Ubuntu Installation :: Installer Does Not See Any Partitions
Feb 14, 2011
I try to install Ubuntu 10.10 on HP notebook G62 (Intel-i3, 64-bit). It have a 320GB hdd with my laptop which now consists of:
1) SYSTEM volume
2) (C: ) volume with windows 7
3) RECOVERY (D: ) volume
4) HP_TOOLS volume
1 to 4 are originally there. And now I shrink (C: ) by 50GB to get a unallocated space in which I decide to install ubuntu: First I try to shrink by Windows7 tools, but installer did not see unallocated space (but shows list of my volumes). Then I install Acronis disk director and made 50GB unallocated space by Acronis. After this Ubuntu installer does not see any volumes on my HDD Windows7 boots had works normally. I try to restore ALL from image by HP TOOLS but without result - installer doesn't see any volumes. I try boot from CD, remove dmraid and all raid package and try run installer - no result.
View 9 Replies
ADVERTISEMENT
Mar 22, 2011
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
View 9 Replies
View Related
Jun 5, 2010
I have windows installed in c drive and there are 3 other partitions namely e,d,f.I booted kubuntu/ubuntu live cd.The installer doesnt show any partitions.This is my windows:- http://imagebin.ca/view/Uj-KB26v.html
This is at kubuntu at installer step:- (Same is the case with ubuntu)http://imagebin.ca/view/wZBYBV.html
fdisk -l report:- http://imagebin.ca/view/CH8fiE6r.html
I tried alternate cd also...no change!
View 4 Replies
View Related
Nov 28, 2010
I'm trying to install Ubuntu 10.10 from my live USB disk. In My computer, it is showing all drives correctly, but when I try to install using the installer on desktop, it is showing the whole hard disk as free space and no partitions at all.
when I tried 'sudo parted' and then print command, I got the below error message.
Error: Can't have a partition outside the disk!
I formatted the C drive from linux using ext4 filesystem.
How can I make the ubuntu installer recognize my partitions?
View 3 Replies
View Related
May 5, 2010
When trying to install Ubuntu 10.04 desktop from USB pendrive I can't see the sda partitions in the manual partition editor.I have a dual boot PC with Windows XP Pro and Ubuntu 8.10 running (see below for more details). Using the 10.04 Ubuntu desktop edition on a USB stick (pendrivelinux), I can boot without a problem and everything works fine: mount/unmount of all my drives, read data, etc. But I can't install the 10.04!When running the installer, at the point where the partition is selected, I choose "manual" as option. On the next screen I only see the drives/partitions starting from /dev/sdb1... to sde, but NOT /dev/sda. The "Add" button is greyed out, I can only edit the existing partitions. When I edit and press forward I get an error telling me that the SWAP partition is missing. I already HAVE a swap on sda.
I also tried booting Ubuntu 10.04 and then running the installer - no difference. I also remove the plug from one of the drives (sde) - still the installer doesn't show me sda.I would like to install 10.04 without messing up my Windows XP Pro and without messing up my /home partition or any other partitions that are non-Ubuntu stuff.In former years this used to be the easiest part, now it looks like a challenge. Any help is appreciated. System and background info:Hardware: Desktop PC with Intel Core 2, Nvidia graphics card, 5 SATA hard drives hooked to Gigabyte mother board, two network cards (only one in use)Current OSes: Windows XP Pro on sda1, Ubuntu 8.10 on sda and sdb
View 9 Replies
View Related
May 10, 2010
When I tried to install Ubuntu 9.10 or 10.04 (from CD or USB drive), and selected manual partitioning, the installer would not show all my drives.
However, when booting the life CD/USB, gparted or the Disk Utility did recognize all drives and partitions.
It turned out that one of my drives was marked as RAID partition, although I never used RAID!
Here the symptom:
When you run the installer and select "manual partitioning", the resulting list of drives and partitions is incomplete. In my example it was:
sda
- sda1
sdc
- sdc1
[Code]....
You may have multiple drives with the RAID metadata on it. In that case you need to repeat the above command for all those drives. Just make sure you don't wipe out your existing RAID, if you have one.
Reboot the system and see if it works.
P.S.: Also check your BIOS settings - do you have drives configured as RAID?
View 5 Replies
View Related
May 22, 2010
I'm trying to install ubuntu 10.04 on an old computer, but the installer doesn't have any listed partitions and I can't go any further. The hard drive I'm trying to install it to was just formated in Windows 7, it's a clean hard drive. Uh, how am I supposed to install it?
View 1 Replies
View Related
Jul 2, 2010
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
View 9 Replies
View Related
Sep 3, 2010
I have two hard disks, the one that I work with and another one for backups. The main HD had an OS (Ubuntu) partition, a partition for /home and a lot of free space.I installed latest Mandriva creating a new partition. Everything OK. But it overwrote GRUB and I couldn't boot into Ubuntu, so I reinstalled GRUB from the Ubuntu live CD. I got my Ubuntu back, but then it wouldn't boot into Mandriva. Well, I didn't care. But now the problem comes.
