Ubuntu Installation :: 10.04 Live CD 'Installation Failed'?
May 2, 2010
I decided to do a clean install of 10.04, the machine was previously running 10.04 from being upgraded day by day from a beta install.I used checked good 10.04 live CD as live and gparted to delete a partition on sdb. My intention was to install into the largest free space on the drive, (which I ultimately did). There are two HDs on the machine, Windows on a partiton and a couple of installs of ubuntu on the first drive, the second drive had unpartitioned space and ext4 data partition and a swap.
I then restarted and after a space bar press, used the menu second option to install Ubuntu.I subsequently saw an error window:Installation failedThe installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.Just in case, I did the whole thing a second time, but same result.I continued, using the subsequent desktop session. I chose the desktop Icon to install Ubuntu, which all then seemed to go okI am an experienced user, so I have confidence in Ubuntu, however, I believe new users would be suffering a loss of confidence at such situations.
View 7 Replies
ADVERTISEMENT
Mar 23, 2010
Yesterday I installed Fedora 12 using a Fedora live image CD, which I downloaded from the Fedora site. The machine is Dell Precision 670, 4GB of RAM, 70GB HD. I went through all the steps outlined on the Fedora site, and rebooted the machine. After reboot, the fedora icon comes up, and after about 10 minutes I see the following message on black screen:
mount: you must specify the filesystem type
dracut: FATAL: Failed to mount block device of live image
dracut: Refusing to continue
No Root device found
Boot has failed, sleeping forever.
View 6 Replies
View Related
Jun 28, 2010
I'm getting the following error when booting from the 10.04 live CD: Installation Failed. The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.
I checked the CD for defects, and even tried re-downloading/burning to a new disc, but got the same problem. I tried booting in to the LIVE session then installing from the desktop but I still got the same error. I have had 9.10 running on here fine, and after running a Kubuntu 9.10 disc I had to hand to check it would work, that installed fine (hence the auto-partitions you will see in my info dump below). Here is some information about my system, let me know if I've missed anything. I've also included a copy of the syslog below.
[Code]....
View 6 Replies
View Related
Sep 8, 2010
I've done a good few ubuntu installations for friends and colleagues and now my Dad wants in on the action. His PC is more than capable of running ubuntu 32 bit BUT I've hit a brick wall I've never come across before. I've burnt a CD image of the 10.04 iso from [URL] on my ubuntu box and for some reason, his PC just won't boot from it. If I select the option to manually select the boot source, all I see is the hardware monitor telling me things like CPU temperature. As for the Live USB - nothing whatsoever. Is it possible that I've managed to corrupt the iso file somehow?
View 3 Replies
View Related
Apr 28, 2011
Live CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
View 5 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
Oct 13, 2010
I downloaded Ubuntu 10.10 2 days ago and tried to instal it on my:HP EliteBook 8540wIntel Core i7 740QMIntel QM57 Express8GB RAMnVidia Quadro FX 1800 with CUDA (1GB)Of course I went 64bit, but the Live CD wouldn't start. Instead I get some weird artifacts on my screen.I can see bits of my Windows-background with taskbar and some of the windows I was using earlier before restarting, like the download manager. If cold boot my PC I see black and white boxes with coloured dots on them.
Thus I thought of an issue with the 64bit architecture and possibly the grafics card too (the artifacts are clearly remnants of data from the VRAM)I tried the same with the 32bit version and got the same issue (indicating NO issue with 64bit, at least not directly).In the end, I installed Ubuntu from the alternate 64bit CD and now am stuck with a non-working installation of Ubuntu.I get some kind of error concerning pcieport (probably PCI Express).When I install Ubuntu on Virtualbox through Windows 7 however, I don't get any kind of issue (I'd still like to be able to run Ubuntu natively)Any idea on how to fix the problem?PS: I'm not very experienced with Linux, so if you ask me to go into console mode, please be detailed on what command I should input.
View 2 Replies
View Related
Dec 2, 2010
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
View 2 Replies
View Related
Aug 4, 2010
I am trying to install 10.04 32bit onto a new 1.5TB harddrive. I had previously installed 10.04 64bit on an old drive in the same nmachine. I partitioned and formatted the new drive using the old system. I have a couple of windows partitions and restored Win2K images to them, 4 formated Ext3 partions for whever flavour of Linux appeals to me a swap and two huge NTFS Data (home) and work areas. I installed Grub on the new drive, it also has its own partition for boot config files. The old drive has now gone.
