I am on a 10.04 desktop, it was previously set to only upgrade to LTS releases. I have change it to do normal distribution releases. This is checkable in the update manager and /etc/update-manager/release-upgrades
[Code]...
I'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
Since 9.10 was available, I've been unable to upgrade to the next distribution. Today I actually took the time to copy down and make note of the error given. The pop-up error is this: Could not calculate the upgrade
[Code]...
I am trying to upgrade my ubuntu distribution from 9.10 to 10.04 using update-manager. I have only 2G free in my / partition, and update-manager complains saying it needs 4G free in the / partition to upgrade.
I presume the space is needed to store downloaded packages. Is there any way I can change the download directory to some other partition (i have plenty of space in other partitions)?
Every where I look online, people are posting ridiculous non-working ways to upgrade their system from one release to another--they do not work for me and I need a definite expert reply. I am working with a fresh install of Debian Lenny/Stable and wish to upgrade to the frozen Squeeze distribution. Supplementing the word "squeeze" in place of "lenny" in my sources.list file does not work and believe this to be an inappropriate way of upgrading. I have tried upgrading apt, dpkg, and aptitude before beginning the upgrade process, cleaning dpkg cache, rebooting, etc.
After updating the above packages I tried all methods of upgrading: safe-upgrade, full-upgrade, and dist-upgrade. All produce dependency problems and try to remove the gnome-desktop package or upgrade everything else except gnome-desktop. (Other packages are also affected, gnome-desktop is the most important in this instance). As I understand it, when upgrading you can comment out the volatile repositories as well as the security updates, is this correct?--either way I have tried countless combination's off commenting/uncommenting to try to get the needed results. I do not want use sid repos or reinstall.
I have an old copy of Ubuntu Feisty Fawn 7.04 in a virtual machine that I haven't used in a long time. I want to update the distribution to the latest but I'm not seeing an option to do so under the upgrade manager or the synaptic package manager. When I attempt to refresh my package information I get an error message talking about how the repository is no longer valid. I've even tried to open the terminal and type: sudo apt-get dist-upgrade and it doesn't do anything.
View 3 Replies View RelatedI was running 8.something on my ubuntu server. Today I decided to upgrade releases! So I started it, all via ssh cos the box is about 800 miles away and it was going just fine. However - I went away from the pc for about a hour, and my ssh session died. On reconnect it starts a new ssh session - and I dont know how to reconnect to the upgrade process and finish it off.
View 9 Replies View RelatedWhile attempting to do a distribution upgrade with Yast Wagon, I got the following after selecting to configure later:
randall@linux-xmay:~> gnomesu yast2 wagon terminate called after throwing an instance of 'YUIUnsupportedWidgetException' what(): Unsupported optional widget type: ContextMenu YaST got signal 6 at YCP file Wizard.ycp:691 /sbin/yast2: line 440: 15947 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS randall@linux-xmay:~>
How to fix or get around that?
I would like to install a program (R for statistical computing). I am using Slackware. On the download page of R (The Comprehensive R Archive Network) there are options to download the code for Debian, Redhat, Suse, and Ubuntu. Which one should I download in my case (using Slackware)? Is there any of them which I should not download?
View 4 Replies View RelatedIs there any good way of distribution a ubuntu installation on workstations using PXE?And is it possible to pre-configure the installation with various settings?
View 4 Replies View RelatedHow to customize the Ubuntu Installation for your Distribution - TUTORIAL I have looked a lot in almost every page in Ubuntu, Google and some other Linux Distributions Forums, Help Guides and Tutorials, and have never been able to customize, or even find a valuable source on customzing the Ubuntu Installation, also known as Ubiquity. Now if you are planning on creating a LiveCD or Ubuntu-based Distribution using Remastersys or some program like that, then you will love this tutorial, as do I. First of all, make sure you have Ubiquity installed.Quickly goto Synaptic now, and check. Once you have that, go inside a terminal and type sudo nautilus.Then goto /usr/share/ubiquity. You will see some system files which I will now mention again in this tutorial for the sake of my tiredness.
Here you will see the images that are presented when you select your region in the installation process. You may customize it, but I hardly recemmond it as the areas I tell you to customize are far more rewarding. Now, just go inside the "ubuntu" folder and see the "logo.png". Customize it to have your own Logo and Distribution Name. After you finish that come out of it, all the way back to /usr/share. Now we go inside the big area, where we customize a LOT. Go inside "Ubiquity-Slideshow" folder. In this folder you will see the images and text that pop up during the installation of Ubuntu. Do you remember?
Now just go into Slides/icons and here you will see the beautiful icons of all the slides. You may notice the extroadinary graphics and input the Ubuntu team has put into most of these, and so I have decided not to customize this, but you can surely go ahead. However, for legal sake, I had to customize the logo which I have changed it to be mine (that is I deleted the Ubuntu logo and replaced it with a High-Quality version of my logo). Once you feel you have done enough, please go out of that folder and scroll straight down to customize the writing on the slides in the installation.
