The server kicked me out because Dolphin opens many many connections wile browsing through the servers filesystem with dolphin. i have to wait several minutes to be able to upload files after the limit reached. i am using kubuntu 10.04
View 1 RepliesI downloaded Slackware64-current to give it a try on my laptop and all went well as usual. However when trying to connect to another computer from Dolphin via sftp I was informed that sftp is an 'invalid protocol'. I can use ftp, though. Same thing happens with Konqueror. Using Konsole I can successfully start sftp, although that is not exactly what I want or need. For me, this is really a major problem as my office computer can only be accessed at home via secure shell. I need to be able to upload/download files and folders from there and from other machines. I wasn't really aware of how heavily I depend on this until now. Has anyone else run into this problem? If so, is there a fix or a workaround?
View 3 Replies View RelatedI really hope someone could help me with this problem. I've been stuck on this for a month.I am using the sftp command to upload files using a bash script.The problem is that it is extremely slow to do it this way. as many of you would know if you have shared server somewhere. I would use scp if remote server supported it, but it doesn't.
Anyway, If any of you have ever used FileZilla, in the Settings, if you go to "Transfers" there is a place where you can set the number of "maximum simultaneous transfers". This feature works wonders with SFTP (and FTP too). It really speeds things up. How do I accomplish this same thing with the sftp command... because I don't want to use a GUI. I don't even mind using FileZilla through the command line if possible... but it does not seem to be possible. I've been stuck on this for a month!!! I've searched everywhere and tried a lot of things with no avail...
I want to use a cron job to backup my files to my server. Now when I run the script manually, I get an error when backing up (something and sftp file being used or so). I only get this when I'm simultaneously connected to my server with sftp. So to be sure that this doesnt happen when I wont be there anymore to look at the log, I would like to know if there is a command to kill all sftp connections. I would put this command in the backup scrip cron uses.
View 4 Replies View Relatedif i want user should`t have more than 20 sftp connections to a server,is there any way we can limit no.of connections to a particular user on the server using ssh configuration
View 7 Replies View Relatedi have a vsftpd server running well but i want to make/force all users to use sftp and not just ftp is this possible?
View 1 Replies View Relatedhave a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedAs a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies View RelatedIs it fair to say that connLimit and hashlimit are very similiar on Linux i.e. while hashlimit caters to limits for groups of ports, they both set the connection rate limit per host? How in IPTables, do I configure a policy that limits connections on a port that encapsulates the total sum of all connections from all hosts? i.e. I do not want to allow more than 6000conn/minute for port range that is the sum of all connecting hosts?
View 3 Replies View RelatedI recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI have ubuntu server 9.10 running in which I selected the option to automatically installed security updates. It's been running file for 4 months with both ssh and SFTP, which I installed the openssh-server.Today I really need to upload something to the server, which is in another city and SFTP isn't working. It's not allowing me to connected, I tried connecting with multiple FTP clients, command line...etc and on both windows and linux and SFTP just isn't working.The only changed I've done to the configuration file was changing the port from 22 to another port and did this 4 months ago. Been using it every few weeks since then.
View 1 Replies View RelatedWeird problem; I have set up SSH on my 10.04 server. I can putty to it over my LAN from my Win 7 box but when I try to SFTP I get "connection timed out".
View 2 Replies View RelatedWhen would ftp be a better choice than sftp?
View 1 Replies View RelatedI have configured the sftp in ubuntu 9.10, I could able to connect through the port 22, but not connected to users home folder. where do I need to configure so that users can connect / restrict to only their folder
View 1 Replies View RelatedI've made an SSH server using OpenSSH on my desktop Ubuntu (10.4) for tunneling. However, I'm noticing that the public account I made for my SSH (one to give to friends to use proxy) has SFTP access to crucial system files. I'm okay with SFTP being enabled on my account, but not on this public account. Does anyone know of anyway to either disable SFTP to that user, or restrict access to important files?
View 4 Replies View RelatedSince installing upgrades including KDE4.4 and having to reinstall plasma-desktop, when I launch Dolphin file manager via alt-f2 it always crashes. In the status at the bottom is reads...
" The process for the file protocol died unexpectedly. "
When I run Dolphin as my current logged in user there are no issues.
I am new to ubuntu and I have been having problems downloading the dolphin gamecube and wii emulator when I downloaded it I got a binary file but I have no clue how to install it.
View 1 Replies View RelatedI'm a recent user of Dolphin in Kubuntu. I use the split-view mode. I'd like to navigate back and forth between the two main windows with a simple keyboard action such as TAB, i.e. tabbing back and forth as I copy files from one directory to another. How could I set that up? I looked under Dolphin shortcuts but wasn't able to configure this action.
