Ubuntu :: How To Unlock Qbittorrent Without Knowing The Password
May 21, 2011brother locks qbittorrent and i find it difficult to run ..... in his absence as he doesn't give his password. So how should i unlock the code
View 2 Repliesbrother locks qbittorrent and i find it difficult to run ..... in his absence as he doesn't give his password. So how should i unlock the code
View 2 Repliesbrother locks qbittorrent and i find it difficult to run ..... in his absence as he doesn't give his password. So how should i unlock the code
View 3 Replies View RelatedI just wanted to know if there is any possibility to decrypt a encrypted file with AES crypto without knowing the password.
View 1 Replies View RelatedFrustrated with ubuntu v11, i re-installed v10. At first my old authetication password worked. Then it stopped working and i can't make any changes because i don't know what word the blasted system wants. Am i locked out forever? Should i re-re-install v10 and everything else? or how i can change my authentication password without knowing what the computer wants?
View 9 Replies View RelatedI've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
I'm using Ubuntu 10.04LTS. I'm trying to configure my chat accounts. But after entering username and password, it is asking "Enter password to unlock your login keyring". I have entered my login password. But it is saying that "The password you use to log in to your computer no longer matches that of your login keyring."
View 4 Replies View RelatedI have it set up to go idle after 5 minutes and ask for a password to unlock, and none of these happens.
View 5 Replies View RelatedI just re-sized my windows partition on my laptop and installed 10.04.1. Brand new clean install. I set up my user account, gave it a password, and everything was fine until I tried to connect to my wireless. I typed in the security key for my wireless, and it asked for a password to unlock the default keyring. The problem is, I never set a password for the "default" keyring. I never changed my user password. I didn't auto-login, I entered my password. This was the first boot up of the machine after installing 10.04.1. I can't use Empathy, because the keyring cannot be unlocked. If I "cancel" it gives me an error saying the account details are wrong, but I log into my facebook, aim, and msn every day, so I know the passwords are correct.
I have read about other issues with the keyring and with the auto-login bug that is associated with it. I have also read up on the bug that occurs with that as well. I couldn't find anything about my specific situation, so I hope this isn't a re-post of an issue that has already dealt with, but I did look it up. If it helps, the laptop I am running is a HP Pavilion dv7-3065dx, and I have Ubuntu Desktop 10.04.1 x86 installed. Clean install and the only thing I have done was log in, connect to network, and try to set up Empathy. Both Empathy, and connecting to network, gave me the issues with the keyring. It appears that there is already a password for the default keyring, it is not blank, and my user login password does not work for it. I'm at a loss...
Since upgrading to Meerkat, I have been getting a pop-up window with the message "Enter password to unlock the private key" every time I attempt to ssh into a server that does NOT use password authentication. I know some people like the remember password "feature", but I prefer just a plain unadulterated ssh session in a terminal. Does anyone know how to stop this message?
So far I have unsucessfully tried:
None of the above worked - and I was sure to log out and back in before testing the behavior.
I recently did a clean install of Maverick Meerkat and copied a few configuration files from my old system. I can log on normally, and the system works just fine. However, when I lock the workstation with any method, the system will not accept my password. I'm certain that I'm typing it correctly (I tried over 20 times) and that the capslock is not on. When I reboot, I can log in again just fine. In other words, my password only works at initial login, not when unlocking the workstation.
View 4 Replies View Relatedusing ubuntu 10.10.. firsly it was asking me for password when i open my computer but i disabled that option and now it doesnt ask me.. but there is something else.. the desktop appear.. and i receive a message like i have to enter password to unlock the login keyring something like that.. can somebody explain me why? what can i do to stop this? i can actually use the computer open folders do anything but the password box keep appearing.
View 5 Replies View RelatedI'm experimenting with the passwd command to become more failure it.created an user account that had no password to practice on. I tried using the -u option to unlock it go the response:Cannot unlock the password for 'duplicateTest'!Read the man page and it instructs me to add the -f option to force it to accept unlocking an account with no password but !. I type in:passwd -uf duplicateTestThe response is:passwd: invalid option-- 'f'I rearranging the options and it prompted me to enter a change of finger information. Tried separating them, bracketing them ect...no dice.Can't find anything else on the net but what is stated on the man page, to add the force option.
View 2 Replies View RelatedI have recently made a fresh install of Lucid Lynx. After restarting my computer (due to kernel updates), my log in password no longer unlocks my login keyring. I have never changed either password, so there is no "old" password to resort to.How do I fix this? I am not opposed to deleting whatever data is encrypted by this keyring. Also, how might this have happened? This could be a bug; are there any relevant log files or such?
View 1 Replies View RelatedI just did a fresh install of 11.4
My system auto-logs in and I know there's a bug in seahorse that doesn't like that method.
Anyway, I tried to unlock my "Passwords: login" in seahorse, but it won't budge.
The details about this user are that I re-used an 11.3 /home/$user directory. Could that be the reason?
I logged out of the Desktop and back in using my password manually.
I can sudo with my password. I can change the system with my password everywhere except in seahorse.
The password is exactly the same in 11.4 as it was in 11.3.
The .gnupg/ directory is 600 and its contents are all 600 except for agent.info which is 644.
Following a year old post, I got this from shell code...
