Ubuntu Installation :: 10.04 Partitioning Bug - Install Without Physically Taking Out 2nd Hdd?
Jul 27, 2010
[Code]...
i want to install ubuntu on hdd 1 - 26G partition now when i start the installer in partitions it shows me serial ata RAID pdc_cbac (stripe) ... 498G. i cant chose from dropdown any of the 2 hdd. when i enter manual partitioning it shows me the partition as i listed them, in a raid volume dev mapper pdc_cbac...
now i disabled 1 hdd in bios (2 one); i checked that is disabled trough a dos boot loader... it is... now when i enter install partition, the disabled hdd its still there and the raid volume same, unchanged.
why is this happening? why cant i see my 2 hdd in partitioner drop down menu? how can i install without physically taking out 2-nd hdd? see the picture; the freespace at the mouse pinter is in fact a ntfs partition on hdd2, hdd that is disabled in bios [URL]
View 7 Replies
ADVERTISEMENT
Jan 13, 2011
my server is still running on 10.3 and I want to upgrade it to 11.3. I can't access it physically so it has to be an online upgrade. I have already learned that it is possible to upgrade from 11.x to 11.3 using Zypper from this nice german tutorial (Upgrade). But does it also work from 10.3? Should I upgrade all at once or every single version for itself?
View 3 Replies
View Related
Feb 11, 2011
So I am helping a friend (computer n00b) to install Debian Squeeze over the telephone, since his Vista had crashed, and after we set up the partitions like so:9 GB /1GB swap 150 GB /homeIt "hangs" for a while, i.e. nothing happens, and then it says that it "failed to partition disks". It did not give any error codes, and I did not see the message first hand, since I was doing it over the phone, but I was thinking that there is something wrong with the hard drive (causing Vista to crash perhaps?) so could this be circumvented by just using the first (or last) 10-15 GB of the disk?
View 7 Replies
View Related
Jun 11, 2011
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies
View Related
Oct 17, 2010
What is the best way to physically backup one's gmail and hotmail inbox on ubuntu?I have tried Evolution but it does not seem to store locally the mail which it accesses through gmail. Is there anyway to have it store locally a backup?
View 3 Replies
View Related
Feb 28, 2011
I have 2 hard drives and when I do an auto install.. Ubuntu decides to take both hard drives... how do I prevent this from happening without my intervention?
View 2 Replies
View Related
Jul 23, 2011
I know in Fedora one can take screenshots during actual installation of the OS with Shift+Printscreen keys on the keyboard and then can access them as root in the folder /root/anaconda-screenshots. So how do I do the same while installing Ubuntu?
View 2 Replies
View Related
May 4, 2010
When I updated from 9.10 to 10.04, the only thing I noticed immediately was that the Application menu and the things next to (Similar to window's Start button). That's still gone. I also am having problems with my hibernate. Whether I close my lid or physically click to hibernate, all that happens is my screen goes black but doesn't shut off all the way and the power button does nothing.
View 7 Replies
View Related
Dec 11, 2009
11.2 doesn't install Grub in the MBR by default, more precisely it doesn't highlight that choice during setup. But in fact it does occasionally (?) install Grub in the MBR, even when explicitely instructed not to do so. I'm starting to better understand people wondering why their Ubuntu vanished from bootmenu and swearing they did not install Grub in MBR. I'm quite sure I already experienced this issue with 11.1 as well as while installing my first 11.2. Now I decided to install 11.2 on another machine and pay double attention. I normally DON'T install openSUSE Grub in MBR. Somebody has to go in there and at the moment, I prefer to have Ubuntu's Grub2. I ran the installation twice. The first time, I added the root partition to the default location, which was in this case the extended partition's bootsector (sda4). The second time, I simply didn't touch anything. According to setup, the bootloder was supposed to get in the extended partition. I carefully copied down what the setup screen said. Here's :
BootingBoot Loader Type: GRUB
Status Location: /dev/sda4 (extended)
Change Location:Boot from MBR is disabled (enable)
Boot from "/" partition is disabled (enable)
I installed, rebooted and ended up with openSUSE Grub in MBR. Well, my partition tables are not the most usual ones. The first primary is always a 252MB FAT16. Second and third primaries are Unix. The extended partition is full of logical ones used for different Linux distros. At the end on the logical partitions, the Linux kernel adds up devices for the Unix slices found in the the other primaries after it read the FreeBSD disklabels (but not during setup). Maybe this is just my unconventional partitioning that openSUSE setup doesnt' like. However is that a reason for taking over my MBR ? Since I suspect I might not be the only one experiencing this problem (according to some threads), I thought I would report this behaviour.
