How do I do that ? Currently I have Kubuntu/Mint KDE installed as my main and only OS so the GRUB splash is disabled by default, how do I enable that (so I'm able to change the boot commands to go to single user mode).?
View 2 RepliesIf I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedI noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
i wanted to fix splash screen, to be in 1680x1050 resulution, so i've found this: [URL].... After restart i don't have Ubuntu, with Linux 2.6.35-22-generic, just Ubuntu, with Linux 2.6.35-22-generic (recovery mode) My grub.cfg
[code]....
I installed Fedora on a separate partition and during the install prompts forgot to uncheck the Grub installation. So, Fedora installed with Grub 1 (imagine that) although I was able to find instructions to upgrade it to Grub 2 (plus it recognized all the OS on the computer). So far so good, I don't have a preference whether Fedora's or Ubuntu's Grub is installed, however the Ubuntu Startup Splash screen is messed up, ie. a simple purple background with "Ubuntu" in system fonts. Is there a way to fix this back to the graceful default splash screen? Can I change back the Grub to be Ubuntu's?
View 4 Replies View RelatedWhen does the grub-pc splash screen disappear?
On my computer it is displayed until "Loading, please wait" appears i.e. after both initrd.img and the kernel are loaded.
A yes and no answer is enough.
I have installed backtrack4 on my laptop with windows7, and installed grub2.I am having a problem on showing a splash screen.I don't have a splash screen that shows neither on grub2 nor grub legacy.I have searched too many tutorials, but I don't know what's the problem, because all of them shows how to change the splash image, but don't mention anything about enabling it.Note that the live cd loads an image.So I don't think it's my vga or something.
View 3 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedCan someone help me with enabling the user login screen on boot up please
View 5 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
I have failed to install kUbuntu for a several days already, so I am currently on SuSE (hate it, love ubuntu...). I don't know what is wrong with my PC, but something ain't right. I tried:1st: Installing kUbuntu x64 - Result: Freeze on loading screen (I think..don't even remember anymore ).2nd: Running Live CD ("Try Kubuntu") - Freeze on splash screen, at the Hard Disc icon (can't get past that one).3rd: Installing Ubuntu x64 with Unetbootin - (GNOME variant). - I get a nice graphic card error, can't unerstand anything - screen messed up.4th: Installing Ubuntu x86 with Unetbootin (GNOME) - same as 3rd time.5th: Decided that maybe something was wrong with the download. Downloaded kUbuntu via torrent. Installed with Unetbootin in a flash - no change.6th: Installed SuSE7th: Downloaded kUbuntu x86, burnt, tried installing, back to 1st step.Is this an infinite loop ?Hardware specs:
250GB x 2 Seagate Barracuda ( I had them connected in a RAID0 via bios previously(Windows 7), had trouble installing suse because of this, but I deleted RAID information and disabled raid in BIOS setup )GeForce 9800 GX2Quad 2 Core 2.664 GB unbuffered ram ( 4 x 1 GB)
I can not get ubuntu to install on my workstation. I have the 64-bit cd (am currently trying the 32-bit cd with similar results) and it won't install. I get to the ubuntu splash screen with the 5 dots underneath it and it looks like it's trying to run for several minutes. After the several minutes, the screen simply goes black and I can't do anything.
View 8 Replies View RelatedI want to change the image that is presented to the user when i choose operating system on startup eg back.jpg i have looked at tutorials and no luck
i am running gnome on 11.3.
how to change the boot splash screen in Ubuntu (it's using xsplash) but since openSUSE is most likely a bit different, i would like to find out how i can change it here, on openSUSE 11.2
View 1 Replies View RelatedI have never been able to see the splash screen, something that I'd like. I have checked the options on the bootloader and it says "splash=silent" (that's disabled?). I found it confusing, because the ubuntu kernel boots with "splash" but when I try that option on OpenSuSE 11.2 it doesn't.Also when I shut down the laptop the screen goes crazy, only the two top cms shows "something" which are blinking and crazy green and white console words moving from one place to another so fast I can't even been able to read what it actually says.Either way, the laptop shuts down without any problem (?). I think is the normal shutdown process (without splash) but it's a bit perturbing. I've had had a couple of kind of "aesthetics" issues, but far from critical. My overall experience with OpenSuSE after 4 or 5 years being "debianized" have been very nice .
View 3 Replies View RelatedNew install on Compaq Presario F700 (F756NR)The install went fine. I was able to get the Nvidia drivers working too. The problem I have is when the system boots. I get the OpenSuse splash screen, and the system just hangs.I found that if I press <Esc> and hit <Enter> a few times, the system will eventually boot. I also found if I wiggle the mouse during the splash screen, the progress bar will begin to move, and the system will boot.Seems to be something about detecting hardware during the boot phase, and it seems to be input related.
My Computer
Folders, Harddisks, Removable Devices, System Information and more...
Disk Information
[code]....
I keep getting kicked to the splash screen when i try to install programs from CDs. i get the same problem when i try to run xvidtune.
any ideas how to fix this?
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies View RelatedHowever, I've been trying to get a splash screen up, and it doesn't work.This is the splash screen I want to use: http://gnome-look.org/content/show.p...?content=79783
I've tried to install Usplash, but the package was broken.I tried to install it via Softpedia, but it was missing the artwork .so.I've also tried to install SplashY, but it is also a broken package! How can I install this splash screen?
I just installed SUSE 11.2 from a downloaded DVD The installation went correctly but now I boot up the computer and when the login screen appears there will be no box highlighting a user or even a blank box to input user. The restart, suspend and shutdown buttons are not operational. However, if I power down the computer manually and restart the login screen comes up normally.
View 2 Replies View RelatedI am an old linux user (debian,suse and ubuntu) and i installed now fedora on my box to learn something new about other distros.
Fedora 12 is realy nice, but i got some questions about some things.
I installed the nvidia kmod on this way:
Code:
I inserted this in my grub.conf in etc on the kernel line at the end-> rdblacklist=nouveau after install nvidia kmod package no more splash screen while bootup
Code:
This is what happens if i reboot my pc: i see grub then i start or select fedora12 booting i see for a moment some text then i see only a blackscreen and the bottom of the screen a blue horizontal line with the loading status for the fedora x server gnome. if the line is full, gnome apears.
I would like to have no splash screen and to see the console debug output
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies View RelatedI've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies View RelatedOut of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.