I installed Ubuntu this morning alongside Windows 7, but update-grub doesn't seem to be recognizing the Windows partitionI've attached bootinfoscript's RESULTS.txt, any ideas?
View 1 RepliesBackground: I dual boot Ubuntu 10.10 and Windows 7. I use an HP laptop.
So here's the deal. My Windows 7 partition got a virus a few weeks back. So, I removed the partition and replaced that partition with a squeaky clean version of Windows 7. Then, since Windows had installed, I could not get grub to work. So I booted up my disk and installed a third partition, which was a second Ubuntu partition, which I plan on deleting. I did this so I could get grub back. Now I have grub back but no Windows. I can mount Windows from both partitions. Then, I modified the /boot/grub/grub.cfg file to add windows. It showed up in grub but when I booted into it, it says "bootmgr not found." I also did an update on grub and that didn't work. I want to be able to boot into that windows partition.
I've previously installed ubuntu using wubi. But this is the first time I've tried installing it directly on the hard drive. I bought a new 320 gig hard disk and divided into 3 partitions of 50gig for windows 7, 30 gig for ubuntu and and the remaining for data. I installed windows 7 on the 50 gig partition. When I tried to install ubuntu using usb boot device, it says no operating system found and all my hard disk is muddled up and I can't see my partitions.
Now I go into live cd mode and see if I can mount my partitions and there I can see all the partitions. I formatted the 30 gig partition which was previously in NTFS to FAT32 and tried to install ubuntu directly from the live cd into the 30gig partition. But still the installer cannot see either my partitions nor my windows 7.As of now I'm using VMplayer and running ubuntu on a virtual machine. But would really prefer to have it installed on the hard drive to derive its full power.
I've set up a dual boot system with Debian and Windows 8, both installed on their own drive, with their own boot partition. I installed eveything in UEFI-Mode with fast- and secure boot turned off. Both installations are working, as I can access them by changing the boot priority in the Bios. What I cannot achieve is to let grub boot my windows installation.
This is the output of parted -l:
Code: Select allModel: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 512MB 511MB fat32 boot
2 512MB 111GB 111GB ext4
3 111GB 128GB 17,0GB linux-swap(v1)
[Code] ....
As you can see, my linux install is on sda, my windows install on sdc (sdb beeing a data disk). This is the entry I made in the 40_custom file in etc/grub.d:
Code: Select allmenuentry "Windows 8.1" {
insmod part_gpt
insmod chain
set root='(hd2,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
boot
}
I think this should be fine, but if I choose the windows entry wehen grub is booting, it says: error: no such partition. It's my first debian installation, and I am stuck here. Not too much of Linux experience in general.
I have installed windows after installing debian. Whenever, I start the system, I dont get debian instead I get only windows.
View 6 Replies View RelatedI've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies View RelatedI am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order:
sda1: Windows 7 (can't boot into)
sda8: ubuntu (gets erased)
sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
When i turn on my laptop the dell logo comes up, and then it goes to the Windows black "grub" (i have ubuntu and 7), if i click on "Windows 7" it starts, but if i click on "Ubuntu 11.04" it goes to the nice and purple grub that we all know, and i also have two options: Ubuntu or windows. It seems stupid and pointless to have 2 grubs.Is there any way to uninstall Window's black grub so the computer will go direct to Ubuntu's purple grub?
View 9 Replies View RelatedI am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedI deleted wrong kernel. how do I fix this ig Windows? I tried the terminal method from an Ubuntu live cd but it didnt work.
View 9 Replies View Relatedi installed Ubuntu Lucid on a partition on my machine which was formerly running windows XP on another partition. after a successfull installation, it happens i ubuntu loads at boot up without showing me GRUB to select my preferred partition or OS.
i have checked for menu.lst to set GRUB to load windows XP but i cant discover it only to read that Lucid uses GRUB 2 with different configurations.
i have windows xp on one disk, and installed ubuntu 9.1 on another disk. grub worked fine (it was an older version). i downloaded 10 must not have selected the right item, because i restarted as directed and ubuntu went to a shell. i tried several things but to no avail. i then reloaded 9.1 from my dvd and during installation it asked if i wanted to load 9.1 only(erase 10) on the disk. so i did that. it gave me some options for grub and obviously i selected the wrong one. grub comes up and will go to ubuntu and that works fine. if i select windows xp i get a blank screen with a blinking curser in the upper left for al long as i wait. the windows option on grub indicates the disk that it is on but nothing happens.
View 3 Replies View RelatedI have 6gb Ram. Bios is recognizing all of it. Ubuntu 9.10 i368 is only recognizing 2.5 of it. I am new to linux and have no idea what the problem might be. I have run hardinfo and it only sees 2 gb as well.
My specs:
NVIDIA 680i
intel core 2 quad extreme
6 gb corsair 800mhs (2x1 and 2x2)
Geforce 8800gts 320mb sli'ed with a 9800 with 1gb
Running Ubuntu 9.10 i368
i just downloaded Ubuntu 10.10 onto a USB key and am attempting to instsll it next to Windows XP. The Ubuntu install wizard has giot to the point where i have already chosen my language and asked it to install upgrades as well, when i click "Foward" it only displays two options:
1) Erase and use entire disk
2) Specify partition manually
It is supossed to give the option to "Install along side other operating systems". This option is not being shown -si what do i do?
I am trying to install a fresh install of Ubuntu 10.10, but I am finding it is not recognising my only HDD in the machine. It is working because I am running Windows 7 x64 on it.
Here are my machine specs:
CPU: AMD Athlon 64 X2 5600+
Motherboard: XFX MI-A78U-8309 GeForce 8300
Graphics Card: NVIDIA GeForce 8300 + 8400
HDD: WDC WD5001AALS-00L3B2 ATA (~415GB)
The installation knows when my IDE drive is plugged in, but I want to install the boot sector in the WDC drive.
WUBI also fails to install on this current drive, though can setup the boot sector OK.
i installed ubuntu 9.10 for the third time on my lenovo s10e running windows xp. my first two installs went good until ubuntu tried to update gnome to the latest version and my computer went to sh grub on reboot, so on my third install of ubuntu 9.10 using wubi i turned off updates and the computer was working wonderfully for weeks until i let my netbook battery die.then the dreaded sh grub on reboot. i really like ubuntu and prefer to use it over xp.
View 2 Replies View RelatedMy laptop got broken so I extracted my hard drive to use as an external. The problem is the computer I am using has windows xp on it and my external has also a windows xp, ubuntu and kubuntu. I need to have the xp from my external running because i use it for .net development. How I can have 2 windows on grub with root (h0,0) and (h1,0). My ubuntu is (h1,6) and kubuntu is (h1,3).
View 2 Replies View Related