I'm a musician, and I want to get a home studio, and one of the things I require is the ability to plug my guitar into my computer. I know they make many guitar usb adapters but i don't know which ones work for linux.
can anyone point me in the right direction?
when I open Guitar Pro 5 in Wine (v1.1.40), there is no sound. I go into the audio settings to select Timidity, but it's not listed. I do have it installed and I can launch commands such as 'timidity anything.mid' to get it to play midi's, but other than that, it doesn't work. When I run Wine and launch Guitar Pro 5, I get this output:
Code:
ALSA lib conf.c:2700:(snd_config_hooks_call) Cannot open shared library libasound_module_conf_pulse.so
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
ALSA lib pcm_dmix.c:947:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
[code].....
Which program is best for tuning acoustic guitars, can you tell me if there is some program like guitar pro, or something like that.
View 4 Replies View RelatedI'm using audacity to record some songs and it works okay. However I use a Samson Go usb mic to pick up vocals and guitar, and i have a line out straight from my guitar. I can record from either by choosing which sound input I want to use in the Ubuntu sound preferences but I wanted to know if there was anyway I could select both and record both mic and jack simultaneously, is this possible??
View 2 Replies View RelatedI managed to patch myself a line in cable and never had problems with earlier versions of ubuntu but with 9.10 I'm having a problem with my soundblaster card and my speakers. I'm trying to record with ardour but I can't hear the click track because my guitar is playing back through my speakers and it's louder than everything else. I never had this problem with earlier ubuntu releases. I've tried finding a way to disable playback through the speakers so I can just turn the volume up on the amp and record and listen back on what I've recorded. There's an option in ardour audio setup do choose what playback I want but no option makes a difference. Where have the mic and line in volumes gone in 9.10? Is there a way of fixing this?
View 1 Replies View RelatedI'm looking into getting an ok microphone for guitar, song and speech, to use with Ubuntu. It's for hobby use, so I don't need the best microphone, just something that is good and will work in Ubuntu. Any recommendations? Should I get an USB one, or just a normal one and use my built in sound card?
View 1 Replies View RelatedI'm trying to install the demo version of Guitar Pro to see how it stacks up against TuxGuitar. I installed the .deb and also getlibs.At first try it complained that libportaudio2 wasn't installed so I installed it too. But when I try to run it I get: libportaudio.so.2: cannot open shared object file When I try getlibs ont he binary it says: No match for libportaudio.so.2
View 2 Replies View RelatedI noticed that any CPU load, while using Rakarrack guitar effects, causes the sound to distort and it generates loads of noise. This actually happens when using anything while running Jack audio. If I'm recording, I get tons of noise on the recorded track when I play it back (and live when monitoring) because any CPU usage seems to interfere with the signals. It even does it live in the playthrough (monnitor).
I realized it had to do with CPU usage when I noticed a pattern with the noise correlating to the plasma CPU monitor widget I had running originally. The noise refreshed when the monitor did. Since then, I noticed that anything that puts a slight load on the system will cause this disruption (even moving a window around, or anything in the background processes).
Anyone who is experienced with Jack audio, and possibly rakarrack as well, know the cause to this? I figured loading a low resource WM and eliminating unneeded processes can help but it doesn't since the recording program itself, while recording, is enough to cause this problem. (I know this because playing the guitar in Rakarrack, without recording and just using Jack to run the sound to the speakers, doesn't have constant noise but when recording, there is a constant noise)
I'm new to Linux, so I decided to try using Wubi to get started. THe problem is, when it finished installing 10.04, I got this message: OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.04-desktop-amd64.iso' Is there any way around this? It might just be that overly restrictive thing called Vista (which I have the bad luck to be using). I was considering getting a USB drive for Ubuntu anyway..
View 1 Replies View RelatedI recently got interested with with OS.. So I downloaded wubi in Ubuntu website. I opted for the Ubuntu Netbook Edition as am using a lappy. However, halfway through finishing download I got an error. The log shows:
OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.10-netbook-i386.iso'
What is the difference between the Ubuntu Installer for windows and the Ubuntu CD image? If I use the ubuntu installer for windows, does it have the capability to partition my drive, will it enable to share files with windows etc or is it just a way not to have to burn a CD. Just curious, the exact details of the installation files were not made clear on the website. Note: Windows Version: XP, 32bit, SP3. I have not partitioned anything yet.
View 2 Replies View RelatedI have windows 7 installed on Disk2 (according to windows Disk Manager), and I installed ubuntu 10.10 on Disk0, choosing the dual boot option at installation.
However, grub does not load (presumably because its on disk0 and my machine appears to boot from disk3), so the machine goes straight into windows 7.
How do I get ubuntu to load?
