I'm install Enterprise Cloud 10.04 and for some odd reason when it gets to the install process "Select and install software" It fails.
I ran the process over and over and it still fails.
what kind of network between cloud controller and nodes, is required for a proper cloud installation? I mean, Does all machines needs to be in same network, in same lan, or may be in MAN or WAN ? how much should be network throughput? 1Mbit/sec , 10Mbit per sec, or 1Gbit/sec? I ask because I need to know the possibility of running nodes on different locations.
View 1 Replies View RelatedI have read just about every page about the UEC project, and I now know everything about it, except... WHAT IT DOES! I can't seem to find a coherent example of what it does. To the best of my understanding, it runs a virtual machine across multiple servers. Allowing the VM to use the RAM, CPU, and HDD resourced on all servers involved.
View 6 Replies View RelatedI downloaded the latest 10.4 server CD with the intention of running a small Ubuntu Enterprise Cloud. I am following the directions here: [URL] Ive got 2 laptops that are capable of the tasks assigned to them. Both have dual core Intel chips that are VT enabled, 4GB of RAM, 250GB hard drives. Ill use one ( "server" ) as the front end server running cc, clc, walrus and sc.The other one ( "node1" ) will be the only node controller on my little network. Ive also got another laptop as a client, running euca commands to make instances and what not.These three laptops are connected to a switch. server is 192.168.1.100, node1 is going to be 192.168.1.110, the client laptop is 192.168.1.120.
the server seems to install fine, I select Install Ubuntu Enterprise Cloud, use it as the Cluster, give the cluster a name and 10 IPs to assign, 192.168.1.150-192.168.1.160 After the server is done installing and reboots, I boot the node machine off the CD and again select Ubuntu Enterprise Cloud. It's at this point the install craps out, because it does not recognize a cloud computer on the network.
Indeed, as I go to the server I run
Code:
ps -aux | grep euca
and see nothing running. So I start the eucalyptus service, and run
Code:
sudo euca_conf --list-clusters
and nothing shows up. Ive done some googling, ran some more euca_conf commands, registering the cluster, enabling walrus, cloud and sc. I can access the web gui on the client laptop, then restart the node install on the node laptop. This time it does see the server as a cluster controller, but when it tries to fetch the preseed file, it seems to not know the cluster's IP, as the red box that complains about the lack of a preseed file lists the URL as [URL] ( or whatever the file is called, I dont have the error in front of me. )
So best if you take a quick look at this image, which describes a network topology: [URL]
I am behind a firewall in the university dorm and many ports are banned. Well pretty much everything besides 80, 8080, 110, 21, 22 and the most basic ones. So I'd like to get around that.
I have a home server that is connected and reachable on the internet. So if you type in 90.90.90.90:80 into a browser it's reachable.
The task would be to set up a port forwarding or how you call it in a way that if I access my home server from the dorm or anywhere, it would act as a forwarder and forward that packet or connection to the 80.80.80.80 server on a specific port, say 2083 so that I can even access my hosting Co's admin user interface.
To sum it up: I'd like to access the 80.80.80.80 server from the dorm on port 2083 which is blocked by a firewall, but I have a home server that is reachable on non blocked ports. The home server has no ports blocked.
I installed Real VNC enterprise software in Ubunto 9.1 by mistake, but there is no control panel like Windows to uninstall it, how to remove it and I want to install real vnc free version.
View 3 Replies View RelatedMe suman, new in the Linux world. I made a Box with AMD Phenom II X4 955 Processor, ASUS M4A78LT-M M/B (AMD 760G Chipset) and DDR3 RAM.While installing RedHat Enterprise Linux 5, after selecting the Installation media as CD-ROM I am getting the error msg "No Driver Found. Unable to find out any Drivers of the type needed for this installation."Though I had installed Fedora 8 in this box successfully.
View 1 Replies View RelatedI successfully install vnc server and client in my machine after installation in GUI mode i clicked on service and enable vnc server when i click on start. It says that "This service is being refreshed right now" Then after i use terminal and typed "#service vncserver start"
its display error message "Starting VNC server: no displays configured [FAILED]"
I have a Dell Precision 330 with (the latest) A09 BIOS and 1 TB SATA hard drive. There is a SATA-IDE converter between the SATA HD and the ATA133 cable. The OS was Window XP Professional SP3.
