Ubuntu Installation :: 10.10 Fails When Trying To Install Grub
Apr 20, 2011
I'm new to Linux, and I'm trying to install Ubuntu on a PC that was home built a few years ago. It had XP on it and it ran fine, but i wanted to learn Linux, so I decided to install Ubuntu. I've tried a few different versions of Ubuntu, 10.04 and 10.10 to name a couple. 10.04 gets so far and the boxes all close and it sits there. 10.10 fails when trying to install Grub. I did get Xubuntu 9.04 to install but it fails when i do any updates/upgrades/software installation After it fails, it will no longer boot. Just a thought I had could be incompatibility with my mother board? I have a Mercury P4VM800M7 motherboard in it now. Hard Drive is a WD Sata drive that i just purchased brand new.
View 9 Replies
ADVERTISEMENT
Feb 12, 2010
No matter which ubuntu version at 95% through the install it will complain that grub failed to install.
I'm installing this on an HP XW6600 with hardware raid striped.
I can use the supergrub rescue CD to boot to ubutu after, but whatever I do doesn't seem to get grub installed.
Any ideas on how to proceed? I'm guessing I need to install grub from scratch.
View 3 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
May 2, 2010
I'm running Win7 and want to install 10.04 as dual boot but the installtion keeps failing. When I boot from the CD the install fails with the following error "The installation encountered an unrecoverable error, a desktop session will now be run". The desktop session loads fine and I am able to use 10.04 via the disk. When I install from the live cd everything looks fine and I get the "Installation Complete" message. On rebooting I get a few errors before the PC reboots (something like [1723.19270]END_REQUEST:I/O Error, DEVR0 sector 50756. The machine then reboots straight into Win 7.
View 9 Replies
View Related
Feb 26, 2010
I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.
The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.
It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?
View 5 Replies
View Related
Jun 18, 2011
I'm trying to install FC15 x64, the install goes smooth and reports no errors, I looked around in /tmp/anaconda.log but couldn't see any relevant errors either, basically after rebooting and trying to boot my new install, I get:
error: file not found
Entering recue mode...
grub rescue> _
I've reinstalled 3 times now, first I was using USB, but now have tried with CD too. All I want is for GRUB to be installed on /dev/sda2 which is where my install is, and which is also the default location where the installer supposedly installs it to. I've also tried unplugging my other hard disks, and installing with just the first drive.
View 14 Replies
View Related
May 24, 2011
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
View 1 Replies
View Related
Jan 8, 2010
This morning I updated my system as prompted by the update manager. Upon reboot, I got "grub:sh>". After doing some googling and a bit of trial and error, I managed to figure out that I can manually boot successfully by executing the following commands.
Code:
grub:sh> linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
grub:sh> initrd /boot/initrd.img-2.6.31-14-generic
[code]....
View 7 Replies
View Related
May 17, 2010
I installed Ubuntu 10.04 LTS to dual boot with Win Xp and everything went fine with the installation untill I went to boot back into Windows. My keyboard fails to respond in the boot loader so I am stuck with the default setting of booting back into Linux. To be clear, the keyboard works when the BIOS loads, I can hit DEL and go to the BIOS menu, etc, it's only when I hit the boot loader. The keyboard also works fine in Linux and Windows.
View 2 Replies
View Related
Aug 24, 2010
I have installed Ubuntu 10.04 LTS-the Lucid Lynx on top of a Windows XP installation. The Windows partition started before I did this. Now, all I get is a flashing cursor when I tell GRUB to start the Windows XP partition.
I have tried reinstalling Ubuntu with no effect. I have tried repairing Windows using a Windows installation disk.
However, I can reach the files in the Windows partition just fine from Ubuntu.
View 9 Replies
View Related
Dec 7, 2010
I currently have a Dell Dimension 4100 from 2000 upgraded with an Nvidia Geforce 6200 video card and 160 gig hard drive, I just upgraded to Ubuntu 10.10 from 10.04 and once I restart, I hear a beep come out from my computer speaker, and then displays the following text:
Code:
GNU GRUB version 1.98+20100804-5ubuntu3 Minimal BASH-like line editing is supported. For the first word,TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub> I'm not used to typing in command line, but if anybody has a way around it for me, I'll be pleased. It's Ubuntu or Windows goes back on... or bust.
View 9 Replies
View Related
Jan 15, 2011
I previously had a single 160gb drive with two partitions, dual booted for Ubuntu and XP. I then installed a new SSD drive and put Windows 7 on it and of course I lost grub on the MBR. I have gone through this before so I went ahead and booted the livd CD, installed grub then ran
root (hd0,1)
setup (hd0)
but then got these errors;
Error 22: No such partition
grub> setup (hd0)
setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
[Code]....