I'm currently running off of my live-cd, and after spending 4 hours of my life trying to fix this myself, i figured someone out here has to know how to help me. Basically, i wanted to try linux, then liked it enough to decide to put on one of my usb-drives (320g adata nobility NH92), and i couldn't get it to boot anything but windows w/o the live-cd, which would then boot the live-cd, lol, in other words, i couldn't get it to boot at all from the external, even though i had changed the setting in my bios to boot from usb first, and tried manually selecting boot from usb and all that fun stuff.
Sooo... eventually i decided it might be a problem with the bootloader, and while i'm not exactly sure at this point what i have done to my computer, all i can successfully boot is the live cd. When I try to boot w/o the live cd, whether i try to boot from my internal (windows) drive, or external, all i get is a device not found error.I think i could fix it if i had windows recovery cd's (i'm running xp, btw), or installation cds, but... unfortunately, they died in a terrible accident. So i have no cd's at all for windows. :/
I have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'
[Code]...
I'm wondering if this is even possible. I've searched high and low and have yet to find and answer to this particular setup.
The setup:
Router is in another building.
Desktop connected by WiFi
Laptop connected by WiFi
Both the Desktop and the Laptop are in the same building together. About 5' apart.
SSH server is setup on Desktop
FreeNX client is setup on Laptop
So they can connect just fine via WiFi for remote desktop control of the Desktop from the Laptop (so SSH and FreeNX are working).Is it possible to connect the 2 pc's directly to each other by Ethernet cable AND transfer files between them by Ethernet while still being connected to the Internet by WiFi on them both?Or would the WiFi have to be disabled while using the Ethernet connection?Neither has a Gigabit Ethernet NIC so I know it would at least require a crossover cable or another router to connect the 2 by Ethernet cable.The idea behind all this is to be able to transfer files between computers quickly by Ethernet while the computers are still busy doing other things on the Internet by WiFi.
I've been trying to find what would be the lightest ubuntu or ubuntu based distribution, I have an older PC I'd like to get up and running again, and would prefer something that works pretty quickly on it (for basic web browsing and other things) the specs are:
AMD Duron 900Mhz, 384MB RAM, 40GB HDD, Geforce FX 5200 128MB agp.
1. I accidentally wrecked a previous Ubuntu installation so I decided to re-install via the Ubuntu disk. Unfortunately Ubuntu doesn't let me override previous Ubuntu installations...
2. Ubuntu Maverick Meerkat is due to released in about 3 weeks. I want to install it via a clean install.
3. So can anyone tell me how to remove both Ubuntu partitions safely. I am currently running WinVista with Ubuntu Lucid Lynx. I know I have to use something like this to erase GRUB2. Can anyone give me a good tutorial?
I want to change from ubuntu 11.04 to ubuntu studio. Is there any way to do this without losing all my stuff/with out completely reinstalling the os?
View 7 Replies View RelatedThe scenario is as follows - I will be moving across the country and my desktop will stay here powered and online, while I move with a laptop. I need a way to connect to the desktop for file streaming(music and movies) as well as using the virtual machines. I have thought about SSH and VNC.I need something failsafe. That's priority one. I won't be around to fix it if it breaks. I can set the computer to come on in the BIOS at a certain time if the power went out. But if I can get in remotely the whole setup is useless.SSH only provides terminal use, correct? So if I chose that route I would be able to access the computer via command line and play music and movies with mplayer and such, correct? But I would not be able to run the virtual machines? Because there will be no GUI, right?
I have been playing with Vinagre and Vino through the host and guest of a virtual machine and I cannot get it to connect. Is there a better application? x11vnc? I have forwarded port 5900 on the router and have upnp enabled. Got a better remote desktop suggestion?I would like to run this setup headless.(no monitor) I also would like to run it without a gpu if that is possible to make it more energy efficient.Both computers are 64 bits and will be running Ubuntu 10.10 and soon 11.04.Are these crappy ideas to begin with? Should I go another route to get my files and access the virtual machines?
After a reinstall of 10.10, I am able to turn on file sharing and so I set up a shared folder.
Windows Vista can see this folder but in my network place, there is only one icon, and it's a "Windows Network" icon. Upon clicking on that, I can see the local network, "Rompus Room".
When I click on Rompus Room, nothing happens for a while, then I get a message saying, "Opening "ROMPUS ROOM". Then I get the final message, "Unable to mount location", followed by, "Failed to retieve share list from server"
Is windows 7 UAC basically a user/system control system like sudo?
View 7 Replies View RelatedI was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
[Code]...
So I wanted to replace my password prompt with this:it says to write it over the system files in ubuntu, under usr/share/gnome-screensaverbut i cant do that, as it says permissions are denied...
View 2 Replies View Relatedwhile installing ubuntu i made two partitions and set two load points. //home/but in ubuntu there is only one partition shown(filesystem).. what is going on?
