 10.10. All was fine until this latest automatic update.I've tried a few things suggested -- copying the c:ubuntuwinbootwubildr file over c:wubildr -- with no luck... I'm worried about making things worse and thought I'd ask first. I hope that's OK.I also tried working from my liveCD, but it only gave me the option to install (because it's 10.4 and I've updated?

View 9 Replies


ADVERTISEMENT

Ubuntu Installation :: Can't Boot After Update

Oct 11, 2010

I updated from 10.04 to 10.10 this afternoon, and after a reboot, I can't start ubuntu in the new kernel. Grub shows up fine, but after selecting the new kernel, all disk activity stops after a while. When booting in safe mode, the same thing happens.

Oddly, booting in the old kernel does work. I'm not sure which log files might be of use here, so haven't gotten much further..

[edit] Just tried to boot in the livecd, doesn't work either, same problem.... I guess there is a driver problem somewhere most likely

View 5 Replies View Related

Ubuntu Installation :: Can't Boot After Update To 10.26

Nov 26, 2010

After update Ubuntu to 10.26 from 10.25...UpdateMgr asked to "restart". I did and since then I can't boot Ubuntu from my PC (Window Vista).

View 4 Replies View Related

Ubuntu Installation :: After Update To 11.04 Won't Boot

May 1, 2011

I updated to 11.04, looked down after about an hour and a half, and my laptop was off. Now when I turn it on, it acts like it's checking my desk, but it says something like "/ is not available or doesn't exist press s to skip, or m to manually recover" then when you skip it's like "/mnt is not available" It could be possible I accidentally turned it off during the upgrade.

View 7 Replies View Related

Ubuntu Installation :: Cannot Boot After Update

Jul 12, 2011

I recently installed Ubuntu 11.04 via wubi.exe to dual-boot between Ubuntu and Windows XP Home Edition. Ubuntu was the default OS to load on boot. I tried running a few updates in Ubuntu through the update manager, followed the instructions in the wizard, and restarted my computer when asked. The computer now automatically boots straight into the "GNU GRUB version 1.99~rc1-13ubuntu3 Minimum BASH-like line editing is supported..."

I have only just started to get into Linux. I have no idea how to get through this portion. I can't load back into Windows either (at least...I'm not sure how to. I never get the opportunity to choose which OS to launch). I've tried researching this issue, but still not having a lot of success. My only current option is to completely reformat my HD, but this is (hopefully) not going to be needed. If I could just get back into Windows I think I could probably reinstall with Wubi.

View 3 Replies View Related

Ubuntu Installation :: 11.04 Won't Boot After Update

Aug 10, 2011

Yesterday I got installed Ubuntu 11.04. After I got updated with update manager everything was OK until I rebooted the system so that update can tack effect. When I rebooted It's stuck in the middle of something. (No GUI). I tried recovery mode but same thing. Then I tried Previous version and it worked fine. Now I can boot into system but each time I need to select previous version.

View 1 Replies View Related

Ubuntu Installation :: System Won't Boot After Update

Jan 11, 2010

I just allowed Update Manager to install the latest security updates to the Linux kernel, header and xorg and clicked on restart system. After selecting Ubuntu from the system's boot manager I'm dropped into a Grub command line and don't have any idea what to do next. I'm running Ubuntu 9.10 inside Windows 7 on a Toshiba L500 laptop using the Wubi setup.

View 9 Replies View Related

Ubuntu Installation :: Unable To Boot In Any Os After Update?

Feb 4, 2010

today when i updated my ubuntu 9.10 it was about 44mb update and update manager was not able to download 13mb of files i clicked continue anyway. after that i shut down my pc and when i restarted it my old black and ordinary GRUB was gone and there was one with Debian symbol and blue background and everything and when i selected any OS ( i have 3 os 1 on my 80GB hard disk which is ubuntu and other 2 are debian and windows XP which are on 20GB hard disk) and it said

invalid character '+' file not found.

so i am now running on live cd.

View 9 Replies View Related

Ubuntu Installation :: Boot Error After Update

Feb 22, 2010

I got a grub error each time after updating ubuntu. I have to boot the system manually, and then update grub2. Now I am really scared to update. I thought this bug would be solved very soon, but it is still there. I can't bare it anymore.

View 2 Replies View Related

Ubuntu Installation :: Update To 9.1 - Unable To Boot ?

Mar 9, 2010

Just did an update to 9.1 & now am unable to boot to ubuntu, windows7 still boots ok. Didnt pay much attention to the update but did notice there were a lot of cups files. Booting to ubuntu get something about using a tab & then getting a list of commands one can do. Tried boot got 'no kernel' tried exit & got a pc reboot which let me back to the tab msg.

View 2 Replies View Related

Ubuntu Installation :: Update And Then Cant Boot To Grub?

