Ubuntu :: Getting Programs From Fedora Install Discs
Jan 6, 2010
I am fairly new to ubuntu and linux in general but have bee experimenting for a little while. As part of that experimentation I ended up with a set of fedora 11 install cd's except for disc 4 which had a faulty image.The fedora cd's have some programs that may be handy in setting up a server. This prompts my thoughts to turn to getting the programs off the fedora cd's and installing them on ubuntu.Both are a gnome desktop environment, and there are a whole heap of files with names that look to me like files for part of a serious installation.
is it possible to use the ubuntu installer program to look at these and then install only some which I can't do if I just look at the filenames.
View 2 Replies
ADVERTISEMENT
Jul 1, 2010
I installed mysql on my fedora system via a tar download and install instructions. Its working fine.
I wanted to install mysql workbench which is rpm based and it reported that there were some dependencies one of which was mysql. I guess the rpm utility could not see the mysql prorgram since mysql as not installed via rpm mode.
I have 5 discs of the fedora 12 installation. Can someone let me know if the mysql rpm exists on one of these discs and how do I install ONLY the Mysql package on the fedora 12 system that I already have via rpm mode.
View 4 Replies
View Related
Jun 21, 2011
I have recently installed Ubuntu 11.04 on a Toshiba Satellite laptop that used to have Vista installed on it. I've been trying out various Linux live discs (eventually choosing Ubuntu) for over a year now, and whenever I've been on a live disc, the laptop has been able to connect wirelessly to the internet and browse the web. I have a NETGEAR router and I have always been given the option in the upper right to connect to NETGEAR. Tonight, when I installed Ubuntu, I chose to wipe the hard drive completely (I backed up stuff already), and it asked me if I had an internet connection. I tried to connect to NETGEAR but it wouldn't work. This made me a little suspicious, but I chugged along with the installation anyway. Now that it's fully installed, when I go up to see the list of wireless connections, it doesn't give me any options; everything is greyed out. What do I do now? I just wiped an entire hard drive and can't use the internet.
View 1 Replies
View Related
Nov 25, 2010
How can I install programs which are tar.gz ? I have seen many programs in tar.gz for linux .
View 3 Replies
View Related
Feb 20, 2010
Recently installed F12 through the text based install and have got to GNOME gui but when i got to system/administration i only get two options and those are for display changes. Is there some way to install the features i missed out on? namely Add/remove programs which i can't seem to find anywhere
View 3 Replies
View Related
Oct 21, 2009
How can we install programs other than using the terminal. To be honest, I liked this system and I got used to it, but the problem is someone who wants to use Fedora but has no idea on how to use the terminal, so is there any other way for installing programs?
View 8 Replies
View Related
Sep 3, 2010
Can anyone tell me if there any possibility to install all backtrack programs into my fedora 13 or not and how?
View 14 Replies
View Related
Dec 29, 2009
can open the programs pe-install, but can't open other programs or install new programs
View 4 Replies
View Related
Jun 21, 2011
I've recently got this error coming up when I try to install things via yum through the terminal. It happens when I try to install *anything* at all. I'm running 32bit Fedora 14, although my laptop is 64 bit.
I think the error may have occurred a while back when trying to upgrade to fedora 15 running 64 bit, although I'm not sure exactly what I did then
Quote:
I have tried running "rpm -Va --nofiles --nodigest" and I just get this error again.
View 6 Replies
View Related
Nov 20, 2009
i recently installed fedora on my eeepc1000hd and im having problems installing simple programs. for example i download limewire or flash player for ..... and when they download they open up in the archive manager instead of opening up witht the install client.
View 7 Replies
View Related
Jul 4, 2010
The normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies
View Related
Mar 30, 2010
I've been using ubuntu for quite some time, but just lately I burned a disc with brasero and my car doesn't read it, idk which is a good soft to create mp3 discs?? is there any that auto converts songs to mp3 if they are aac?
View 1 Replies
View Related
Dec 9, 2010
I have several old poweredge 2450 servers I bought recently, used. I have made several Ubuntu 8.04 or 8.04.4 server cds. They all hang on the packages.gz file trying to install. I used the check disc function on the 2450s and it can't read the file, it thinks it is corrupt, though it works fine on a more modern computer.have tried several similar computers. I have burned to CD-R and CD-RW. I have burned at 8x (slowest on my drive).I have checked the MD5. I just don't understand why these computers won't read this disc properly. Or several other discs, like SMS server or tiny core. Won't read them either. Oh, but it reads Ubuntu 10.10 server just fine, installs ok, well slowly, but it works.
View 1 Replies
View Related
Apr 12, 2011
I was just wondering why Ubuntu is always checking my discs for errors. This happens every few times i turn the computer off and back on. Maybe every 2 or 3 times. Is this just ubuntu checking the discs or something to worry about?
View 3 Replies
View Related
Jun 7, 2011
I am trying to install various software on my new laptop with 11.04, the problem is some software has 2 or more disks.
When I had 10.10, after I installed disk 1 I would right click and select unmount disk and then insert the second disk and select mount disk and it would install. Now I see on 11.04 there's no option and it doesn't matter how I install software, wine or not, it won't read the second disk.
View 1 Replies
View Related
May 20, 2010
Can Ubuntu 10.04 LTS play Blu-Ray HD Discs.
View 4 Replies
View Related
Mar 6, 2010
unable to mount cdrom0 mount: special device /dev/scd0 does not exist
I know the drive is hooked up via SATA.
It has worked before, and I have no idea why it isn;t working now. And I have made no BIOS changes since it worked once. The only change is I installed the newest kernal, that I can think of.
