Ubuntu :: Error : After Installing Linux-kernel-pae And Binaries
Dec 11, 2010
I read in some website and thought of giving a shot at the pae enabled kernel as i was having 6GB of RAM available in my system. I couldn't use 64bit system because i have a lot of applications that are not available in 64bit. I use a few customised software (From my office corporate) they are 32bit too.
Here is what i did..
sudo install linux-generic-pae
It installed a few headers and packages additionally required.
and i did a reboot.
[Code]...
An alternate solution to use all the 6GB is also welcome... using the current pae enabled kernel. do i need to install any additiona drivers..While i try to load Xwindows.. I get the following error.A long error report is generated and at the end "No Xwindows system installed.."
View 4 Replies
ADVERTISEMENT
Mar 3, 2011
My kernel is not updating and I'm getting errors like.........
[Code]...
View 6 Replies
View Related
Sep 6, 2010
Currently I am installing oracle 10g release 2 with Red hat Linux 4.I am getting the following error.
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'. In forum I saw this kind of post and I did all the steps, then also getting the error.
View 1 Replies
View Related
Jul 13, 2011
Ive looked and ive seen many tuts on how to do this but ive never seen a specific answer to my problem.
Specs:
-Kubuntu 11.04
Problem: every time i use KPackageKit to try to install something it always tries to install sun-java6-bin which is already installed. ive added repositories, ive used restricted-extras, ive done the update and installs in terminal. java works fine for me in the browser and for terminal commands. i have set sun-java6 as the default java and updated it again. the error code is: Code:
subprocess installed post-installation script returned error exit status 2. i dont know what to do. all my installations fail. and i cant do anything. i hope ive provided ample information.
View 1 Replies
View Related
Jun 13, 2011
I need to debug "ls". I downloaded coreutils and compiled them in debug mode."ls" uses readdir() kernel API to fetch files/directories from a file system. readdir() fetch data from any file system (suppose FAT or ext3).I have debug version of FAT/ext3 and installed, I also have debug version of coreutils (ls) as well.Now I want to debug from "ls" to "FAT/ext3 readdir()".How to do that?
View 6 Replies
View Related
Jun 14, 2010
I am using Ubuntu minimum 9.10 and I would need to add a network driver. I was told that it is the safest way to rebuild the kernel that includes this driver. I built the kernel and loaded it to my Ubuntu minimal. The network now works. However, during bootup time, I got the following error messages.
[Code]...
1. Can Linux gurus tell me what they are?
2. Also, I use bootchart to check the performance, somehow, in the first 5-6 seconds, nothing happens. I would assume that there is a time-out, but I do not know what is happening.
3. Ubuntu minimum uses kernel 2.6.31.22, and I use a later version, 2.6.33.5. Should I use 2.6.31.22 or 2.6.33.5?
View 7 Replies
View Related
Jun 15, 2010
I have recompiled a few kernels, but all on 32bit systems so not sure if that has anything to do with it.
Running Arch Linux 64bit, most recent version.
Kernel Output:
Code:
My first thoughts was that it might be my grub bootloader configuration, so had a big play around with that but it didn't fix it. Also made sure support was built for filesystems. However almost all that Fstab mounts are ext3 anyway, and certainly the root and /boot are. Now thinking it may be a memory error so will run a check when I shutdown.
View 3 Replies
View Related
Mar 31, 2010
it said the kernal requires an X86-64 CPU, but i only have a i686 CPU. what do i need to do to get the appropriate kernel. i am using windows xp now and want to move to linux. do i just need to try ubuntu or can i do something to change mine in windows now to go ahead and upload Zorin
View 1 Replies
View Related
Jan 26, 2010
I have installed CENTOS 5 yesterday.uname -aLinux germany.site 2.6.18-164.11.1.el5xen #1 SMP Wed Jan 20 08:53:10 EST 2010 i686 i686 i386 GNU/Linux uname -r2.6.18-164.11.1.el5xenBut when installing Oracleasm and OCFS2 packages I get the following errorrpm -ivh oracleasm-2.6.18-164.el5xen-2.0.5-1.el5.i686.rpmwarning: oracleasm-2.6.18-164.el5xen-2.0.5-1.el5.i686.rpm: Header V3 DSA signature : NO KEY, key id 1e5e0159error : Failed Dependencies : kernel-xen = 2.6.18-164.el5 is needed by oracleasm-2.6.18-164.el5xen-2.0.5-1.el5.i686While installing OCFS2 I get the same error.