View 9 Replies
View Related
May 21, 2010
Third attempt to install 11.2 live on my netbook with three different USB sticks.
Every time it fails message reads...
Error occured while installing grub.
The only exception to a normal install is that sda1 is formatted with ext2 (to avoid journaling). I have had 11.1 running on that drive for several months without problems so there is no reason to believe it's a hardware problem.
Can I abort at this point and perhaps fix it from a live boot?
View 1 Replies
View Related
Mar 27, 2010
I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
View 4 Replies
View Related
Jul 30, 2011
Installing to encrypted LVM on hardware RAID array.
When it asks where to install GRUB, it defaults to /dev/mapper
I have tried /dev/mapper, /dev/boot, /dev/sda1, /boot.
raid array with:
I am not sure what to put there.
View 9 Replies
View Related
Nov 21, 2010
I am a complete noob at this and I need a hand. I was about to throw my computer out of the window when I decided to throw the windows out of the computer so to speak. So, I downloaded Ubuntu 10.10 and tried to install. I had a grub rescue after the installation (file system unknown), which I have seen discussed here. Being the noob that I am I decided to try 10.04 because it said it had full support. With this install I get a similar error during installation: grub cannot be installed in boot sector.
So, basically there is an issue with grub and the boot sector. I checked in my BIOS options to see if there was an option that prevented the writing of a boot sector or something, but I have not been able something like that. So, I am wondering if it is possible that Ubuntu does not really erase/format the selected disks or something, leaving any difficulty there.
Does anybody know? Or better yet: what exactly do I need to do a manual grub install?
View 9 Replies
View Related
May 10, 2013
I have downloaded the Wheezy DVD 1 and started the istallation process. The installation time is strangely very short in respect to the Squeeze release, anyway
The GRUB installation step fails. I terminated the installation without a bootloader and rebooted from DVD with the rescue boot option.
Now I asked for a console to try to manually install the bootloader but the following command:
# grub-install /dev/sda1
[where sda1 is my root partition]
gets the following message:
/bin/sh: grub-install: not found
What can I do?
View 14 Replies
View Related
Jun 4, 2011
I recently purchased a new Lenovo Thinkpad T420i and am having problems installing the latest version of Squeeze from CD. After receiving the laptop, I started it up, configured Windows 7, and confirmed everything is working correctly. Next I went through the Debian installer, which completed successfully. I'll be dual-booting Windows 7 and Debian, so at the partitioning stage I resized my NTFS partition, added a shared VFAT partition, then used the "Guided" install to create my root and swap partitions. My partition layout is code...
I assumed something was wrong with grub, so I booted the CD into rescue mode and chose to reinstall grub onto the Master Boot Record. But nothing changed. Just to experiment, I went into fdisk, deleted all my new partitions (leaving just the Windows ones), and tried rebooting, but the same error happened. I then went through the Debian installer again, being careful to set everything up correctly, but still, the device won't boot.
I'm not even getting to the grub boot screen, so something is wrong even before the point. Reinstalling grub to the Master Boot Record (grub-install /dev/sda) isn't changing anything. How can I troubleshoot this?
View 8 Replies
View Related
Feb 8, 2010
I've tried to be clever but as usual I didn't think before acting and missed a small detail.
I have recently installed karmic (dual booting with Vista) on my dell xps laptop. The install went fine, I'm very happy with my new OS.
I bought a new Seagate 500GB portable external HDD. I got a bit over-excited and installed karmic on the external drive. This worked fine and I got a lovely (but slow to appear) Grub2 menu showing my vista and both ubuntu options.
My problem is that now, when I unplug the external drive, Grub fails and I get a grub rescue> prompt. So I need the external drive to be plugged in if I want to boot.
It seems I have done something to the grub configuration. I have read around the subject but I am not confident about how best to proceed.
I understand there is an 'advanced' option in the installer which will allow me to choose where to install grub. Presumably I want it on the internal drive so that I can boot without the external one plugged in.
Am I right in thinking I can just pop in my install disk and redo the installation?
If I indicate I want to install Grub on the internal drive, which partition should I aim for?
Will I get a grub option for booting to the external drive?
Will I be able to plug the external drive into a different machine and boot from it?
I haven't done anything with the fresh install on the external drive so I don't mind losing that.