Right now, if I try to install Ubuntu from live CD, the installer won't see the partitions in my main drive. It sees the partitions in the backup drive, but the main drive appears as empty, no Ubuntu, no Mandriva, and no /home. Debian testing installer did just the same. Those partitions are there and I can boot into them and see them; it's only the installer that does not see them.
View 2 Replies
View Related
Apr 11, 2011
Wanting to dual boot XP with UBUNTU. Live CD verified good.
ran df in terminal:
Ran sudo fdisk -lu in terminal:
Partition table entries are not in disk order
Originally I had two partitions for Windows xp of 100 gig each. I cleared / backed up the second partition and created two 50 gig partitions, splitting the second into two linux (using Gparted) partitions labelled root and swap.
Disk Utility sees this hdd as a RAID component. It is connected through a RAID controller.
The installer (in allocate drive space step) doesn't see them for some reason.
Hardware:
AMD Athlon 64+clawhammer processor
Asus A8N-SLI mobo
hdd as above
2 Gig RAM
DVD / CD Burner
View 5 Replies
View Related
Jun 20, 2011
I am having trouble with the advanced partitioning, I dont know what any of the mount points are for. I have a 64GB SSD which I want to use only for the boot files, and I have a 640GB which I want to place everything else on, as to preserve the life of the SSD. How should I configure my mount points/partitions in the ubuntu 11.04 installer?
View 6 Replies
View Related
Mar 15, 2010
The instaler doesnt find my partitions and the XP that is installed too! For some reasons i cannot delete the whole hdd... if i format the partition, where (i want to install ubuntu) with fat, the pc crashes during the installing process after the tastaturlayout question! if i try some other formats, the installer tells me, that there are no Operating Systems installed and the hdd is unpartitioned!
if i start ubuntu live from the cd, the system finds all partitions, but if i run cfdisk in a terminal, i get a fatal error (cannot open disk space)... My machine is a acer aspire 1694 WLMi (pretty old, but should be no problem), bios is up to date, Windows is XP home edition with SP3.
View 6 Replies
View Related
Apr 17, 2011
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies
View Related
Apr 4, 2010
I am booting from a USB stick live CD image of Kubuntu 10.04 Beta. When I run the installer, and choose the "manual select partitons" option, it lists only my full hardisk, whereas I have atleast 5 partitions on it, and none are shown. Could anybody help me with this? I want to install on one of the partitions and leave the rest intact. I am dual-booting BTW.
View 4 Replies
View Related
Jan 25, 2010
I recently obtained a new computer from my brother, and after putting the old one away (which had Ubuntu on it), I began the search for my disk. I found it, and installed Ubuntu, but I did something in the partitions, as the Linux partition now has 3.3 GB of space, thus being full from the start. What I did was pick the option to manage the partitions manually, as I didn't want to use the whole HD (too many important things on Windows), and when I hit "use largest available space" and slide the slider on the partition bar (or didn't), it kept coming up with errors. So I edited the partitions manually. It's roughly a 120 GB HD, and I separated it into four partitions: one 50 GB one (with Windows on it), one 70 GB one, one 7 MB one for swap space, and then the root file system. I think what I did wrong was the 3 GB one; and now I'm guessing that the root filesystem was the partition Linux was installed on, which I had forgotten since my first install. Is there anything I can do short of reinstalling?
View 3 Replies
View Related
Apr 18, 2011
Currently, I have a dual boot set up with Ubuntu and PCLinuxOS. I have a separate / and /home partition for both (ext4). When I run the installer, it claims the whole disc is empty. I tried the expert option and loaded every module that seemed to have to do with partitioning, but that made no change. Is there some simple option I am missing that might help it recognize that there are existing partitions? This was the "testing" installer if that makes any difference.
View 3 Replies
View Related
Jul 6, 2010
I am currently running an Asus EEe PC 1000H with Windows 7 installed on it. I am trying to set up a dual boot with Debian. My problem is: I boot the netbook via an SD card with the netinstaller image. When it comes to create partitions, the installer tells me, that my HDD is completely empty, which is not true. I have 3 partitions, one with w7, one with stuff (fat32) and one empty, where debian should go. Because it doesn't recognize my partitions, it only wants to create a new partition on the supposedly empty HDD, which is not what I want. Why does it not recognize my HDD? It always worked with Ubuntu, LinuxMint etc.
View 1 Replies
View Related
Nov 2, 2010
My PC configuration is as follows:
CPU: AMD Athlon II 245 X2
RAM: 2GB DDR2
MB: ASUS M2A74-AM
SATA DVD-Writer
WD 320GB SATA HDD.