rpm -ivh ocfs2-2.6.18-164.el5xen-1.4.4-1.el5.i686.rpmwarning: ocfs2-2.6.18-164.el5xen-1.4.4-1.el5.i686.rpm : Header V3 DSA signature : NO KEY, key id 1e5e0159error : Failed Dependencies : kernel-xen = 2.6.18-164.el5 is needed by ocfs2-2.6.18-164.el5xen-1.4.4-1.el5.i686.rpmThis shows kernel-xen is needed. But I have already installed this kernel-xen package.rpm -q kernel-xenkernel-xen-2.6.18-164.el5.plusHow to resolve this problem ? I needed these ocfs2 and oracleasm for some oracle features.
View 2 Replies
View Related
Nov 19, 2010
i was not able to install alsa...showing the error checking for directory with kernel source... Please install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.18-194.el5xen/source). my friends installed the alsa for cent os 5.4...how to rectify this...
View 3 Replies
View Related
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source
View 13 Replies
View Related
Dec 10, 2010
I am actually running Linux Mint 10 64-bit, which should be essentially identical to Ubuntu 10.10.
When I attempt to execute a Linux binary file that I have downloaded from the internet, I get the error "No such file or directory." I have eliminated all sources of user error as explanations: I am in the correct directory; 'ls' displays the file in question as present. I am prefixing the command with './' The permissions on the files are correct and they are marked as executable
The specific cases where I have problems are with the Mathematica Player freeware program from Wolfram, the Foldit protein folding game, and the XPP-Aut dynamical system program. I have used the Foldit and XPP-Aut binaries previously on other Linux distros, including Ubuntu, so I don't believe there is any problem with the files themselves.
why Mint can't execute these binaries?
View 3 Replies
View Related
Jul 23, 2009
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies
View Related
Sep 1, 2011
I have the newest version of opensuse dual booting on my computer because I will be writing and running some molecular simulation programs this year on a computer cluster at the university and the computers on the cluster are using eclipse and opensuse so I wanted to have these set up at home so I could work at home a bit.
Anyway, I downloaded the eclipse indigo IDE for c/c++ for linux of the eclipse website and extracted it to my home/user directory. Whenever I try to run a program in eclipse I get a "Binaries not found" error. I installed the c/c++ development tools in Yast and also installed gcc and make thru zypper in the terminal. What is causing this problem? I've looked on forums and tried to fix this for the last couple days and I feel like i've tried everything.
View 2 Replies
View Related
Oct 4, 2010
I'm trying to install a driver for a Jetway ADPE4S Daughterboard on Ubuntu 10.04 but coming up against some problems. When I use 'make', I get this error: make ARCH=x86_64 CC=cc LD=ld CROSS_COMPILE= V= -C /usr/src/linux-source-2.6.32 M=`pwd` modules make[1]: Entering directory `/usr/src/linux-source-2.6.32'
ERROR: Kernel configuration is invalid. include/linux/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. make[1]: *** No rule to make target `code'. Stop. make[1]: Leaving directory `/usr/src/linux-source-2.6.32' make: *** [all] Error 2
Not knowing what to do, I've been playing around with it, and copied the files autoconf.h and auto.conf from a folder '/usr/src/linux-headers-2.6.32-25-generic', but that didn't help, it still says "No rule to make target `code'. Stop."