View 9 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Nov 7, 2010
I have a major problem installing opensuse 11.3 on my computer( hp pavilion dv6).I downloaded openSUSE-11.3-GNOME-LiveCD-x86_64 from software.opensuse.org: Download openSUSE 11.3 and made a live usb.I'm a newbie at using linux infact i never used another operating system beside windows.Now i have installed windows 7 (on c disk 100gb).My first problem when i am trying to install opensuse is that he dosn't automatic choose to make my partitions so i have to do it manualy.I was searching how to make it the best way so i desited to make 4 partitons one for ' /boot' one for ' / 'one for '/home' and a swap partition/In windows7 i made 4 new partitons
3:10 gb for /boot
4:10 gb for/
5:70 gb for /user
6:10 gb for /swap
My first question is :Is this right to make 4 paritions in windows (opensuse can't format or resize my partitions it just can edit it ) so it's my only way to make partitions( If this is wrong how can i make partitions then)
My second question is how to change the bootloader configurtation because everytime when ii try to install opensuse it stops at about 96% and it says to reconfigure the bootloader options.
If i skip this i get the folowing message
=== System Checking ===
Checking for /usr/bin/chroot binary... Passed
Checking for chroot directory /mnt... Passed
Checking for chroot directory content (bin
boot
Checking for binary /mnt/bin/ls... Passed
Trying to chroot... Failed
This is worth reporting a bug at url.
View 9 Replies
View Related
Jan 7, 2011
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies
View Related
Jun 28, 2009
I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
View 1 Replies
View Related
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
Aug 9, 2010
I'd iso from Ubuntu website last week; burned to CD at 16x and verified. Tried installing as only OS onto used 17GB HDD in old 933MHz HP box w/ 2x256MB RAM; failed. Other tries (all failed at same 49% place): changed HDD to used 10GB; burned CD at 8x (slowest my burner will run) and verified data after burning; started CD in HP's burner drive instead of CD ROM drive; "downgraded" to 17" Dell CRT monitor (from 15" Sony flat panel). Both burned CDs will run in live mode.
View 1 Replies
View Related
Aug 24, 2010
I am trying to install 10.04 on a Dell XPS Gen 4 machine with Raid 0. I have 2 WD 74GB drives with a 128k stripe.
The install appears to be working great - then suddenly hangs trying to install Grub with the following error:
Unable to install Grub in /dev/sda. Executing 'grub-install /dev/sda' failed.
This is a fatal error.
I have tried choosing different partitions without any luck at all.
View 8 Replies
View Related
Apr 17, 2011
Ubuntu Desktop 10.10 installer crashes using the "Install Ubuntu" option to install from CD onto IBM Aptiva 2139-E5D PC. Crash message preceded by several occurrences of error message "Warning! Error fsyncing/closing /dev/sda: Input/output error". (PC has IDE drive but Ubuntu uses SDSI device label?)The "Try Ubuntu" option boots and operates without incident from the same CD on the same PC .
During the startup for both options, the same error message occurs: "[126.012xxxxx] piix4_smbas 0000:00:07.3: IBM system detected: this module may corrupt your serial eeprom: Refusing to load module! ISO 9660 Extensions: RIP_1991A0xa0".I'm unable to access the /var/log/syslog and /var/log/partman files that were requested in the Installer Crash dialog box.
View 7 Replies
View Related
May 20, 2010
I have Vista on my Samsung R60 + and have installed Ubuntu. On start up I get the dual boot option, select Ubuntu which then goes to completeing install etc, get some HD activity then nothing.
View 1 Replies
View Related
Jan 6, 2011
I'm trying to install 10.10 x32 server, on a machine with the HW Raid-5. And install fails on Bootloader setup :/, so I continue with installation, and everything finishes fine.When machine boots, it obviously (since grub failed to install) says insert bootable media, and press any key. So I boot from the CD, goto rescue mode, installer environment:
>>mount /dev/mapper/server-root /mnt
>>grub-installer --root_directory=/mnt /dev/mapper/server-root
Wrong number of args: mapdevfs <path>
I tried to install OS multiple times, from full automatic HDD partition setup, to manual, and it always fails to install grub . I can mount, read/write /dev/mapper/server-root partition, and the contents of the partition looks like a valid OS.
View 3 Replies
View Related
Jan 9, 2011
I'm trying to install ubuntu from a disc that I downloaded and burned. I'm currently using windows vista, which recently got a virus and had to be reinstalled, so I decided to try ubuntu instead. My problem is that when I reboot my computer with the disc in the drive, it appears to be starting to boot, but instead of a menu, a purple screen with a picture at the bottom appears. I'm not very good with computers, but a couple of years ago I tried booting an older version of ubuntu to test it, and that worked just fine.Edit: I'm trying to install ubuntu 10.10, and I'm currently downloading ubuntu again to burn onto another CD, in case the CD is the problem.
View 9 Replies
View Related