Grub2 boots OK and gives me option for all the OS's even the one that are gone, thats OK I can fix that later with grub-update. Win2K boots fine and I see my NTFS partitions.
Now I boot from the Live i386 CD and chosse to install Ubuntu. The only thing that not allowed to default is where to install. Specify partition manually, Choose a spare 20GB Ext3 and the swap is already there too. I let it reformat to Ext3 and mount as /. (In Advanced I let the install boot loader default to ticked on /dev/sda )
The install goes OK until I hit the pop-up "Installation Failed". The installed encountered an unrecoverable error. A desktop session will be run etc etc..
I have tried this at least 10 times no. I downloaded and cut a new CD even though the old one worked fine on another box. Tried unticking the boot loader. Disable the floppy, removed the floppy.
I am relatively new to Ubuntu. Where do I look for the cause of the problem? I'll cut and paste the install log files in a moment.
View 5 Replies
View Related
Mar 23, 2010
I have 9.10 installed and working like a charm, due to the problems I had last time, I decided to leave an empty space to try and test upcoming editions, but I can't install it!
I get two error messages and can't get past the point of partition assignment.
Here's the screenshots. I'm trying to install on the free space.
View 3 Replies
View Related
Mar 9, 2011
i get this error whenever i update or install/uninstall a package Package operation failed
The installation or removal of a software package failed.
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
[Code]...
View 2 Replies
View Related
May 24, 2011
I downloaded the 32bit iso from the ubuntu website and wrote it to disc using imgburn.
The problem is that when i boot from cd i get the loading splashscreen with the 4 dots flashing then it loads the ubuntu background and my mouse curser spins around for awhile then tells me the installer encountered and unrecoverable error and a desktop session will now be run so you may investigate and problem or try installing again. When it reboots it asks for a username and password. i use ubuntu and blank and then it does a loop and the logon menu comes up again.
the computer is an old acer aspire running xp home sp2
i tried it on another computer a dell laptop running vista and it worked fine and can up with the menu and i clicked try now and it booted into the gui.
View 6 Replies
View Related
Aug 3, 2010
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
View 6 Replies
View Related
Dec 2, 2010
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
View 4 Replies
View Related
Aug 4, 2010
I tried to install JRE 6 After adding partner repository I wanted the updates by this command sudo apt-get updateI got the following errorE: Malformed line 54 in source list etc/apt/source.list (dist parse)what does it mean and how to rectify.
View 1 Replies
View Related
Oct 12, 2010
I have tried and failed to install the lastest netbook version 10.10 on my Acer aspire one 110 netbook, this is the one with a 8gb ssh.
It booted fine on a usb drive and I was able to test drive the distro. The installation went all the way through without any problems but when it came to rebooting the netbook just showed a blank screen with a dash in the top left of the screen. There is no sign of the computer looking for the hard drive it just sits there!
If I reboot using the usb key I could see that all the files have been installed on the 8gb drive. I have reloaded 10.04 which works just great and during that installation the installer could see that 10.10 was installed.
Has anybody else had this problem? I was wondering is there is a problem with GRUB , however it would be nice to install the new version it's so frustrating to have failed.
View 3 Replies
View Related
Nov 11, 2010
I was trying to install a RAR extractor called Peazip (http://peazip.sourceforge.net/) I selected the 64-bit package (I run Lucid) and went for it. Everything extracted ok, and the package met all requirements. However, during the installation process, it hung. No movement. I closed out of the installation, and restarted, to attempt a second try.
Now, when I try to install anything:
Code:
(Only been running this OS for, oh, what, a week? And I already hosed it up! )
View 3 Replies
View Related
Jan 21, 2011
I'm install Enterprise Cloud 10.04 and for some odd reason when it gets to the install process "Select and install software" It fails.
I ran the process over and over and it still fails.
View 1 Replies
View Related
Jul 22, 2010
I'd like to install Ubuntu 10.04 32 bit, over my Ubuntu 10.04 Amd64.
When I insert the live CD (that is working, I've used it yesterday to
install on my desktop at work),
the Boot from CD is skipped (but is configured properly
in the BIOS, in fact when I installed the 64bit version I had no trouble
at all) and the existing OS is loaded instead.