Aug 20, 2010

I am dual booting Windows Vista and Ubuntu 10.04 with WUBI. (Windows works fine). When I updated Ubuntu from the update manager, it just gives me this error code from a JPG attachment I just added with this post. It keeps on saying that every time ubuntu boots up.Is there a Fix? I cant boot up to ubuntu at all...

View 1 Replies View Related

Ubuntu Installation :: Regular Update Now Can't Boot From HD Or CD?

Oct 7, 2010

I updated my Ubuntu 10.04 on Dell 1330 and on the next boot it failed. I get a series of messages, the main point seems to be that it can't find the files it needs to mount.I tried booting from the live cd I used to install 10.04, but it can't boot either due to wrong user id error and maybe trying to boot from wrong kernel?At this point I am willing to just wipe the hard drive and do a fresh install but how to do that if I can't run the install cd?Or is there a way from initramfs to solve this?I tried mount /dev/sda1/mnt but it says cannot read /etc/fstab no such file.libdevmapper

View 9 Replies View Related

Ubuntu Installation :: Update Dual Boot 10.04 To 10.10?

Oct 17, 2010

So i have a second PC, which has 2 HDD's in it. Windows 7 is installed on the first HDD, (640GB) and i have Ubuntu 10.04 installed on the second HDD (80GB). This was done basically by "OldFred" 's directions.[URL]...(First few posts on thread i linked will inform how i have my Dual boot setup) So far i haven't really used Ubuntu much. And from reading on here, 10.10 isnt to stable, but still im interested in knowing:

Is it safe (considering my dual boot setup) to update my Ubuntu version? I am assuming when in my 10.04 it would tell me a new version is out, but maybe it doesnt upgrade like that, you tell me please. Basically i am concerned for messing up my dual boot setup considering if something goes wrong , i dont want to mess up my Windows 7 OS or the time taken to successfully install the dual boot.

View 4 Replies View Related

Ubuntu Installation :: Hangs During Boot After Update To 11.04?

May 3, 2011

My GRUB is at v1.5 and have just updated UBUNTU to 11.04 from 10.10 I have a AMD processor and am using the 64 bit version of UBUNTU

The system will not start normally, it will hang. with this on the screen

Boot from (hd0,0) ext3 9a590bb3-d88b-40e5-8e48-46c83c0865dd
Starting up ...

I have discovered a way to boot I select the recovery mode then I select failsafeX , next I select restartX . And the system will boot,

I am looking for guidance on what to do to get my system to boot normally without having to use the workaround that I now use,

View 3 Replies View Related

Ubuntu Installation :: Won't Boot After Kernel Update / Sort It?

Feb 8, 2010

Update manager reported some updates including kernel update to version 2.6.31-19.

after update system won't boot. it crashes into bash shell. I've manually loaded kernel version 16 with following command code...

same thing happened when version 17 came up. I definitely NEVER again going to update kernel. What do I need to do now? should I uninstall latest kernel...if that is possible?

View 2 Replies View Related

Ubuntu Installation :: System Will Not Boot On Restart After Update?

Apr 24, 2010

I installed Lucid Beta a few days ago and was happy with the way everything worked. The system wanted an update on Thursday night, I installed it and then carried on using it for about an hour, it was then shutdown normally with no errors. On Friday morning it would not boot. I pressed the "on" button it came on, all the other lamps lit ie Caps and Num Lock, the battery light is on anyway, but the hard drive light is not flashing, it's as though it isn't being accessed, but I can hear it? There is no display on the screen. I'm running an Acer Aspire One. My initial thoughts are bios related, but I can't see how that would have changed, then I think maybe the Harddrive is knackered.

View 7 Replies View Related

Ubuntu Installation :: 10.04 Boot Failure After 2010-05-26 Update

May 28, 2010

After performing the periodic update on 2010-05-26 including libc, libc6 and libgtk2.0 my system fails on boot with the following error message:

Code:
run-init: /sbin/init: no such file or directory

Kernel panic - not syncing: Attempted to kill init! If I boot from the 10.04 live CD, all partitions on the hard drive are visible, mountable, and pass all file system checks.

View 2 Replies View Related

Ubuntu Installation :: Grub2: No Way To Update The Boot Menu?

Jun 25, 2010

I upgraded my main box to Ubuntu 10.04 and everything runs fine, except for a problem with grub: I can't modify the boot menu in any way, I'm stuck with what grub2 thought was the optimal setup at installation time (and it got it wrong, btw). The current boot menu lists:

- my older 9.10 install in sdb2 (one kernel)
- legacy windows XP install on sda1
- my even older 9.04 install in sdb1 (two kernel versions)
- my new install in sdb3, with only one kernel (the one coming with the distro CD)

I tried anything I could think of to modify this menu:

- modify the /etc grub config file then running sudo update-grub
- using a specific app (system manager? don't remember its name)
- upgrading to the latest kernel
- removing and reinstalling grub

to no avail: the menu is still there in the above form, and I have to manually select the 10.04 (old) kernel by hand every time I reboot.