View 9 Replies
View Related
Apr 24, 2011
Other than the linux kernel image I am using is it ok to remove the others I have and thus gain more disk space ? I only have a small asus 900 netbook.
View 4 Replies
View Related
Jan 30, 2011
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
View 7 Replies
View Related
Mar 22, 2010
I have installed windows xp (service pack 2) on my pc. later i formatted a partition (drive E and installed ubuntu linux 8.04. I have provided 2gb space for SWAP partition and remaining for root (/).I have done this manually. Installation was completed, and ubuntu asked me to reboot the system. I did so.
Now comes my problem. I am getting some DHCP connection or some thing weird. after that i am getting a message ......and with a message asking me to press any key. the same thing is coming even after restarting the system....i am unable to see both windows and linux now!
View 5 Replies
View Related
Dec 16, 2009
Update manager downloaded and installed latest kernel (Ubuntu, Linux 2.6.31 -16 -generic). When I tried to restart I get the message { 1.661235}Kernel panic - not syncing: VFS: unable to mount root fs on unknown - block(8,38). Everything works fine on previous update.
View 1 Replies
View Related
Oct 24, 2010
If the moderators permit (because it's a security issue), the security vulnerability was shown in the ubuntu 10.04(64 bits) first by VSR, a security research firm. Now kindly view the link i will give and suggest what to do! I have the same version ,but the 32 bits(Intel).
View 2 Replies
View Related
Feb 22, 2009
I have the DVD installer of Fedora 10, i want to dual boot with windows vista. well i get up to the partitioning part of installation (in anconda) and it asks me how i want to partition it... i wanted to re size my partition and create the default format, so i keyd in 70GB and Okay. then it came up with an error, saying I had bad sector(s) The error told me to run chkdsk /f /r in windows, then i could run ntfsresize with -b, (in Linux) well i did all those steps, and shrunk /dev/sda1 to 70gb (/dev/sda2 is my recovery partition) i have a 140 gb hard drive, but can't find the unallocated space anywhere!
when i booted windows, it ran a chksdk, like it should, and in my computer it said that it had been shrunk (because the pie graph showed a capacity of around 70GB) When i go into windows disk management it says no unallocated space, just one big partition (and a 8gb recovery partition) this is the same with GParted on puppy linux, GParted on fedora 10 (live cd) says there is no drives I can mount or unmount and same error on partition logic... in EASUS partition manager i get told that there is no unallocated space, in the fedora installer there is only /dev/sda1 and /dev/sda2. Does anybody know.. how to install fedora on this partition, or get rid of the partition and repartition it another way. when i click on the option to remove all linux partitions and create default format, it errors and says it cannot make another primary partition, then says there is no room for /boot. and i can not proceed.
View 1 Replies
View Related
Jul 20, 2010
I have recently been getting into kernel development and was wondering whether the Linux kernel or BSD kernel would be easiest for newbies (such as myself). Does anyone know? I am really considering BSD because it seems to me to have the best documentation.
View 2 Replies
View Related
Nov 16, 2010
i got an error this kernel requires an x86-64 CPU,but only detected an i686 CPU� while installing fedora12 in virtual machine..........
View 2 Replies
View Related
Mar 27, 2010
Is there a way to install and run i386 software packages inside an AMD64 version of Xubuntu (v9.10)? Just to get an idea, how much effort would it require to port it to something usable within the said OS. I imagine it would be a lot.
View 2 Replies
View Related
Oct 31, 2010
I've tried ubuntu, and could never get my sound working with that, so I tried fedora and had the exact same problem there. After a few days of trying to figure it out I decided to give up because it was really getting ridiculous, and I just want to go back to windows where things simply work.
Now the problem is that when I boot from the windows XP install disc, it doesnt recognise anything on my harddrive and just gives me the blue screen when I press any key (after showing me the list of partitions on my harddrive, all of which are <UNKNOWN>). I'm not sure what the problem is but it must be something to do with the fact that I have linux installed, so is there any way I can completely remove Fedora and just start fresh with XP?The only 2 options that the XP install disc gives me are 1) Install windows XP (I get blue screen), or 2) Recover windows XP installation (I dont have xp installed anyway).