When adding RH Enterprise Linux 6 onto the computer, I created two additional partitions, one 400 GB for Linux's storage and a 10 GB swap space. I chose Window XP as the default OS.
After the installation, when the system started up, I can hit a key to have two optional OS: Window XP and Linux. If I chose Linux, the system would boot up. If I chose Window XP, the boot failed with a message that windowssystem32configsystem was missing or corrupted. I read some articles that the problem can be fixed in window's recovery console with fixboot. After entering the fixboot command and restarting the computer, Window XP still failed to boot with an error message that another file was missing.
I thought I might have made some mistakes in the installation procedure and it would be cleaner to reinstall both OS. So I tried to install Window XP Professional again. Unfortunately, after booting from Window XP CD and formating the MBR and copying the window XP files, the computer can not restart with the installed XP. Instead, the computer boot from Window XP's CD repeatedly. If I remove Window XP's CD, the computer simply can not boot at all.
I began to wonder whether RH's Enterprise Linux made some change on the MBR of the HD that Window XP can not format.
I am trying to install Redhat linux 4.0 Enterprise edition in my system. The system starts booting from CD-ROM and starts installation. It prompts for language selection(By default English) and then key board type ( By default US type). After this it is prompting to select the drivers with the following options.
" SELECT DRIVERS", "CHOOSE DRIVERS FROM LOCATION", "BACK". Why it is prompting for drivers?. what type of drivers it is looking for? what is the solution? My system mother board type is Intel 80865.
How to configure RAID 1 (hardware RAID 1 or Software RAID1 ) after installation of operating system : RED HAT ENTERPRISE LINUX 5.3 SERVER
View 9 Replies View RelatedI have installed Redhat Enterprise Linux Server 5 on my laptop. I want to install Oracle 10g database on RHEL5 server. I want to know whether any additional rpm's need to install before installing the Oracle 10g.
View 1 Replies View RelatedI i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
I am trying to install 10.04 32bit onto a new 1.5TB harddrive. I had previously installed 10.04 64bit on an old drive in the same nmachine. I partitioned and formatted the new drive using the old system. I have a couple of windows partitions and restored Win2K images to them, 4 formated Ext3 partions for whever flavour of Linux appeals to me a swap and two huge NTFS Data (home) and work areas. I installed Grub on the new drive, it also has its own partition for boot config files. The old drive has now gone.
Grub2 boots OK and gives me option for all the OS's even the one that are gone, thats OK I can fix that later with grub-update. Win2K boots fine and I see my NTFS partitions.
Now I boot from the Live i386 CD and chosse to install Ubuntu. The only thing that not allowed to default is where to install. Specify partition manually, Choose a spare 20GB Ext3 and the swap is already there too. I let it reformat to Ext3 and mount as /. (In Advanced I let the install boot loader default to ticked on /dev/sda )
The install goes OK until I hit the pop-up "Installation Failed". The installed encountered an unrecoverable error. A desktop session will be run etc etc..
I have tried this at least 10 times no. I downloaded and cut a new CD even though the old one worked fine on another box. Tried unticking the boot loader. Disable the floppy, removed the floppy.
I am relatively new to Ubuntu. Where do I look for the cause of the problem? I'll cut and paste the install log files in a moment.
I have 9.10 installed and working like a charm, due to the problems I had last time, I decided to leave an empty space to try and test upcoming editions, but I can't install it!
I get two error messages and can't get past the point of partition assignment.
Here's the screenshots. I'm trying to install on the free space.
i get this error whenever i update or install/uninstall a package Package operation failed
The installation or removal of a software package failed.
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
[Code]...
I downloaded the 32bit iso from the ubuntu website and wrote it to disc using imgburn.
The problem is that when i boot from cd i get the loading splashscreen with the 4 dots flashing then it loads the ubuntu background and my mouse curser spins around for awhile then tells me the installer encountered and unrecoverable error and a desktop session will now be run so you may investigate and problem or try installing again. When it reboots it asks for a username and password. i use ubuntu and blank and then it does a loop and the logon menu comes up again.
the computer is an old acer aspire running xp home sp2
i tried it on another computer a dell laptop running vista and it worked fine and can up with the menu and i clicked try now and it booted into the gui.
I'm trying to install an Ubuntu cloud on my home network - I've been following this guide. When I arrived at STEP 6: Install an image from the store PART 3: Click on the Store tab I get the following error message on the page: Error 60: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
View 1 Replies View RelatedWe are in the process of testing SLES 10 SP1 installation, onto a new system.
