I have just started to learn abit about websites so I thought I would learn from internet, I have followed w3schools.com I have done what they said infact I copied and pasted in to ooo saved as index.html my problem is how do i view it, I opened firefox opened index file but allit shows is what I pasted not showing up as web page any help pointing me in right direction.
View 9 Replies
I've looked around the other threads as well as the wget man page. I also Googled for some examples. I still cannot work it out. From the page [URL] I want to download the 48 linked files and their corresponding information page.To do this (the first file) by hand I click on the line that saysApplications (5) Go to the first optionDell - Application Open and copy the linked pageApplies to: Driver Reset Tool Then back on the first page click on the Download button. On the window that opens up I choose to save the file.
Then I move on to the next option (which is Sonic Solutions - Applications) and repeat this until I would have all my files. I do not want to download the many other links on this page. Just the above mentioned, so I can take it back to my internet-less place and refer to it as if I was on the net. I am using the 9.10 LiveCD at my friends place.
Reading local pdf files with okular.
However, when I visited this site [IMG=http://img185.imageshack.us/img185/4708/snapshot1u.png][/IMG](consisting of a pdf file), I am unable to view the site.
Only, upon installing acroread, the site/file is then visible.
Note that BEFORE installing acroread, the site can be viewed with konqueror. [IMG=http://img718.imageshack.us/img718/1353/snapshot2hh.png][/IMG]
How can Firefox be configured to view the site without installing acroread?
I have been working in macromedia dreamviewer for editing html and php files, Just now I moved to linux system by installing xampp , my question is that I need a best html and php editor that supports both the design view and code view as like in dreamviewer.
View 7 Replies View Relatedhow to convert webpage to pdf?
I've tried the command:
$ wkhtmltopdf linuxandfriends.com linuxandfriends.pdf
but it shows:
xxx@xxx-desktop:~$ $ wkhtmltopdf linuxandfriends.com linuxandfriends.pdf
bash: $: command not found
I have kubuntu Lucid. When I open this webpage: [URL] My firefox use a lot of CPU.
View 5 Replies View RelatedI inadvertently blocked a web page and get the following message when I try to open it using Firefox.
"The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. * This problem can sometimes be caused by disabling or refusing to accept cookies."
I can change users and access the web page or change computers. No other websites were affected. Is there a way in Ubuntu or Gnome to unblock a website to accept cookies?
I would like to know if there's a way of using FileZilla or another FTP client without having a web page. My intention is to have my files on a server and download them form time to time from different computers using FileZilla's portable version. It would also serve as a Back-up copy of 'em. If there's no way of doing that, I can get a subdomain from, that is free and without a file limit?
View 4 Replies View Relatedif it was possible to get ubuntu to automatically open Firefox to a particular webpage at a specific time monday through friday. The webpage in which i am referring to is not my homepage. in mind that I am completely unfamiliar with scripting
View 2 Replies View RelatedIs this possible?
View 3 Replies View RelatedI'd like to retrieve information from a website. It's a dictionary type of website, each page of the dictionary has a URL, i would like to get the content of each page automatically in RTF.
Here is an example: [URL]
Is there any program to do this?
It takes a long time for firefox to actually find every website I go to. It sticks on looking for [URL] and then eventually finds it. It isn't the connection because I tested it and its fine. I am using Ubuntu 10.04 and firefox 3.6.3
View 7 Replies View RelatedI am newbie, and i am developing my website.
My web-site's pages appears to be fine when i open in any browser (including IE, Firefox, Chrome) in windows..
but when i open the same website page in Ubuntu-Firefox the page has lots of css and font errors..is this a problem in ubuntu or my website?
my website link: http://www.beakkon.com
any suggestion on how to fix it?
i am also attaching the snippet of a page of my website when it is opened in Ubuntu-firefox.
I have recently put together a website for my local club using Kompozer, Filezilla, and other open-source apps:
[URL]
Very simple; no CSS or frames, just tables. My question is this: How do I get the webpage to appear uniform on all displays? When I work on it on my own machine all is looking good, everything nice. But when I go to the club and check on one of their boxes or use a computer somewhere else, things are bent out of shape; the layout is too wide or thin, things are oversized or not, the main heading is on two lines instead of one. A real dog's breakfast.
I learn as I go but one thing I'm figuring is that I should scale my images in Gimp to the desired size rather than drag them to size in Kompozer.
I have looked for an answer to this, tried a few things adding various code to the page, but nothing so far seems to be working. I'm sure this is simple fix but I just haven't stumbled over it yet.
I recently saved a large number of web pages from a website on my computer and all of them contains images. I needed help extracting all the images from the webpages(all of them) there are about 17000 saved webpages in the folder and all of them have images. I am not sure how to extract images from webpage in batch. google search dint turn up anything.. is there lika a tool or something for the job or should a script be written for it?
View 9 Replies View RelatedWhenever I enable the TOR network in firefox using the torbutton, everything stops working. Clicking on links won't take me to a page. It seems like I cannot navigate to any webpage when TOR is enabled.When I disable it everything works fine.
View 9 Replies View RelatedI would like to make a short cut to a webpage just like on my iPhone but I would also like to make a custom icon for it too and if possible different properties..
I want the shot cut to go also open in full screen mode as it'll be a direct link to a game I play but at the same time I don't want firefox to be in full screen by default. Is this possible to do?
