Upon boot, my resolution is smaller and running Classic. After I log out and login again, Unity is fixed, as is my resolution.Unity is already set up as the default session in dnmr and is being forced too.However the resolution change is making me think the proprietary NVIDIA driver isn't activated upon boot. Any other tricks I can try? GDM has given me many troubles in the past too.
View 2 Replies
Unity is not running when i log in, instead i am presented with the same 10.10 desktop: Applications, places, and system. I upgraded from the CD, because my internet connection is slow and it would take forever with the update manager. If it is important, i used the new upgrade option on the CD. my hardware is as follows:
pentium 4 cpu 3 GHZ
nvidia geforce 4 mx 4000
2 GB of ram
I have recently downloaded and installed Ubuntu 11.04 desktop. I'd like to be able to dual boot into Windows or Linux on my PC so I've installed in on an ext4 partition on a separate drive from Windows. The installation process ran smoothly and the dual boot functionality works as planned. The problem I'm having is that after logging in, the login window disappears (as does the options bar at the bottom of the screen), and then nothing else appears, just the mouse cursor (sometimes the loading icon, sometimes not) and an empty background image, no icons, no menus. It doesn't matter how long I leave it for, nothing ever happens from this point on. I am technical, however, unfortunately ,I'm very new to Linux (something I'd like to remedy) so I'm a bit stuck with what to try next.
View 9 Replies View RelatedSo I finally managed to install a copy of Natty on my old laptop, but when I logged in, the desktop was frozen. I could move my mouse, but I couldn't click anything. I didn't know if it had to do with packages not being up to date or something (though I doubt it is) so I ran sudo apt-get update, and then tried to run sudo apt-get upgrade, but I got an error saying "E: Unable to locate package upgrade". Apparently I'm not the first to have this problem. I found a similar question asked at [URL]... login. However, there was no answer. I thought that maybe an Ubuntu-specific forum would have an answer.
View 5 Replies View RelatedDecided to give Unity desktop a try this afternoon on my Maverick desktop - bad mistake. Found it very slow so I removed it. After that I restarted and all I get after logging in is a white screen.
I don't get an option at login to use KDE or anything else for that matter, so I'm hoping someone can give me some idea how I can rectify this.
Really don't want to wipe the install and start over because I don't have a separate home partition (think I've learned my lesson on that front) and there's a lot of stuff I need to keep on this machine.
I upgraded from 10.10, and there were no apparent problems during install. However, Unity doesn't start when I use the Ubuntu session from GDM. I have guake terminal installed, which starts correctly, so if I open that and run unity as a background process, everything works perfectly. I would like a solution other than adding it to my startup apps, because I still use GNOME every now and then.
View 4 Replies View RelatedI upgraded to Natty at the beginning of May and Unity has been working fine until about 4 days ago. Around then, then I cold boot and log in, Ubuntu starts in "Ubuntu Classic" desktop. If I log out then back in, Unity starts as expected.In both cases of my logging in, Ubuntu Classic is not selected - Ubuntu is, which should start the UI under Unity.
View 7 Replies View Related1. I didn't like the icon theme and changed it to Ubuntu Mono Light. But is there a way to get the Min/Max/Close buttons to how they are in Radiance when maximized, or is that dependant on something else?
2. Is there a way to disable the Unity dock, but not the Unity feature where the Min/Max/Close go into the command bar?
Just moved to Ubuntu 11.04 with unity and only have one problem...For most of my desktop needs I prefer to have the Unity Launcher up all the time (fullscreen apps don't cover it), and have set this option with ccsm.
However, when I watch mythtv, it is also under the launcher (and the top panel as well). How can I force mythtv to cover the launcher?
What I really need is a keyboard shortcut to hide the launcher, but the only shortcut is for "show launcher". (I guess the devs assumed everyone would want it hidden by default).
This, by the way is not my usual way for viewing mythtv. I have a projector attached to the desktop PC and it doesn't get a Unity Launcher by default (in Twinview), so no probs. However, occasionally I want to watch something on my computer screen, and that is when this issue arises.
I have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
View 1 Replies View RelatedI just finished installing 10.10 on my pc. the problem is that i cant login to the desktop i enter the password, the login sound plays and im stuck looking at the wallpaper. nothing else. i tried logging in safe mode and it worked. how can i get it to work normally?
pc specs:
Pentium 4 2.6 ghz
512mb ram
ati radeon 9600 graphics card
And i installed it using wubi.
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work.
basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?
I don't what happened but yesterday I was working normally and then I shutdown the computer, today when I opened ubuntu it took me to tyy1 login screen, I entered my username and password then it took me to the normal login screen with the login drums sound and it wrote on my account (logged in) so I clicked it and I entered my password again and then I got to my ubuntu so what went wrong and how to fix it also I noticed that a new terminal in system tools occurred called Kernel (I didn't add it)
I'm using ubuntu 10.10 on Dell inspiron 1520 with Nvidia 8600GT and 3GB RAM
Important: this happened after update to generic-headers-24
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies View RelatedI just updated to 10.10 (), but I have one problem. I changed my password a few days ago, and now whenever I log on, It comes up with the attached message, and I have to type in my OLD password to connect to wireless.
View 4 Replies View RelatedI installed xorg-edgers around the time the issue started, but I install and uninstall packages so often its hard to tell if this was the cause. Regardless, I ppa-purged the xorg-edgers ppa, reinstalled the proprietary nvidia drivers, and created a new user account, to no avail. I also wiped the /tmp directory, and reinstalled compiz, and tried dpkg-reconfigure -phigh xserver-xorg.