Initially the installation got failed at the start giving following error :
"Could not find the SUSE Linux Enterprise Server 10 Installation CD. Activating Manual setup program."
What is interesting to notice is , if we use SLES 10 SP2 to boot the system upto the Installation menu and then replace the CD with SLES 10 SP1 media, the installation proceeds as normal without any error.
Not sure that could be the problematic thing over here. Does it mean with SP1 , no cdrom/cd or hard disk gets detected ?
I tried to install JRE 6 After adding partner repository I wanted the updates by this command sudo apt-get updateI got the following errorE: Malformed line 54 in source list etc/apt/source.list (dist parse)what does it mean and how to rectify.
View 1 Replies View RelatedI have tried and failed to install the lastest netbook version 10.10 on my Acer aspire one 110 netbook, this is the one with a 8gb ssh.
It booted fine on a usb drive and I was able to test drive the distro. The installation went all the way through without any problems but when it came to rebooting the netbook just showed a blank screen with a dash in the top left of the screen. There is no sign of the computer looking for the hard drive it just sits there!
If I reboot using the usb key I could see that all the files have been installed on the 8gb drive. I have reloaded 10.04 which works just great and during that installation the installer could see that 10.10 was installed.
Has anybody else had this problem? I was wondering is there is a problem with GRUB , however it would be nice to install the new version it's so frustrating to have failed.
I was trying to install a RAR extractor called Peazip (http://peazip.sourceforge.net/) I selected the 64-bit package (I run Lucid) and went for it. Everything extracted ok, and the package met all requirements. However, during the installation process, it hung. No movement. I closed out of the installation, and restarted, to attempt a second try.
Now, when I try to install anything:
Code:
(Only been running this OS for, oh, what, a week? And I already hosed it up! )
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
explain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.
View 4 Replies View RelatedI decided to do a clean install of 10.04, the machine was previously running 10.04 from being upgraded day by day from a beta install.I used checked good 10.04 live CD as live and gparted to delete a partition on sdb. My intention was to install into the largest free space on the drive, (which I ultimately did). There are two HDs on the machine, Windows on a partiton and a couple of installs of ubuntu on the first drive, the second drive had unpartitioned space and ext4 data partition and a swap.
I then restarted and after a space bar press, used the menu second option to install Ubuntu.I subsequently saw an error window:Installation failedThe installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.Just in case, I did the whole thing a second time, but same result.I continued, using the subsequent desktop session. I chose the desktop Icon to install Ubuntu, which all then seemed to go okI am an experienced user, so I have confidence in Ubuntu, however, I believe new users would be suffering a loss of confidence at such situations.
I have a dual boot PC, tried to upgrade to Lucid Lynx and the upgrade failed. Can't boot into it at all. Windows XP still works fine. I have the live CD for a re-install now. I read this post but don't understand the difference between the instructions for the partitions. Have posted my screen shots below.First screen shows that I have 10.04 and offers me the option to partition further.Screenshot 1 I choose manual partition and then it gives me the right sized partitions. . Then in screenshot 2 I edit and choose the mount point as /, is that right? (screen shot 3). Do I then change that option again to choose /home? because otherwise it takes me straight to screenshot 4, the user name set up.There's No Custom User Title Here
View 5 Replies View RelatedTo run applications compiled for RedHat 4 Enterprise (gcc3.4) on RedHat 5 Enterprise (gcc4.1), what should I do?
View 4 Replies View RelatedI've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
I have a problem in red Hat installation, I have windows 7 installed in my PC,I want to dualboot it with linux. whenever I try to boot linux from DVD, I have the following message after some time "waiting for hardware to initialize" and the installation stops.What would be the problem for this? I have the following system configuration ASUS P5B WIFI AP motherboard. core 2 duo E4500 processor 2Gigs of RAM Nvidia geforce 9400GT GFX card.
View 3 Replies View RelatedI have an installation problem that I cannot resolve. The problem arises during the installation process, using the Fedora-10-i386-netinst.iso image, burnt onto CD.Immediately after setting up the network card, I am given the error "Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again". Since the installation process is text-based, I do not have the option to edit the repository list, and consequently, have to abort.This is the spec of my machine:
Pentium 166 (yes, it's very old, but it should work, no?)
132MB RAM (just about enough ram for minimilistic server)
80GB hard disk
[code]....