BTW I just installed a Fedora 12 on the same kind of machine. It would have written its bootloader into MBR (by default) but respected my choice as I selected the root partition instead. I'm going to install openSUSE on that machine as well, deselect the extended partition and choose only the root partition as destination for Grub.
View 8 Replies
View Related
Jun 22, 2010
I am giving away a laptop with dual boot XP and Ubuntu. Partitions:
To erase all old files, I plan on burning an Ubuntu live CD and enter in the terminal:
And leave sda1 and sda4 untouched just in case the new owner wants to reinstall Windows in the future.
But how should I use the free 75GB ? Install Ubuntu on a 35GB extended partition and leave the remaining 40GB empty for XP, if wanted? Or should I use the entire 75GB for Ubuntu ?
View 3 Replies
View Related
Nov 6, 2010
I've used linux systems before, but the last time I actually set up a server was when fedora core 4 came out, which was, to say the least, quite a while ago. here's my core dilemma: atm, I have fedora 13 set up, and i'm looking to be able to vnc into it WITHOUT already having logged on as a user. I've tried various things and I'm having little to no luck. I uninstalled tigervnc and installed the original vnc package (With server) from realvnc.com. I've also installed xinetd and tried to get it to incorporate vncserver as a startup service, to no avail.
I have not been able to connect to the vncserver regardless of how I try. I AM able to connect to the base remote desktop functionality provided by fedora (Also vnc based). However, as soon as I disable that, I am not able to vnc into it at all. Long story short, here are the current goals:
1) be able to vnc into the computer without having logged into the system physically
2) have those logins be un / passworded. i.e., be able to login as whatever user
3) complete disable the normal graphical startup that fedora provides, since I don't think there's ever going to be a person physically at the computer and I'd like to maximize system resources
Also, if VNC is NOT the easiest way to do something like this, please let me know, I'm completely amenable to taking another route. In short, I'd like non-physical per-user graphical access to the server. I'd also like it to be more than one single vnc session, as I may have it open from either multiple locations or multiple users.
View 5 Replies
View Related
May 29, 2011
I'm new to the Linux OS, and this is also my first post on this form. My question is Can you physically adjust the position of the dashboard? I'm familiar with Mac OS X where you could "Physically" adjust to the top, left, right or originally at the bottom. Is it possible and if it is, can someone explain to me the process on going about that?
View 7 Replies
View Related
Apr 6, 2010
I currently have opensuse 11.2 - gnome installed on my laptop ( Toshiba Satellite m45-s265).I am trying to boot oof of my opensuse 11.2 DVD (32-bit) and its just not happening. For this particular computer I have to hit f10 upon startup to chose where I boot from. I chose cd-rom, it goes to bootsplash. I even went as far to adjust my BIOS settings to boot directly from CD, grub - bootsplash screen. When I initially installed 11.2 I never had this problem. I have never messed with grub, or BIOS on this cpu before.
View 9 Replies
View Related
Jul 5, 2010
I've seen a couple of Tutorials on how to make new partitions (on Windows XP) so that you can use that space to do some organizing (as in i.e "a place to save games", another one "for Audio/mp3 files"...etc), and basically the simplest way (that I found up to now) was:
Click on Start menu - right-click My Computer - Manage - Disk Management - Unallocated - right-click Unallocated - New Partition
Then you get a new partition. Is that new partition suitable to be Linux Ubuntu's partition? Is that what making a new partition for Linux Ubuntu is, or is it another process? (It's the first time in my life to to perform the process of Dual-booting, so I'm kinda stuck up to that point).
View 2 Replies
View Related
May 24, 2011
Our office moved yesterday. I shut down the computer cleanly and physically moved it to the new location. On startup, the wallpaper shows on both monitors, and the login screen. But, when I log in, I get failed to load session "gnome"
I am using Fedora Core 15. The only hardware that changed is I swapped out my cordless usb mouse for a corded one because I left the dongle at home. How I can I troubleshoot the problem and get my computer up and running again?
View 3 Replies
View Related
Aug 15, 2010
I had an aftermarket cpu cooler, and one of the mounts broke, causing poor contact with the cpu and the system hung. I've been running the system through paces after replacing the cooler and everything seems fine. I have two disks, one had muliple distros installed and the first one had one slackware installation. I decided a good test would be to reinstall an OS and since I wasn't booting into the old slackware install I decided to reformat the entire first disk which contained lilo and reinstall a newer version of slack. I had repeated boot failures, I've reinstalled, obtained a new ISO and reburned, I've installed Ubuntu and GRUB..Nothing I do will yield a successful boot off the first disk, although no live cd or install has given any errors and the installs on the second disk boot fine. I'm confused as to what is causing this.
Is it possible that the disk itself is damaged somehow even though checking for bad blocks, reformatting, repartitioning,etc show no errors, and a boot loader works fine from the disk, or is it more likely that something is maybe wrong with the motherboard?