View 9 Replies View Related

Ubuntu Installation :: Can't Boot Windows 7 After Grub Update

Jul 21, 2010

I have been phenomenally unlucky with Ubuntu as seen my my post history and decided to dual boot.

I set it all up with a clean install, when I tried to load Windows from Grub the computer restarted. After much headache I managed to set it up correctly (when it wouldn't load from Grub I booted from the Windows CD and clicked on "Repair computer" and it finally worked).

Now I am having the same problem as before--I think my installed all the updates from Update Manager and it included a grub one. Now I can't load Windows from the grub menu: It goes to the Starting Windows screen and then reboots my computer. If I do it again it gives me an error message and an option to perform "Startup repair". When I try to do Startup Repair, the computer reboots after a few loading screens.

So I tried what worked before and put in my Windows 7 CD, and clicked on Repair Computer. BUT NOW it gives me an error message somewhere along the lines of system restore is not compatible with my installation of Windows, and to insert a compatible recovery CD. This is the ONLY Windows CD I have (legitimate copy).

Over the course of this migration experiment I have installed and reinstalled both operating systems 7-10 times total. I'd rather not do it again. My poor laptop is probably wondering what the heck.

I can't stick with Ubuntu alone because my wireless doesn't work with it, my grad school files are not completely compatible with open source software, and I can't play the games I'd like to. So I must have the option to at least dual boot into Windows.

When selecting Windows it restarts the computer entirely to the Compaq screen, not just to the Grub menu, if that matters.

View 9 Replies View Related

Ubuntu Installation :: Unable To Boot Up After Update Failure

Sep 30, 2010

This morning my update manager came up so I clicked to update. About halfway through the update an error message popped up & said to restart my system. I restarted my system and now have a black screen with the following message:

mountall: symbol lookup error: mountall: undefined symbol: udev_monitor_filter_a

dd_match_subsystem_devtype

init: mountall main process (344) terminated with status 127

I read around earlier & tried to use a Ubuntu disk and reboot but I have the same error.

I'm using a Dell Inspiron computer, it's just over a year old. I keep up with all the updates but unfortunately cannot say for sure which updates were taking place because I just hit the update box.

View 1 Replies View Related

Ubuntu Installation :: Can't Boot After Update Header, Kernel First?

Oct 29, 2010

After getting everything running nicely on 10.10 (after dozens of installs - long story, partially raid problem, partially noob, partially partitioning and Windows), I'm stuck with an unbootable 10.10.I selected all the "important security updates" when the update manager told me I needed to update everything. Upon rebooting, and picking ubuntu in grub, I get:

Error: unknown command 'record fail'Error: cannot read the Linux header Error: you need to load the kernel first Not exactly sure why at this point. Can anyone point me in the right direction? I can probably get in either through a 10.04 version that I have on another HDD, or through the livecd.

Note: if it's important, I did not elect to install the ATI proprietary drivers, and this is also the first update that I've done after installing medibuntu - a few boot cycles in between, so I don't think it's related.

View 5 Replies View Related

Installation :: Can't Boot Windows / Ubuntu After Its Update - Resolve This?

Dec 22, 2010

Cant boot windows or ubuntu
Well i have two hard drives, i used wubi on windows (which is on my c: drive) to put ubuntu 10.10 on my d: drive. Everything was running smoothly until the update manager uptated ubuntu. When the installation was completed, i was told to restart. So i did. When it restarted, nothing happened. My computer froze and i cant access windows or ubuntu, and i cant change anything.

View 2 Replies View Related

Ubuntu Installation :: Boot Failure After Kernel Update

Mar 25, 2011

After a kernel update ubuntu would not boot. So found this procedure using the live update cd. Update grub.cfg & delete everything down to but not including the first line that starts with 'menuentry' . Then boot works ok. A couple of weeks ago it started on my notebook. Is anyone @ hq listening & able to fix this problem permanently?

View 9 Replies View Related

Fedora Installation :: F12 - Cannot Boot After First Update

Dec 29, 2009

I have successfully installed Fedora 12 today on a Dell M6400 from a live usb stick. Everything went very well. After the installation I rebooted, and updated the system. Then rebooted again, and now I get this message. No bootable partition in table. Apparently something in the update is broken... Is there a buggy kernel version I should be aware of? Should mention that I have two disks in a hardware raid 1. I left a none-bootable USB key in the computer when rebooting.

View 1 Replies View Related

Ubuntu Installation :: After Update - Grub Won't Boot Says Kernel Missing

Jan 9, 2010

I used the update manager to update the kernel and whatever the other recommended updates were yesterday. I shut the computer down overnight and now when i try to boot into Ubuntu 9.10 i get a basic grub shell and when i try commands like "boot" it tells me there is no kernel loaded. I installed Ubuntu with Wubi so it is a dual boot system.