I ran accross someone asking someone with a similar problem to run:
ls /dev | grep cd
so I did and I get: andrew@andrew-desktop:~$ ls /dev | grep cd pktcdvd
View 2 Replies
View Related
May 18, 2010
I had used Discs cataloguing software on the Mac and Windows too, so I'm not new to the concept. However I'm a total rookie when it comes to Linux and Gnome Catalog
Once you have created a new catalog, and a disk inside it (I guess), how do you get Gnome Catalog to perform the actual scanning of the discs? I just don't see any button or menu command for it anywhere
View 1 Replies
View Related
Jun 12, 2010
I know, as of 2008, no support, but I'm wanting LTS so I'm trying to get Ubuntu 10. I'm trying to use 7.04,s CD/DVD creator to burn the Iso to a CD. I've tried desktop, and alternate, both by bittorrent, and every time I attempt to burn to a disc, it takes 10 minutes with useless spinning, saying "Preparing to write disc" and then it stops, locking the CD drive and having me to restart the system to get it running again. I've run on 2.0x, 1.0x, and 8.0x, all failing. I could really use help. I'm running a Dell Dimension 4500S, Pentium 4, 512MB ram, with a Cyberdrive CW058D CD-R/RW, SCSI, and IS a burner.
View 9 Replies
View Related
Apr 22, 2011
Installed Ubuntu 10.10 this morning from CD, downloaded all the latest updates. But when I put a CD or DVD in the drive, I can't access any of the data. Disk utility recognises that the drive is there, but it says "No medium detected".
Disk utility recognises it at /dev/sr0 so I added a line to fstab
/dev/sr0 /mnt/dvd udf,iso9660 user,noauto,exec 0 0
but made no difference
View 3 Replies
View Related
Oct 16, 2010
I have a problem with K9Copy's back up system it cannot seem to shrink a DVD9 down to 4.7gb to fit on a standard 4.7gb DVD Disk, how to correct this? As it renders K9copy totally pointless for me.
PS: This issue didn't exist on Ubuntu 10.04LTS
View 2 Replies
View Related
Jun 23, 2011
i was checking out some themes, and i found this theme that had tron life discs at the bottom displaying speed, temp, and mem. i followed the links to get those discs on my desktop but i dont kno how to do it.
View 7 Replies
View Related
Jan 28, 2010
The drive isn't reading discs. Dmesg says PIO255(auto-tune) requested, PIO4 selected, UDMA33MHz.
An inexpensive drive with many failures noted on Google.
What command would I enter in grub following "ro quiet" to change the mode?
View 5 Replies
View Related
May 26, 2011
I haven't used linux in a long time, and have to install OpenSUSE 11.3 on ten of our servers. What I plan to do is install OpenSUSE and all our required software on one of the servers, and then clone that drive to all the other server drives (the servers are hot swappable). My question is:
What do I need to worry about conflict wise? So far the only conflicts I can see that I will need to address are machine name (hostname) and set unique static IP addresses? How can I change the machine name (ie. server01, server02 ...) and IP address? Is there any other stuff I need to change as well?
We have a 2U file server running windows. All of the servers (1 x Win and 10 x linux) will be connected to a 24 port gigabit switch.
Is there also any special stuff I need to do to allow access to the Windows server (file etc)?
I will also require remote access to the servers, but assume that this will be easy to setup?
As for sleep mode, I assume that's fairly easy to configure through the interface?
View 9 Replies
View Related
Mar 5, 2010
I'm still running OpenSuse 10.2. The PC has three HDD's, all mounted, but at differing positions, and all formatted Ext3.I can see and examine all 3 discs OK. Some partitions seem to contain common folders.I have run into problems of "insufficient memory" reported, but the second and third discs are very little used, having very many GB free. The memory limit seems to be on the main Desktop, which is where various downloads end up.My questions are:-1. How/where should I mount the additional HDDs so that the PC can seamlessly use this spare disc space as memory?2. What should I do to tidy up the apparent duplicate folders presently seen on the additional HDDs ?3. How can I confidently identify which HDD is in fact the main OS disk ?I am sufficiently PC-literate to understand partitioning, but a bit unskilled still at finding my way through Suse Linux.
View 9 Replies
View Related
Jul 10, 2010
Setup of my server:
5 x 2TB samsung and WD discs.
1 x 1TB for operating system.
Mainboard DG45ID
I installed Debian Squeeze on the 1TB disc, everything goes fine. As soon as I attach the 2TB discs the computer boots and just says GRUB with a cursor. If I detach the 2TB discs everything is fine again?
View 2 Replies
View Related
Dec 15, 2010
Linux RED HAT 5
Liteon 18X DVD rom
I used Liteon dvd rom for installation, worked well but it dose not recognize all data DVD and all type of cd disks while in windows XP every thing was fine.
View 1 Replies
View Related
Dec 5, 2010
Does k3b require free hard drive space at the finalize media stage? I'm trying to write a 17.6 GB file to 25 GB media with 18 GB free space on the hard drive. My disc seems to write 100% then displays "Error". This is the debugging code:
Code:
Burned media
BD-R Sequential (SRM)
Devices
[Code]...
View 4 Replies
View Related
May 31, 2010
I'm having trouble with my optical drive (an LG GH22NP20).I can read a data DVD, but when I put in a standard audio CD it does not recognize it.I hear it spinning around in there, but if I check /media/ there are no files listed.?
View 4 Replies
View Related
May 3, 2011
I have two computers with SATA drives and burners installed, and when I try to burn a DVD or CD on either one it comes out corrupt. I have NO such problems on my older IDE drives. Is there a setting I'm missing? I'm getting sick and tired of making coasters.
View 3 Replies
View Related