View 2 Replies
View Related
Jan 30, 2010
partitioning of 2 HD (1 40GB SSD HD & 1 TB ordinary HD) in OpenSUSE 11.2. how to partioning both harddrives for best performance (no other OS).
View 7 Replies
View Related
Mar 18, 2010
I have just installed Ubuntu for the first time using a USB drive and everything went fine during installation. However now during the boot phase I see 10 or so lines of
[14.24024] ata5: COMRESET failed (error=-16)
The numbers prior to COMRESET change with each line but the rest remains the same. I am extremely new to Ubuntu or Linux for that matter as this boot process is also taking about 3-4 or even 5minutes as it slowly cycles through each error. Once 10 or so lines have popped up the computer finishes starting and I can log in fine and everything.
View 1 Replies
View Related
Mar 26, 2010
I have just made a clean install of Ubuntu 9.10 and after installing all updates, GDM is taking a long time (about one minute) to come up after a clean boot, resulting in a regular console prompt.
If I issue "sudo service gdm start" it does come up promptly.
What can I do? Where can I see startup logs to try and identify any problems?
View 5 Replies
View Related
Oct 31, 2010
I am attempting to install 10.10 from a usb stick after a disc installation failed, but it is taking forever. I am stuck on the screen which says 'Ubuntu 10.10' and has four little orange dots flashing as if it is loading. It has been like this for over 20 minutes now. Is this unusual or is it normal? Anyway, I am restarting my PC and trying again.
View 1 Replies
View Related
Apr 13, 2011
I am testing release 10.10 of Ubuntu desktop from a USB boot drive. It looks great so far, and I am thinking of installing it on the machine. However, I would like to know the disk space requirements. I know I could look them up, Also, while working with the interface I accessed all of the machines devices from the Linux OS and saw that I could partition an existing partition. However, that houses the Windows XP SP3 installation and I was wondering if altering partition size would wipe its contents.
I would be awsome if I could dynamically alter the partition to the size required by Ubuntu plus some slack for applications and the like so I could have both OSs on the same machine without having to reformat the drive for dual boot and re-install both OSs.
View 7 Replies
View Related
Jan 18, 2010
I'm having trouble installing Ubuntu on a brand new HP DL380 G6 server. Any time I go through the install, it freezes at 33% of formatting the first partition. I have tried 9.04 server disk, 9.10 server disk, and 9.10 desktop (all AMD64). I'm running out of ideas to troubleshoot. The server is listed as supported by Ubuntu 9.04. Here's more of the hardware:
2x quad-core Intel Xeon X5550 procs
16GB of RAM
5x 300GB SAS drives in RAID-5 array (1.2TB useable)
I just finished installing with the 9.10 alternate install disk (AMD64), and after reboot, it doesn't seem to find the boot partition and just sits there after attempting to boot from CD and hard disk.
View 2 Replies
View Related
Jun 9, 2010
I just purchased a new MSI WindTop AE2220 with a 320 GB hard drive running Windows 7. I want to dual boot until I know I have found all of the appropriate drivers. The confusing part is that the computer came with 4 partitions as displayed in the attached screenshot jpeg. How would you recommend I resize and partition my drive?
Current Partitions (in order):
Recovery Partition 14.65GB / 14.45 free
Active Recovery 100 mb / 100 mb free
OS-Install (c) 68.36GB / 42.06 GB free
Data (D) 214 GB / 213 free
Will install Lucid 10.04
View 2 Replies
View Related
Nov 11, 2010
I am installing UNR 10.04 but I get stuck at the partition because I want to dual boot with windows and I am afraid to go far without professional advice. What i want to do is install ubuntu on my D:/ drive and keep xp on my C drive. This is the current state of my hard drives at the moment (screenshot.png). I don't know what all the boxes to the right are for either. Also my D drive (which I want ubuntu on) has ext4 on it from a previous failed attempt to install linux mint. Because of this when I go to install ubuntu it shows xp on the C drive and linux mint on the D drive although the installation was botched and I cant really boot into linux mint. I have provided a screenshot of this too (screenshot-1.png). How to install UNR on my D drive properly. Iknow I need to add a swap partition how do I do that?
View 9 Replies
View Related
Nov 24, 2010
I'm trying to determine how to limit a specific user so that they are confined within their home. I'm also trying to figure out how to prevent a specific user from walking up to the computer and allowing them to log in, but still allow SSH. Basically I'm trying to provide an account with very limited access to the machine.