I have recently upgraded to the new ubuntu 11.04 but am having problems with the internet. Often When I try to access a website it takes a long time (5-10 minutes) to load even google, and sometimes I just get the following error message:
This web page is not available. The server at google.com can't be found because the DNS lookup failed. DNS is the web service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Chromium from accessing the network.
Here are some suggestions:
- Reload this web page later.
- Check your Internet connection. Reboot any routers, modems or other network devices that you may be using.
- Check your DNS settings. Contact your network administrator if you're not sure what this means.
- Try disabling DNS prefetching by following these steps: Go to Spanner menu > Preferences > Under the Bonnet and deselect "Use DNS pre-fetching to improve page load performance".
- Try adding Chromium as a permitted programme in your firewall or antivirus software's settings. - If it is already a permitted programme, try deleting it from the list of permitted programmes and adding it again.
- If you use a proxy server, check your proxy settings or check with your network administrator to make sure that the proxy server is working.
- If you don't believe that you should be using a proxy server, try the following steps: Go to Spanner menu > Options > Under the Hood > Change proxy settings and make sure that your configuration is set to "no proxy" or "direct".
Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
I have tried to access the internet using Chrome, Firefox, Konqueror, on the Untiy Desktop, and the Classic Desktop. I've checked my Proxy settings in Chrome (My main browser) and its set to direct internet connection. I've Disabled the UFW. I've edited the resolv.conf which initially showed:
Code:
# Generated by NetworkManager
domain HG532.com
search HG532.com
nameserver 10.0.0.1
and edited it to:
Code:
# Generated by NetworkManager
domain 10.0.0.1
search 10.0.0.1
nameserver 10.0.0.1
and even tried the Google DNS server:
Code:
# Generated by NetworkManager
domain 8.8.8.8
search 8.8.8.8
nameserver 10.0.0.1
But nothing works. It seems like When I initially log on to the internet it runs fine, but over the coarse of 10 minutes the page loading times go down then eventually I just get the above error message. There are other computers here running windows which connect through the same wireless fine.
I'm using firefox and I'm trying to block [URL] by ading the line 127.0.0.1 [URL] in /etc/hosts but it don't work. I get this error message in terminal;
Code:
(gedit:11640): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.ZTL1UV': No such file or directory
(gedit:11640): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
I'm thinking about making some offline splash page for Ubuntu (Similar to how Jolicloud functions) I'm wondering if it's possible to be able to launch an application (For example, gedit) by clicking a link on the offline webpage?
View 3 Replies View RelatedI'm trying to embed a video on my website, and It keeps asking me if I want to save it, instead of just playing it. How do I embed to play and not pop-up the "save" dialog?
Today I demonstrated a simple SSH dictionary attack for a friend. Lucky for you - I also recorded it. (I've made my pw ridiculous and re-secured the box so don't even try it now lol - it'll take 100's of years to crack brute-force).
Anyways, here's what you'll need:<ol><li><a href="http://nmap.org/" target="_blank">NMap</a></li>
<li><a href="http://www.foofus.net/~jmk/medusa/medusa.html"
[Code]....
That's what I have. It shows the box where the video should be - but doesn't play it, just asks to save. Not sure if it's something with my browser plugins... or my code on my page... ? Tried with FireFox and Rekonq - same results. Tried with many different embed codes as well - all same results.
I would like to set up a proxy server at home which i can use to access sites from work. I was thinking a web-page i log into and then a sort of use like a browser? like this for example, but where i can have a secure login
View 4 Replies View Relatedi want to make a webpage so that only people on my network can see it. how do i do this
View 9 Replies View RelatedCan someone point me in the right direction for adding SSL to a webpage?I've installed Phpmyfaq, on an Ubuntu 9 server, but I want to set it up so that logging in is done securely.
View 1 Replies View RelatedWhen clicking on a file in a webpage such as a .tex file the default viewer is mousepad. I search for Emacs to open it, but browsing gets me no where. How do I find it or set it so that I can open directly files in it without explicitly saving them
View 2 Replies View Related[URL] "Click the big orange button to download the latest version of Ubuntu." I ran the tool and it started downloading 10.04 not 10.10.
View 1 Replies View RelatedI am trying to setup a virtual machine server as a web development environment. Install and setup is going correct. To avoid any accidents I have the apache alias set to www.example.dev instead of www.example.com. The URL will redirect no problem but I need to find a way to have every instance of a link (example.com) show up as (example.dev) so that whole site will function on the server without linking to the live external site. I'm using git as a version control system that will push certain commits to my live site and thus want to avoid changing any configuration files to get this desired effect on my virtual machine. How to do this server side, maybe via PHP, apache2.
View 4 Replies View Relatedi try to access my webmin but it give me "This webpage is not available." now, webmin is useless for me if i want to uninstall webmin, is some other application will affected (like apache, mysql, etc) ?
View 9 Replies View RelatedMy plan is to set up a simple webpage using no-ip. I already made an account and downloaded and configures the client. Now I want to make the actual website (hosted on my local machine). How would I do that? I assume I would need a hosting software.
View 2 Replies View RelatedFireFox 3.6.17
HPLIP 3.10.2 with HP OfficeJet J4540 connected
CUPS 1.4.3
When I print from a web page, it prints 3 pages from a web page that looks like it would print more than 3 pages. It seems like only the first, second and last sections of a web page is being printed. Is there an easy fix to this?