I've tried to access the Linux volume with a live OpenSuse 11 CD but there is no device to mount. It sees the entire hard-drive as if it hasn't been partitioned. I don't necessarily need to fix the installation. I just need to get my files back.

View 9 Replies View Related

Ubuntu Installation :: Laptop Won't Boot After Running Update Manager?

Feb 18, 2010

I'm a little bit stuck and in need of advice from people who know what they're talking about. I've had Ubuntu on my office PC, home PC and laptop for about a year now and never had a problem that I couldn't solve, until now. I'd not turned my laptop (Lenovo N 500 with Ubuntu 9.10 64 Bit using GRUB2) on for about a month so when I did on Monday of this week I noticed that I'd not updated Ubuntu for 27 days, so ran the update manager. After everything was updated I carried on using it as normal but when I tried to turn it on yesterday I get the following issue...

GRUB loads and gives me all the possible boot options. Whatever one I choose, I get the same results. It starts to boot (I see the black screen with the white Ubuntu logo) but this remains on the screen for a very long time, then it goes to a flashing cursor at the top left of the screen and it just sits there indefinitely.

I've tried playing with Super GRUB Disc but admittedly I'm not too sure what I'm doing with it. I've tried using the Ubuntu Installation disc as a Live CD too but with no joy. The main HDD appears fine when in Live CD mode, all my files are there etc.. Is this actually a GRUB issue or something else? It's like GRUB's doing its bit and then it's failing slightly further down the line.

I'm totally out of my depth here and really don't want to have to reinstall everything, I'm sure there's a simply solution.

View 9 Replies View Related

Ubuntu Installation :: Grub Update - Can No Longer Boot Vista

Feb 27, 2010

I recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says:
"Windows cannot start. A recent upgrade or hardware change may have caused this".

And below that:
File: \boot\bcd
Status: 0xc000000e
info: An error occurred while attempting to read the boot configuration data"

When I run sudo fdisk -l, I get the following:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000080

Device Boot Start End Blocks Id System
/dev/sda1 1 6 48163+ de Dell Utility
/dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS
/dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA)
/dev/sda5 19066 19457 3148708+ dd Unknown
/dev/sda6 15937 18930 24049242 83 Linux
/dev/sda7 18931 19065 1084356 82 Linux swap / Solaris

Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.

View 4 Replies View Related

Ubuntu Installation :: Online Update To 10.04 - Loss Of Windows Boot?

May 2, 2010

Machine: Win2000 Pro, AMD64 Athlon 2GHz, 2x80Gb HD, 2 GB RAM Symptoms: Running 9.10 with dual boot no probs for ~ 1 year. Decided to upgrade online via synaptic to 10.04. Upgrade went well no warnings, etc. On reboot all OS options present in Grub BUT clicking on Win2000 causes the screen to blank temporarily and then return to the Grub menu ie. no functioning Win2000 boot option. Ubuntu 10.04 boot yields blank screen with flashing cursor, a sudden stream of IO error messages (can't capture it but the lines look identical) then screen flickers and I'm at the purple log in screen and everything proceeds perfectly from there.

Observations: For the first time on any of my ubuntu installs (i've been using since 8.04 always installing from CD though) grub installation asked where I wanted it. In fact, the screen shows all devices with check boxes wth which to make my choice. That is sdb, sdb1, sdb2, ... , sda, sda1, sda2, There was a message that says that if in doubt install on _all_. Being in doubt I checked all the boxes: sdb, sdb1, etc. I noted in the message streams that followed after i continued that some lines had "... this is BAD ..." but since it was all rolling along very quickly no idea exactly _what_ was bad.

Action: I am not a linux newb but I am a grub newb. I fished the forums and googled only to come completely confused about what the problem might be or what to do. Example: have i overwritten my win bootloader? is my mbr corrupted? if i remove grub what will happen? if i remove and reinstall grub will i get windows booting back? if i use my win2000 install CD will it overwrite my whole disk (as many warn) or can i just fix the mbr? if I do the latter what order do i ie use fix mbr then fix boot? The info i've come across so far either doesn't address what happened to me, deals with other OSs (XP, Vista), or is applied to earlier editions of grub/ubuntu. Right now I have not found a clear step by step that addresses my circumstance. Would anyone be able to provide some guidance? I need the windows boot to run some software (Matlab) that btw will not work with XP/Vista (hence the reason i still have win2k).

View 9 Replies View Related

Ubuntu Installation :: Boot To Black Screen Following Latest 10.04 Update

Jun 30, 2010

I have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.

AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650

View 7 Replies View Related

Ubuntu Installation :: After Update Boot To Grub Command Line

Sep 29, 2010

I recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved