Ubuntu Installation :: 11.04 Upgrade - No Task Or Side Panel Bar
Jul 3, 2011
When I upgraded to 11.04, Ubuntu classic works fine. However, when I log into the Unity Ubuntu, all that shows up is the background, and Desktop Items. No task bar at the top (containing the time, shutdown etc) or side panel bar, with the shortcut items. Now, while I was using 10.10, I installed 11.04 as a clean install on a different partition of my laptop. Therefore I have the system requirements. However, the upgraded 11.04 causes Unity issues.
View 1 Replies
ADVERTISEMENT
Jun 5, 2011
I'm wondering how much of my currently installed packages I can transfer to a new system...I have a HDD split in two. I have 10.4 on one half (/dev/sda6) - my working system for the last year or so since my last upgrade - and I have just installed 11.04 on the other half (/dev/sda. I wanted to check out the new version rather than upgrading. note I have my home folder and all stored data on other drives (zfs mirrored disks) - the boot disk is mostly OS related... I can overwrite /dev/sda8 with impunity as long as /dev/sda6 is intact....
What I want to do is capture the wide variety of packages I have installed on the old version and install them onto the new system - without using the dist-upgrade mechanism... I've had it fail too many times leaving me with a complete rebuild being required... is this (partially) possible or have too many core packages changed? I was especially thinking of something like [URL]
to obtain the list:
dpkg --get-selections | awk �$2 ~ /^install$/ {print $1}� > installedpackages
to reinstall:
cat installedpackages | xargs sudo aptitude install -y
another path would be to clone the entire /dev/sda6 onto /dev/sda8, boot into the duplicate and dist-upgrade that
View 1 Replies
View Related
Apr 30, 2010
This is strange a fresh install of 10.04 Lynx when i first logged in everything was cool, then i right clicked on the 4 desktop switching boxes on the bottom right corner; then the bar blipped off.Now after i re-login the bar is at the bottom but does nothing. When i open windows or anything they are not showing up, the only way I can navigate through my windows if Alt+Tab
View 9 Replies
View Related
Aug 14, 2011
Is there a way to move the side and or top task bars as well as change there properties (auto hide). I know how to add programs to the side bar but can't figure out how to change the top bar menus. When I ran 32bit thru a windows vm I had a top bar where I could access the programs and no side bar. I liked it better than the 2 bar setup in my 64bit wubi install. Can it be changed?
View 3 Replies
View Related
Apr 2, 2011
No Top Panel or Unity Panel after 11.04 Upgrade from 10.10 and it does not seem to be a common problem.
View 3 Replies
View Related
May 29, 2011
After upgrading from 10.10 to 11.04 all of a sudden, the task manager or task bar, keeps changing length. The individual window "buttons" themselves keep changing size - flashing even, and the space between them also changes. It is driving me nuts! The little system tray(?) icons no longer appear in the system tray, but all stacked on top of each other in the top left corner.
View 1 Replies
View Related
Aug 2, 2010
I have accidentally deleted the Panel in KDE. What is the window / task switcher called and how do I add it to the panel,
View 3 Replies
View Related
Aug 11, 2010
I installed UBUNTU LTS.BUt the bottom panel in which opened windows are shown has crashed
View 1 Replies
View Related
Sep 24, 2010
Will I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?
View 2 Replies
View Related
Jan 28, 2010
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
View 9 Replies
View Related
Jun 11, 2011
I installed Ubuntu 11.04 on my laptop and was looking to do the same onto my desktop.However, when I installed the 11.04 download and put it onto a disk and booted my Desktop from the disk, I went into try and the side panel that is on my laptop isn't on this one. It has the Applications, Places and System menus on the top as it was in 10.10.Is this just in the try version side of things, or how can i change it to the new side panel.....thing?
View 9 Replies
View Related
Feb 4, 2010
I installed HP Linux Imaging and Printing system yesterday and since then my panels are missing, is there a way to access the config files to correct this?
View 1 Replies
View Related
Feb 19, 2010
I have two computers running Ubuntu Gnome with Firefox. Upgrades yesterday (18 February 2010) at about 1430 MDT hours (UTC 2130 hours) broke Firefox on both machines. Firefox is present in the menu, and in /usr/bin/firefox, but it will not launch, not even from the command line. I have tried "sudo apt-get remove firefox" followed by "sudo apt-get install firefox" but the problem persists. When attempting to launch firefox, it does give me a tiny brown spot at the upper-left side of the screen. This can be expanded by dragging so that it is a full screen, labeled "Firefox" but there is no content in the screen...only blank space.
View 2 Replies
View Related
Mar 31, 2010
I did a search but for this topic and I thought it would be discussed quite a bit, did not get any results. Maybe I did not use the correct words? Anyhow, I am running Kubuntu 9.04 and wish to switch to Ubuntu Karmic 9.10. I do still want to keep Kubuntu 9.04 as a boot up option temporarily in case I have major issues with Ubuntu. Ill also need to know how to get rid of Kubuntu after Im sure all is well with Ubuntu. Finally, there are a ton of boot options (different kernels Ive upgraded to) in Grub when Kubuntu boots up. How do I get rid of those? I also have a Windows XP partition that I boot into occasionally.
View 4 Replies
View Related
Aug 10, 2010
Just installed Ubuntu 10.04 on my home laptop after testing it (and loving it) on my work desktop just this morning. First time Ubuntu user and looking to be a long one, too.Anyways, I used the "install side-by-side" on both machines, but my laptop, with Vista, has a weird side effect. At the boot screen, I chose Windows Vista and it booted the recovery tool (I forgot the exact name). I was worried at first, but when I chose the actual Windows Recovery option below it to attempt to fix it, it booted Vista. So it seems in the process of partitioning the HDD for Ubuntu I somehow switched what each partition boots. Is there a way to correct this?
View 4 Replies
View Related
Jun 27, 2011
i want to add thunderbird to the unity panel and am not sure how to do it.
View 3 Replies
View Related
Sep 1, 2011
Is there any chance to remove side panel of shotwell and have an appearance like somehow F-Spot or is there any other programs that have same appearance like F-Spot. F-Spot seems good to me but it's lacking of sorting is a bit annoying.
View 9 Replies
View Related
May 8, 2011
I installed 11.04 64 bit on my Acer Extensa 4420 the other day. It was running 10.04 32bit before. When it booted up the first time it said that it had some video issue and would boot in classic mode. I rebooted and selected the regular Ubuntu and it came up with the side panel buttons. This morning it boots into classic mode and I can't seem to get it back to the regular mode with the side panel buttons! What could be wrong with video settings? When I first ran 11.04 live it came up with the side panel and didn't ask to install any video drivers.
View 3 Replies
View Related
May 13, 2011
I have Compiz and two panels - one at the bottom and on the side. Before running Compiz, both of them become visible on mouse hover. After Compiz starts, the one on the side would not show. I have no idea what is causing it. Could it be the cube?
View 1 Replies
View Related
Jul 5, 2010
I am using guayadeque and I need it to notify me about the title and the artist when a new song begins. Also it would be great if it could be controlled without restoring the window. I mean, every time I want to pause the song or skip to the next track, I should restore the minimized window and do whatever I want. Is there a way to control from the task bar or upper panel?
View 9 Replies
View Related
May 29, 2010
I have 2 drives formatted NTFS, which I'm mounting with /etc/fstab to ~/Movies/ and ~/Music/ and an EXT4 partition on my primary drive for games, mounted to ~/Roms/ and I would like for these drives to NOT show up in the side panel of nautilus.
I've been doing some looking around, and what I've found so far is that supposedly if you mount a partition/drive somewhere besides /media/ nautilus will ignore it. I'm finding this not to be the case, and it's driving me bonkers. here's my fstab:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code]...
View 9 Replies
View Related
Jun 14, 2011
How do I resize the icons and or favorites panel, on the left side of F15.
Also I noticed that fedora 15 is casing my laptop to run hotter than windows 7.
View 2 Replies
View Related
May 10, 2011
In both Slackware 12.2 (gtk 2.12.12) and Slackware 13.1 (gtk 2.18.9), the left-hand side panel of the GTK file chooser (File Open and Save) dialog box displays three sections. The first section contains two options: Search and Recently Used. The second section contains several options. The third section are personal bookmarks I have created and stored in $HOME/.gtk-bookmarks.
Modifying the bookmarks section is straightforward, but I am searching for ways to modify the first and second sections.
1. In both 12.2 and 13.1, the second section shows the following: $HOME directory, Desktop, File System. In 13.1, several mount points now appear. I think the criterion being used is the mount point being outside the main root tree. Several of these mount points are configured in fstab with the noauto option and are user mounted only as necessary. I do not want any of these volumes appearing in that section nor the Desktop option. Is there a way to exclude those volumes and options?
2. In that same second section are two mounted volumes from a second internal drive. Those two partitions are part of my bookmarks. In 12.2 those two partitions appeared in the bookmarks section. In 13.1 those two bookmarks are ignored and instead appear in the second section. I prefer those two points appear in my bookmarks section because I prefer my own labels rather than mount point names. Is there a way to do that?
3. Is there an option in $HOME/.config/gtk-2.0/filechooser.ini to control the width of the side panel?
View 1 Replies
View Related
Nov 16, 2010
I just upgraded to 10.04 (from 9.10) and I must say that I absolutely hate the new window layout with the buttons on the left. I found a post that helped me switch them back to the right however, when I open any system applications (like control panel) the window has no top panel at all. Really annoying.
View 1 Replies
View Related
Apr 28, 2011
After upgrading from 10.10 to 11.04, it appears gnome-panel won't start when I login in classic, classic with no compiz, or even failsafe/safe mode. What happens is the login will start, and I'll see an empty wallpaper with a cursor that switches between the hourglass circle spinner and a regular cursor.
If I hit alt+f2, the run dialog will appear, but immediately be killed (or something).
I am able to login with Unity as well as the recovery console. On the recovery console, when I try to launch the panel, I see this:
[blah blah blah]
b2b97000-b2ba8000 r-xp 00000000 08:05 2101405 /usr/lib/gio/modules/libgioremote-volume-monitor.sofish: Job 1, gnome-panel terminated by signal SIGABRT (Abort)
Since Unity doesn't work with focus-follows-mouse, but still tries to use focus-follows-mouse, I'm actually using IceWM to report this.
View 3 Replies
View Related
May 11, 2010
My gnome-panel is at the left side of my screen (I use the 'splendid' cairo-dock at the bottom of my screen). But when more than eight windows are open, the dock freezes. The 'Computer' button works, as well as the tray icons. My CPU rushes to 26% constantly. Solution is to kill gnome-panel and it reappears without complaining (if few than 8 windows open).
View 2 Replies
View Related
Dec 16, 2010
I've tried some more recent builds of Libre Office from Alien Bob and I'm still getting crashes when I try to dock the Navigator panel on the left side of the window for any of the office applications.
Details are in this post. More specifically, I'm running libreoffice-3.2.99.3-i486 from Eric. When I run 'oowriter' (Libreoffice Writer) from the command line, and then try to dock the navigator panel, I get this message after the crash:
Code:
Gtk-Message: (for origin information, set GTK_DEBUG): failed to
retrieve property `GtkOptionMenu::indicator-size' of type
`GtkRequisition' from rc file value "0" of type `glong'
Gtk-Message: (for origin information, set GTK_DEBUG): failed to
retrieve property `GtkOptionMenu::indicator-spacing' of type
`GtkBorder' from rc file value "0" of type `glong'
I don't know if it happens with the 64-bit version or not. I haven't tried it yet. I'm no stranger to submitting bug reports, but I haven't looked closely at Libreoffice's bug submitting procedures. I'll do that soon.
View 14 Replies
View Related
May 4, 2011
After upgrading to 11.04 from 10.10 they were there, but now I see no panel, no menu. Just desktop with icons with 1200 screen resolution. I can change keyboard with shortcut. No other shortcuts working.
View 1 Replies
View Related
May 11, 2011
After a dist-upgrade, the sshmenu-gnome applet that I had on the gnome panel is not showing any more.
Also if I try to re-add it to the panel it is not listed at all.
How can I restore it?
View 1 Replies
View Related
Sep 26, 2010
After successful (dual-boot) installation of Ubuntu 10.04 on my desktop and laptop, I wanted to do the same for my netbook. I downloaded the Ubuntu Netbook edition [URL], and doing the same as before I wanted to select the " install them side by side" option. But in the installation menu (which is not the same as on screenshots on the [URL] where they use the screenshots from desktop edition) there is no such option. Is that only possible with the desktop distribution?
View 6 Replies
View Related