Here you will see 13 .html files. HTML is simple, you do not have to know anything in HTML to customize these files, however you must understand to not go out of the boundaries. Stay in the templates, because saying too much will look un-Professional and dodgy when it comes to size issues. I prefer Cutting huge paragraphs of writing in between the "" and starting to type about the subject in My Distributions way. Making sure that I do not exceed the previous 3-4 sentence that Ubuntu already had. Ok, to customize these .html files I will quickly show you one of them and customize it before I fall asleep on my keyboard. Right-click "accessibility.html". Click OPEN WITH and select GEDIT.
You will see something like this, however where it says Gosalia, that is my operating system, it used to say Ubuntu. CAUTION - Do not copy my work, there will be severe consequences, considering I took 5 minutes to write it and the rough work your Operating System installation will look...
Quote:
<h1 class="title">Accessibility in Gosalia</h1>
<div class="main">
<div class="content"><ul>
[code]....
Enjoy, do this to all of them remembering to only write in between the <li> and the </li> Remember one thing, where it says "UBUNTU" you can change it, unless it is a file name, then DON'T CHANGE IT! Oh yes, and now when you create your ISO with Remastersys (or equivalent) then you will have your customized Installation ready in the LIVECD process, check it out! It worked for me, and it is spectacular. Making a Video about this now...
I'd like to upgrade my 9.10 desktop to 10.04 but I can't get past step 1.I've done alt-f2 and issued update-manager -d, but no "New distribution" option is presented.I've clicked the "check" button and updated all my repo information but that doesn't help.I've done a wireshark trace and observed that the update-manager's requests get through the corporate firewall, and responses come back.Somehow it determines that no new distro is available.I'll explore further if someone could help me out with getting hold of the relevant update-manager source code.
View 2 Replies View RelatedI've been yum upgrading since Fedora 3. For the first time, I did a fresh install with Fedora 15 and I found that ibmcam.ko is no longer part of the distribution in any way (even through rpm fusion). Is there a replacement for ibmcam.ko so I can get my cam working again?
View 6 Replies View RelatedIn the past I have used Slackware, but I changed to Gentoo because Slackware don't have a nice package manager. I like Gentoo very much, because you have control over your installation from the very beginning. You can tweak your installation, before it's a running installation.
The main problem is that you need to compile everything from source (this has some benefits), but i haven a 3.0ghz pentium 4, so compiling a full system takes days. That's not I want.
Because of that I tried Debian, it's nice because of the large collection of precompiled packages. However, it's seems like it is less Stable then Gentoo (i run debian sid, because i need the newer applications). It's also harder to configure to my needs.
Is there a (Gentoo-based) distribution that gives the user a lot of control on the installation proces (like gentoo) and afterwards gentoo-like configuration (it was so much better then Debian, for example: Where is the xorgconfig utility in debian? I know there is something called dpkg-reconfigure to configure X, but that didn't asked me about videocard and monitor settings, only keyboard related options)
But the distribution must have binaries for all (or at least a lot of) programs.
Is there such a distribution? What does come closest to my needs?
I am looking for official recommended web site to download and install MySQL 5.1 version RPM installation for 64-bit CentOS 5 distribution?
View 3 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
This new feature of either making me wait a full minute or yet a confirmation of what I have already prompted the machine to do, ie. reboot or shut down, is a brainless waste of code. If it were a little easier to "accidentally" reboot it would be a different story. But to manually open the shutdown menu and click "shutdown" or "reboot" and then have the machine make me wait or manually instruct it to proceed with the command I have already issued is just, ... well, it's just plain dumb.
It's probably derived from the same logic which "upgraded" the package manager to only allow one package selection at a time. Yet another brain fart. I'm going to get "upgraded" right into another linux distribution if this kind of idiocy continues!
I'm running 8.04 on my desktop system. I haven't used it in quite awhile, but I logged in today to find 100+ updates and figured I may as well update the system.
Then I realized that unlike my other Ubuntu machines, I don't have a "New distribution release is available" prompt in the update manager.
I went ahead and ran the 100 updates and rebooted and still don't see that option.
What's the best way to upgrade to 9.10?
I have never in my life got this to install correctly. No the recommended drivers dont seem tow work well for me so I want to install the drivers properly from the website. Something that people have said solvs many problems. I keep getting "The distribution-provided pre-install script failed! Continue installation anyway?" Anyways here is my log.
Quote: nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Sun Aug 15 15:34:52 2010
installer version: 256.44
[Code].....
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies View RelatedI am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?
View 7 Replies View RelatedI would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies View RelatedI tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View Related