Likewise, booting from my Fedora install disc only gives me the options of installing or rescuing Fedora, but not the option of removing it.
View 3 Replies
View Related
Oct 5, 2010
I have a problem installing the arm-linux-gcc in arm mini2440. The steps that follow are: Unzip the file with the following order: # Tar xfzv arm-linux-gcc-4.3.2.tgz-C /Included in the PATH HOST development tools:# Export PATH = / usr/local/arm/4.3.2/bin: $ PATH # Arm-linux-gcc-o hello hello.c And I get the following error:"/ Usr/local/arm/4.3.2/bin/arm-linux-gcc: line 1: syntax error:"("unexpected"
View 1 Replies
View Related
Feb 10, 2011
I am new to kernel development,and I have to compile a kernel with some specific features and then install it on some machines.The problem is that these machines are slow,and hence I want to compile them on a fast desktop once and then install them on the machines.I am following this guide from Ubuntu wiki.
So what I plan to do is, download the source and generate a config file on one of the slow machines, copy both to the faster machine, generate the image on the faster machine and then install it on all the slow machines. The slow machines are almost identical (same cards, processors, OS etc.) but different from the fast machine(different OS and processor). So will this work or not?
View 2 Replies
View Related
May 6, 2011
I've compiled the last stable ubuntu kernel (2.6.38-...) following this guide: How to compile a Ubuntu 10.10 kernel but in this guide doesn't explain how create linux-libc-dev package for that kernel? How do I do?
I've tried with fakeroot debian/rules binary-arch-headers but it returns an, IMHO, absurd error:
mkdir /home/simon/sources/kernel/ubuntu-natty/debian/linux-libc-dev/usr/include/
mkdir: cannot create directory `/home/simon/sources/kernel/ubuntu-natty/debian/linux-libc-dev/usr/include/': File exists
make: *** [install-arch-headers] Error 1
The error is correct but this folder is created in the same process!
View 1 Replies
View Related
Jan 29, 2011
Durring attempts to install Haguichi, Terminal says "Version of libmono-system2.0-cil on system is 1.9.1+dfsg-6." I have used "sudo apt-get -i libmono-system2.0-cil" only to be told during that install that I "have the latest version alread installed." Do I need to uninstall 1.9.1+dfsg-6 ?
View 4 Replies
View Related
Mar 21, 2011
I have an older laptop (hp pavilion dv1000), specs are:
Intel Pentium M 1.5 GHz
512mb RAM
60gb HD
Before attempting the below, I had XP installed on it, and it ran without issues, other than being a little slow.I'm looking to install a linux distro, but I've had a ridiculous amount of issues so far. Currently, there isn't anything installed on the machine. I've tried (booting via cd iso's):
1. Ubuntu 10.04.2-desktop-i386: Got to splash screen, then black screen. Never got to iso boot menu.
2. XUbuntu-10.04.2-desktop-i386: Got to splash screen, then boot menu. Chose the install option, and it went to a black screen. Nothing else happened.
3. openSUSE-11.4-KDE-LiveCD-i686: Installed all the way, except the graphics didn't behave correctly, the whole thing was glitchy and problematic, I decided to move on.
4. XUbuntu-10.04.2-alternate-i386: After a seemingly perfect installation, upon reboot I get this...
"The disk drive is not ready yet /dev/mapper/crystswap is not ready yet or not present", then gives me the option to wait or do a recovery. I tried waiting, it boots to a black screen. I tried the recovery, and now it doesn't boot at all.
Anyone have any good recommendations for a linux distro that should work out of the box with this laptop? I'd like to install NetBeans, firefox, and etc, so nothing too basic. Just something that will run quickly given my specs.
View 7 Replies
View Related