SATA Controller is in AHCI mode in BIOS.
Partition Table:
1. Pri. (Windows 7 Ultimate)
2. Log. (Data)
3. Log. 15GB free space (want to install Linux in this partition)
I want to install Debian 5.0.4 from DVD. But the installer is not showing any partitions, it says entire hard disk is blank. But I ran 'fdisk -l' in the console, it shows the partitions correctly.
View 4 Replies
View Related
Mar 3, 2010
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
View 3 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
May 3, 2010
I have three physical drives:
Drive 0: Used for paging file in windows and general temp file storage
Drive 1: Media storage
Drive 2: Windows installation
When booting off the Ubuntu 10.04 disc and running the installer, it gets up to the partition step and doesn't find my Windows installation (for the automatic partitioning and such) and lists Drive 0 as the drive it will install to. I really want it to see my Windows install and create a partition on that same drive. Can anyone help me in getting the installer to see the Windows installation?
View 5 Replies
View Related
Feb 19, 2010
The Ubuntu installer hangs on step 3 0f 6, the stage in which you select the keyboard layout. The computer it is being installed on is a Toshiba Satellite.disk had previously worked to install on a macbook for dualbooting.
View 6 Replies
View Related
May 28, 2010
change as I salvaged an old old computer and got it back into working order. Windows 7 kills the computer and the media being served is sluggish and slow.
The computer spec are as follows:
Asus A8N32-SLI Deluxe Bios 1303
Asus Nvidia En210
[code]....
View 8 Replies
View Related
May 28, 2010
I would like to get Linux working on my new Compaq CQ10-130ca. I was on ubuntu a few days ago, and the was a fast and easy way to create exactly that. Now I come back, the site has changed, and the USB key method too! I have tried to follow the instructions, but failed completely.,. Does anyone have an "easy" way to do this, or at least clearer explanations on how to proceed ?
View 8 Replies
View Related
Jul 11, 2010
i cant install 10.04 on my desktop with the 32bit or 64bit versions of 10.04 desktop.
i get to step 4 and there is nothing listed for partitions or any information and if i click forward, i get that message "no root file system is defined" "please correct this from the partition menu"
View 1 Replies
View Related
Aug 16, 2010
I am attempting to install 32 bit ubuntu 10.04-i386.iso from boot on a Windows XP Pro standalone desktop PC. I have unused hard drive partitions available for the ubuntu installation. At one point the installation dialog box informs me that there is no OS installed on the PC, and the installation program does not correctly indicate the existing Windows hard drive partitions. At that point I abort the installation process.Can anyone advise me how to proceed from this point. I am an old MSoft OS user from way back - I started when DOS was all that there was. I am a complete novice however where Ubuntu is concerned.
View 1 Replies
View Related
Dec 28, 2010
I have Mint 9 installed on a 120GB, WD SATA HDD. Now I want to install Ubuntu 10.10 on this HDD. Downloaded i386 desktop image and created a bootable USB stick with the image. System boots fine but installer do not detect My HDD. It only lists my USB drive. Even Gparted donot detect the drive. Typing sudo fdisk -l also lists only my USB Drive.
View 3 Replies
View Related
Jan 12, 2011
I have a Ubuntu 10.10 live cd for 32-bit. However it does not work with my system--I am guessing it has something to do with having more than 4 gigs of ram.
Anyway I am wondering if there is a way to install ubuntu 10.10 64-bit with Windows 7 64-bit.
View 4 Replies
View Related
Feb 24, 2011
I'm trying to install ubuntu 10.10 onto my desktop via usb. Depending on the tool I use to put the image on the USB drive, I get the following outcomes:
Universal USB Installer
whatever the default in results in no signal after the kernel has done it's work (i.e when the graphics kick in)
"Install Ubuntu to Hard Drive" results in a quick flash of graphical garbage, then an 'incomplete' gnome desktop; the wallpaper is there, a blank menubar with some of the top-right icons (like power etc.) but nothing else. Mouse moves but left, right click and keyboard does nothing. Can't move to the different terminals either.
UNetbootin One option is a blank screen, another results in graphical garbage which appears to be whatever was left in video ram? There was a cool collage effect of my windows logoff screen cursor is fully formed and moves, but that's all.
This isn't limited to Ubuntu 10.10; Fedora 14 has the same problem, but I can boot into basic video and get a desktop. Obviously, I don't want Fedora
I'm assuming my problems are the result of the nouveau video drivers, so my question is this; how do I get ubuntu to use an okay (preferably not basic vesa) graphics driver so I can install? And if I can do this, will enabling nouveau again (a newer version hopefully) cause my problems to continue?
Specs:
Asus P5Q Deluxe Motherboard
Intel Core 2 Quad Q6600
Nvidia Geforce GTX 295 (original revision)
View 3 Replies
View Related