So far nothing has worked; I've checked out dmesg and /var/log/syslog, and nothing seems to be amiss, but admittedly I'm not sure what exactly to look for. I have a feeling its an issue with X being broken now, regardless of my attempts to downgrade, but I don't know how to go about correcting it.
I have a problem regarding the ubuntu enterprise cloud. I have installed CC,CLC,SC,NC and a client and logged into thje user interface using my browser for the first time with bith username and passwd as admin and downloaded the credentials.But now as I try to login with the same username and passwd, it says that its an invalid login. I understand we have to change the password on the first login but i don't remember doing the same.
I tried recover password option and gave the user name as admin and email address as my gmail id. It says that I have to follow the instructions sent to the mail, but there is no mail sent I have done it like 5 or 6 times with different mail ids
I'm seeing really bad user login format under a standard installation and am wondering why ubuntu does this as default. I have noticed that the graphical login for gnome sizes itself to accommodate a user's exact password length. This indicates to me that somewhere on the unencrypted part of a standard installation with user encryption contains at least some indication of the content of the password length which seems a security flaw even if not a complete hole, it majorly reduces the number of attempts a cracker would have to cycle through.
And that's assuming that *only* the length is contained. Furthermore it seems that it would be MUCH better to simply display the number of characters entered into the pw field and allowing the gui to expand itself from an fixed size as the field is filled out so the the user still receives visual feedback for entering characters. Either a simple character count display should be entered into the field or a 10 dot to new line so that one can visually quickly count the number enter by multiplying from a 10base graphical observation.
I have program that work like Fedora Firstboot it's run only one time after finish installation. I have two questions to ask.
1. How can I start this application before gdm start (login screen or auto login)
2. How can I start this application in fix display resolution (800x600)
My method now is
(This is a part of script , this script execute from /etc/init.d/myfirstboot , I create symlink to /etc/rc2.d/S1myfirstboot for start it before anything)
gdm-stop # first time I use /etc/init.d/gdm stop
DISPLAY=:1
export DISPLAY
/usr/bin/Xorg :1 &
[Code]...
I don't understand why first time firstboot start the system will auto loging in but not complete yet and then my script is start and it's work does not fine I think that is another user is already login , but if I re run my firstboot again and again (by setting something that can revoke my firstboot and restart) it's work before auto login and every things is ok!
I just installed 10.04, and its taking me to the console login, rather than the graphical login. When I tried the live cd, the graphical environment was good. But after installation, I dont get the graphical login , so that I can get into the desktop.
I have a ATI Mobility Radeon X1400 card on ThinkPad T60. Everything was working on 8.10, and I decided to install 10.04 and now it doesnt work.
I installed 10.04 on my pc. I also have 9.08 and XP installed. Both work. The 10.04 gui login screen displays and asks for the password. I enter the password. The screen goes blank but after a few seconds the gui login box re appears and again asks for a login. I rebooted into the TTY, created a new user, checked the new user was in in /etc/passwd and that I could get into the new user's account. When I rebooted into the gui the new user was there and I entered the password but again I just got back to the gui login window. The pc I am using is at least 5 years old. I have tried startx and I do get the gui background but no controls are displayed. I am using 32 bit 10.04. Using the TTY I have uploaded all the current fixes.
View 3 Replies View RelatedI'm hosting a server with Ubuntu 10.04. I've stumbled upon a strange problem.The server seems to refuse any login attempts, either with SSH or via a TTY after a reboot. After a couple of minutes (about 10 minutes or so) I able to login. The memory usage isn't high at login nor the system load. The auth.log doesn't show any login attempt before.problem? Or does anybody have a suggestion I could try to fix this?
View 2 Replies View RelatedIn the past twenty four hours or more, all of the following have failed at launchpad [URL],
a. Login with existing account,
b. Email instruction for forgotten password, both for institutional email and gmail.
c. Creation of new account, again both for institutional email and gmail.
I installed a bunch of updates this morning and am encountering the following problem since I restarted after that:
After I login, the screen will flicker once and then return to the login screen. I assumed that something must be wrong with my graphic settings (as so often). So I logged in via Ctrl+Alt+F3 and checked the xorg.conf and Xorg.0.log for erros. Everything seemed all fine. I also ran
Code:
sudo apt-get install --reinstall gdm && sudo dpkg-reconfigure gdm as recommended in this thread. Also no success. I ran "sudo service gdm restart". That showed me at first a dialog box saying that my graphics card and input device settings could not be detected. I then chose to have a new configuration for this hardware created. This only resulted in the screen flickering for longer when I logged in again and then returning to the login screen.
I was a user from China. I login Ubuntu 10.04 used gdm and kdm can't login. The login system just fash some times and go back to login sytem.
I can only use startx to login system.
And I see system Log, I find those log:
ul 22 23:02:04 owen-desktop gdm-session-worker[4623]: pam_unix(gdm:auth): conversation failed
Jul 22 23:02:04 owen-desktop gdm-session-worker[4623]: pam_unix(gdm:auth): auth could not identify password for [zou]
[Code].....
I didn't use Ubuntu for a long time for this issue.
I recently did a fresh install of Ubuntu 10.10 64-bit. After installing the ATI drivers, I had to tweak GRUB to get the nice splash screen back during boot. Then, I installed drivers for my TV Tuner (Hauppauge 2250). The card works fine. However, my boot now goes splash screen to a terminal login for around 10 sec where system messages also show up to the GUI Login screen. I was wondering if there was anyway to return to a normal boot.
View 3 Replies View Related