View 3 Replies
View Related
Sep 22, 2010
Just acquired a new laptop, Gateway NV, i5-430, 4GB, 500GB HD, Intel GMA, and, of course, Windows 7. I wish to install openSUSE (as I have on my other laptops and boxes, with Windows/XP and (sigh..) one Vista). No problems with partitoning any of them, but I have not partitioned a Windows 7 HD.I do wish to keep Windows 7, but SUSE has become my primary OS. So the question is: do I use Windows 7 utilities to "shrink" its main partition and then install 11.3 ? Alternatively, I can use the 11.3 install DVD to do the "shrink". I have already run the install up to, but NOT INCLUDING the actual partitioning.Windows has commandeered the first three (3) primary partitions, so SUSE goes to an extended partition. Windows looks something like:
1: 12GB (Recovery Partition)2: 102 MB (System Reserved)3. 453GB Windows 7 primary partitionThe 11.3 install proposes reducing #3 (above) to 163GB and allocating the remaining to SUSE (swap, /, and /home). I will probably tinker with the sizes (I really do not need a 280BG /home), and I want some space for an alternate distro.Any and all advice on the partitioning choice(s) will be appreciated. I did also attempt "GParted" from the Ubuntu liveCD, but the only way to boot that liveCD was to use "-xforcevesa" and I was not completely confident of that!(Note: already created the "factory recovery" DVDs and the apps/drivers DVD. I may dry run them before I do the actual partitioning. There is no data or software on it.)
View 9 Replies
View Related
Nov 8, 2011
I'm new to the Debian, but not to Linux. I've previously used Ubuntu for a few years, so I know something about how a successful installation should look like. I'm currently using Windows 7.
I downloaded the debian-6.0.3-amd64-gnome-netinst.iso from [URL] ...., and then made a USB pendrive using the Windows version of Unetbootin. The MD5 sum for the .iso-file was the correct one, b663727d7f5b572c329cea8e2ff5e29c.
I used the usual non-graphical setup, without any special options. The installation process went without hiccups until the "Starting up the partitioner" -screen freezes at "Scanning disks...". The bar stops at 50%. It never progresses any farther, even after an hour. It doesn't give any errors either. After I pressed Alt+F4, the last lines were:
Code: Select allpartman:Â Â No matching physical volumes found
partman:Â Â No volume groups found
partman:Â Â Reading all physical volumes. This may take a while...
partman-lvm:Â Â No volumegroups found
Exactly the same happens with firmware-6.0.3-amd64-netinst.iso too, or any of the live versions I tried. The result of graphical installation was also nothing. The USB pendrive created by LinuxLive USB Creator was nonoperative in exactly the same way.
The computer is brand new, without any previous OS installations. My desktop computer has the following parts:
CPU: AMD Phenom II X6 1055T, AM3, 2.8 GHz (HDT55TFBGRBOX)
Motherboard: Gigabyte GA-970A-UD3, AM3+, AMD 970, DDR3, ATX
Videocard: Gigabyte GT 430
Memory: Kingston 2x2 GB, DDR3 1066MHz, CL7 (KVR1066D3N7K2/4G)
Harddrive: Samsung Spinpoint F3 HD103SJ
Powersupply: OCZ 600W ModXstream, ATX 2.2, (OCZ600MXSP-EU)
View 14 Replies
View Related
Dec 27, 2010
I am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity. The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this. I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda /dev/sda1 the boot of 500MB formated as ext4 /dev/sda2 the swap of 6096MB formatted as swap /dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this. However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition. As a result I am unable to make use of the remaining space on the HDisk. I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
View 4 Replies
View Related
May 28, 2011
I switched to Fedora from Ubuntu about a month ago, and I've been very happy so far. But today I started the upgrade to Fedora 15, and something isn't right. I used the preupgrade method, and the package download took a respectable 30-40 minutes, then I was prompted to reboot my machine. I did so, about 4 hours ago. It took about 2 hours to get to the point where it says it's installing the packages, and 2 hours to get to where it is as I write this, at 116 completed packages out of 1634.
I'm pretty sure this isn't normal for ANY distribution. The machine itself is about 6 months old, so I'm pretty sure it's not a hardware issue. I'm considering interrupting the upgrade and doing a clean install, but I was wondering, is there anything I can do before resorting to the clean install option?
View 7 Replies
View Related
Feb 7, 2010
Whenever I try to install Ubuntu 9.10 x64 from a Live CD the installer freezes or quits when trying to partition the drive. I tried booting into the Live environment and using GParted but that would only let me make a ReiserFS partition without crashing. With the Reiser partition I tried the installation program again but this time the installer froze when trying to install the files.
My system specs are:
AMD Athlon 64 X2 6000+ (3.0GHz)
4GB RAM
500GB SATA2 HDD
ATI Radeon HD 4770
Currently it also has a second SATA2 HDD with Windows 7 installed but I disconnect this during installations
View 4 Replies
View Related