It seems to me to read some error related with the device (but
is fast and can't be sure what the message says).
After Ubuntu has been loaded, I can read and explore the CD.
I'd like to know how to solve this issue, any advice?
I'd want to boot from cd again, but if you know how to start
live installation when Ubuntu is already running, may you please let me know?
View 7 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
May 24, 2011
Downloaded few minutes ago Fedora 15 live x64 and used Fedora live usb creator to make my usb drive bootable.Once configured correctly my bios Syslinux starts but it hangs on the startup message
View 5 Replies
View Related
Aug 1, 2010
explain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.
View 4 Replies
View Related
Sep 7, 2010
I have a dual boot PC, tried to upgrade to Lucid Lynx and the upgrade failed. Can't boot into it at all. Windows XP still works fine. I have the live CD for a re-install now. I read this post but don't understand the difference between the instructions for the partitions. Have posted my screen shots below.First screen shows that I have 10.04 and offers me the option to partition further.Screenshot 1 I choose manual partition and then it gives me the right sized partitions. . Then in screenshot 2 I edit and choose the mount point as /, is that right? (screen shot 3). Do I then change that option again to choose /home? because otherwise it takes me straight to screenshot 4, the user name set up.There's No Custom User Title Here
View 5 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Mar 16, 2009
I have an installation problem that I cannot resolve. The problem arises during the installation process, using the Fedora-10-i386-netinst.iso image, burnt onto CD.Immediately after setting up the network card, I am given the error "Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again". Since the installation process is text-based, I do not have the option to edit the repository list, and consequently, have to abort.This is the spec of my machine:
Pentium 166 (yes, it's very old, but it should work, no?)
132MB RAM (just about enough ram for minimilistic server)
80GB hard disk
[code]....
View 1 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Jan 12, 2010
I am using 6.06 live CD and I'm trying to load ubuntu on a G4/1Ghz laptop with 1GB of memory and a 50~60GB harddrive. I want to use it to write simple programs (c++ and fortran, but I can't get it to compile -- it doesn't have g++!) I cannot connect it to the internet, so how can I get it to install with g++? I thought there'd be a more involved long list of things to include/exclude, but there isn't. I ordered a CD/DVD version of 9.10, but that won't be here for an estimated 4~6 weeks. How can I get this to work. I've tried using my dual core mac running 10.4.11 to download the image and burn it to a DVD, but it won't do it... but that's a second issue. What I need is c++ in the G4 running ubuntu.
View 1 Replies
View Related
Jun 24, 2010
looking for the live CD ISO for 8.04. Looked all over the ubuntu down loads but no banana. Where can i find it? TIA
View 1 Replies
View Related
Jul 22, 2010
Yesterday I wanted to check out the new Ubuntu version (10.04) but unfortunately this failed. I downloaded as usual the Ubuntu live CD image and burnt it on a RW-CD I had. I used Nero's software under Win XP Pro... The creation of the CD was fine... It booted from the CD, I choose the language, the try Ubuntu without installing. After this point nothing went as it should... I got a lot of error messages, the screen was in text mode it finaly stoped with a text mode ubuntu command line.The errors were mostly I/O errors I tried to use the check disk option but also failed same kind of errors and at the end somthing like trying to connect to plymouth connection refused. My computer configuration is the following:
AMD Athlon 2800+ (sk. 754)
2.5GB RAM (1x 512MB, 2x1GB, all different modules)
Epox 8KDA3i nForce3 250 motherboard
ATI Radeon 9550, 256 MB video card
A realtek based NIC, PCI slot
[Code]...
View 7 Replies
View Related
Oct 11, 2010
I downloaded the cd and burned it and checked it and all that
I start the computer and the press f6 when that picture of the guy and the keyboard comes up and then I choose try ubuntu without installing
Then I can se a white small line blinking in the upper left corner then it goes black, my monitor switches off and then nothing happens
I had the same problem trying to run 10.04 and 9.10
And I have had many different monitor so it is of course not that
I dont know why it wont work just that it dose not work, so will Ubuntu never work on this specific computer or will the next version work?
System Information
------------------
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
System Manufacturer: FUJITSU
System Model: ESPRIMO P1500
[Code].....
View 7 Replies
View Related