I'm still fairly new to Suse(and Linux) I have an account on my system that is locked when i run passwd -S accountname i get 'accountname lk' as the response. However when i try to unlock it using passwd -u accountname i get 'Cannot unlock the password for accountname!'.Any ideas on why i can't unlock the account?
View 2 Replies View RelatedI have installed Fedora11 onto my Dell laptop; as nice as it is whenever I log in I am prompted to "enter password for default keyring to unlock". Now, I don't recall ever setting one up, each password I try (e.g. the user or root) fails and gives me the prompt again. After a few clicks of "deny" it does go away but I want to know what it is and if I can stop it from prompting me).
View 4 Replies View RelatedI am new to linux and ubuntu. I am using ubuntu Hardy Heron release 8.04 I have not used it in a long time and then when I did fire up the laptop. I get a message asking me to enter a password for keyring. The message is as follows; Unlock Keyring "The application 'Network Manager Applet' (/usr/bin/nm-applet) wants access tot he default keyring, but it is locked.' Password: _______________
Then I can Deny or OK it. How can I disable that and keep it from popping up. Also, it there a way to figure out/change the administrator password if you don't remember it as well?
I am using Ubuntu 10.10. I like to change the Lockscreen which appears when i need to enter my password to unlock the system. Currently it is apppearing fully black.
View 4 Replies View RelatedAfter installing ubuntu 10.10 on pc i had it running fine for roughly 2 weeks. i have selected automatic login so i do not need to mess about logging in etc, but recently my pc asks for my password to unlock keyring once it shows my desktop.
View 2 Replies View RelatedIt's about the promt for default keyring password after ubuntu boot. I cant get a screen-shot as print-screen doesn't work at that point.
The password mask (*******) symbol font size is smaller than any other password prompt (for instance gksudo). Is it only me ?
Should I report it as a bug ?
It's a minor problem but may be it's caused from something more serious as I have other problems.
Also this dialog window (of the keyring prompt) doesn't "woble". By that I mean that the effects that I've set are not applied to this window?
openSuSe 11.2/Pidgin 2.6.2/KDE4.3.1 Have seen various threads about this, but no real fix. Everytime I start Pidgin I get the annoying prompt to "Enter password for default keyring to unlock".
View 9 Replies View RelatedI wanted to upgrade qbittorrent to the newest version. So I went to the official website and followed the steps of typing some commands in the terminal. However, it said missing libtorrent-rasterbar5. I went to Synaptic and checked, showing "libtorrent-rasterbar6". Does this mean my version of libtorrent-rasterbar is too new?
And I've removed something regarding qbittorrent because I wanted to install rasterbar5. I searched for rasterbar5 in the Net and downloaded it. It connected to the Ubuntu Software Centre automatically but it showed unable to install.
So I thought I failed to upgrade qbittorrent. I just wanted to install the original version (v2.4.0). I did it like the first time I downloaded qbittorrent. Open the Ubuntu Software Centre and search for it and press "install". It failed! Because a type of repositories named "qbittorrent" showing conflict.
I've dealt with a similar problem regarding GIMP successfully before. But I can't remember.
I am using qBitTorrent. But whenever i am trying to download, it is having few issues.
1. It takes a lot of time to start the download. Last night it did not even start to download even after 15 mins. But when i put the same torrent in utorrent in Win7 partition it started to download immediately.. can somebody point out what is going wrong?
2. do i need to keep the qBittorrent open all the time till it finishes.. Otherwise it is not downloading... But in my Win7, when i close it, it automatically docks itself to the task bar.. (hav been using Win for a long time.. thats why i am comparing it to Win.. )
I really like qBittorrent.I would really love it if it worked in the unity desktop.There's a few issues with this--
1. No icon in system tray.
2. No access to latest version in software center.
I've looked around in the forums and tried to "whitelist" all apps--I don't know what that means and don't personally understand why ALL apps weren't whitelisted in the first place.That was unsuccessful.
I've just upgraded to xubuntu 11.04 and every thing seems to work fine and better than version 10. The only problem I have is that after some hour of working programs like vuze, amule, qbittorrent shuts down and disappears. if example: if I leave those software on for teh whole night the morning after they are closed and i have to restart them again
View 1 Replies View RelatedI am being tired of this old 3.6 firefox, want to upgrade to firefox 5. It is of course available at mozilla.org for my 64 bits suse, but i would like to know if a pre packaged .rpm exists somewhere ?
View 5 Replies View RelatedI wondering how to know the unpartitioned space on the HDD on Red Hat 5, for example if I have hda with size 30GB and I already had partation hda1 10GB that's mean that i have 20GB free unpartitioned space, Is there is any command that can shows me the free unpartitioned space on a specific hdd ?
View 6 Replies View RelatedI have a .png file and I didn't know which program I had to type to use it what could I do to find out?
View 8 Replies View RelatedIf someone has physical access to a machine, they can boot up with a live cd and chroot in to the filesystem as root. 1) Is there any way of a bash script script knowing if the computer was booted regularly or if it was chrooted into? 2) Is there a way to have a script run automatically when the user chroots in?
View 1 Replies View Relatedwhen in-core copy of inode is updated & after how much time it is updating? is there way to know all opened files on system by different processes?
View 1 Replies View Related