View 5 Replies View Relatedwhen i login to Ubuntu all the icons & toolbars & taskbars are appearing in larger size.
my monitor size is 17" Samsung .
i dont understand how to solve the problem.
when i see on other systems its correctly detecting the monitor size and company.
but on my system its showing unknown for monitor company & the resolution 900 X 600 (16:10).
on my friend system the resolution is 1024 X 768(4:3). but on my system the max resolution is only 900 X 600 (16:10).
I'm about to install Ubuntu on two 250-gigabyte hard drives in a RAID 1 array, but I'm confused about how to partition my hard drives. How much space should I give to each partition? How many partitions should I create and where should I mount them? (I should mention that Ubuntu will be the only OS on this array.)
View 3 Replies View RelatedI am trying to install Ubuntu server edition on an old HP XT963 that recently came into my possession. I mainly just wanted to use it as a home file server and print server. I have been running ubuntu desktop on my laptop for a little under a year, but this is my first go at the server edition.
While ubuntu was installing it said "network autoconfiguration failed," I hit continue, thinking I could figure out how to configure it later. After lots of googling I still haven't figured out what exactly is wrong.
Code:
auto lo
iface lo inet loopack
after googling around I made it look like:
[Code]...
I would like to provide more information such as ifconfig and any other commands but I'm not exactly sure how I would do that without being able to copy/paste. I guess I would have the command dump the output to a file, but I'm not familiar with the -options this being my first time CLI-only.
I installed Ubuntu 9.10 and tomcat 6 java servlet container. I am trying to run the tomcat server on port 80, so I edited tomcat's configuration file (server.xml) and changed the default port from "8080" to "80". I launched tomcat server, went to my browser and entered:[url], but it says can not find server/location. Then I edit the server.xml and revert back to port "8080" and then enter: [url] and everything works fine. So my guess is some other service is taking up port 80, but I would think not, since I just installed Ubuntu and made sure apache isn't installed or running.
So I went to "System" --> "Administration", then choose "Network Tools". I then executed Netstat and did not see anything taking up port 80, but I do see port 8080 taken (assuming it is the tomcat server). Then I also did a Port Scan and entered my IP number. Again, I don't see port 80 taken, but do see 8080 being used.
I had a winxp laptop computer behind home wireless and was running tomcat 6 server fine with it, but it over-heated and died recently. So I got a used laptop and just installed Ubuntu 9.10. I have not changed my wireless router settings. It is the same as before. So I have ruled out my home's hardware/network equipment.
So here now I sit, wondering what is up?
For security reasons, is port 80 initially blocked by Ubuntu for some reason? Is there something I have to do beforehand to free up port 80?
Alright guys, I'm out of ideas...
I have a system here with three harddiscs, the first is a 500GB disc which is supposed to contain Windows 7, the second is a 250GB disc for Ubuntu 10.04 and the third is a 1TB drive which contains all my music, movies and stuff like that.
Now I installed Windows 7 first, then Ubuntu 10.04 onto the other disc.The thing is that the Ubuntu-Installer gave me the option of installing them side by side by shrinking the Windows Disc, which I don't want it to because I hate to clutter up ONE drive with more than one OS, So,after installing and rebooting into Ubuntu, I went to see if I could still start Windows 7, which I now can't.
Is there a way to have Windows 7 and Ubuntu 10.04 playing nicely together WITHOUT swapping the SATA ports or something like that?don't ask why i'm giving Ubuntu the smaller drive... I'm still a gamer, and my games need a lot of space.I just want to make a switch to Ubuntu for the times where I'm not playing any kind of Games.
By the way: Both Operating Systems where installed in 64-bit flavour.
A few days ago I ordered a UMTS USB-stick from Fonic and I received a Huawei model E1550. Win and Mac install files are on the stick, but nothing for Linux. I found for the USB Modeswitch "drivers" at www.draisberghof.de/usb_modeswitsch/ (nothing about the program source on the producers web page - strange), but the install gave me a lot of errors, and after a while, I decide to find another "approach". I think you might find this useful. This is my approach for Ubuntu 10.4 LTS. Open your terminal and type:
# sudo apt-get install udev-extras
and add a new udev rule:
# gksu gedit /etc/udev/rules.d/15-huawei-e1550.rules
In the pop-up window make the rule like this:
SUBSYSTEM=="usb",
SYSFS{idProduct}=="1446",
SYSFS{idVendor}=="12d1",
RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1 --product 0x1446 --type option-zerocd"
Save and close. To setup you mobile broadband connection go to System / Preferences / Network Connections, (or type in terminal ~$ nm-connection-editor) select the Mobile Broadband Tab, Add new and follow the assistent. The only changes I made, are the country of the provider, and the provider. (In my case Germany, Fonic) If you have to type in the settings yourself for Fonic, visit [URL] If the device is plugged, it will connect after a few seconds.