View 4 Replies View RelatedJust yesterday I did a fresh install on my aspire one of ubuntu 11.04. It then installed konqueror and (apperently at the same time dolphin). Now I did allot of googling and now it works to a level that if i press home folder in my unity bar it opens in Dolphin.Nice But the most important thing still doesnt work, that is if I want to save a document from libreoffice or pdf or what ever program it still opens a window of nautilus. I need it to be a window of dolphin because nautilus doesnt understand the networkdirs you can make with dolphin. (makeing a nautilus network dir doesnt work).
View 1 Replies View RelatedI'm writing a file handler script that monitors (via a cron job) a directory that is an openssh sftp target for new files. When it detects a new file, it moves it, does an scp to another system, and sends an email. The problem I have is that I can't figure out a way to verify that the sftp upload is complete before I start manipulating the file.
View 1 Replies View RelatedI'm trying to establish a connection between two laptops using sftp but am getting the following error message:
Connecting to <IP>...
ssh: connect to host <IP> port 22: Connection refused
Couldn't read packet: Connection reset by peer
ftp isn't working either. Both machines are running Ubuntu and connect to the internet through the same wifi router in case that's relevant. What could be the problem?
I'm using Ubuntu Server 10.04 and I'm also using OpenSSH 5.3. I have SFTP-only users in a chrooted environment. Users are able to login, change directories, upload and download files, but as soon they attempt to give the 'ls' or any list directory. the server disconnects.
View 1 Replies View RelatedI can't connect to sourceforge with SFTP from filezilla. I'm using the correct username [URL].. and password (Same one as allows me to login to web administration) so why do I keep getting "Authentication failed; Critical error"
View 2 Replies View RelatedI'm using Filezilla to connect to a remote server with site 2 site VPN. Even when i'm sending a small file with SFTP, the connection time outs and reconnects. Its happening again and again. Even SCP connection is also the same. BUT SSH CONNECTION IS WORKING FINE.
Filezilla log
ravindika@ravindika:~$ tail -f filezilla.log
2010-07-07 10:35:12 2690 2 Response: fzSftp started
2010-07-07 10:35:12 2690 2 Command: open "root@XXX.XXX.XXX.XXX" 22
2010-07-07 10:35:19 2690 2 Command: Trust new Hostkey: Once
2010-07-07 10:35:21 2690 2 Command: Pass: *******
2010-07-07 10:35:25 2690 2 Status: Connected to XXX.XXX.XXX.XXX
[Code]...
I'm currently searching for a good ftp storage (with sftp supported) to back up my stuff. I had a look at amazon's S3. That looks good, but maybe a bit pricey. Do you guys have any ideas?
View 2 Replies View RelatedI'm wanting to setup SFTP in a chroot, which is simply enough to do and I already have it working; however I also want it so that when they connect via SFTP it goes directly to their home directory. Currently I have the following in "/etc/ssh/sshd_config":
Code:
Subsystem sftp internal-sftp
Match Group sftp-users
ChrootDirectory /home
AllowTCPForwarding no
ForceCommand internal-sftp
Which works perfectly fine, however when they connect there are shown the contents of the "/home" directory which they then have to "cd username" to get to their home directory. This I do not like, and it confuses our clients who connect saying they can see "random folders that aren't mine", or some that think they've "hacked" the server. I really need it so upon connection they go to "username" directory. I can do this by using:
Code:
usermod -d /username username
Which changes the users home directory to "/username", and then upon connection it works just fine, they are taken directory to their home directory. However, I really really do not like the fact that "/etc/passwd" shows a different home directory to their real home directory, i.e it states "/username" when actually it is "/home/username".I've spent the entire day looking a different ways of doing it, and I can't come up with anything.
I have recently configured sshd_config to have chrooted SFTP service. I'm using SFTP internal-sftp config. However now I have to figure out how to log file transfers happening using the SFTP service. I'm using the Ubuntu Server 10.04 (64bit)
View 3 Replies View RelatedI have a openSSH server, it works to connect to it within the local network but I can't connect to it from the Internet. What I would like to do is to connect to the server using filezilla client, simply by using username and password.To make it secure from brute force attacks will I only allow connections from specific IP number.
I have a server with the static internal ip 192.168.1.5, port is 2222. My global ip is 10.4.5.6 and I would like to connect with filezilla client from ip 11.1.2.3. How do I connect?
I'm running Ubuntu 10.04 LTS Using sftp, is there any way to force particular file permissions upon upload? I want the permissions on all files uploaded via sftp to be 664.
I've searched around and cannot find an answer. Many people ask similar questions and many responses recommend using umask, but as far as I understand it, umask is just a bit mask--it cannot be used to set permissions.
System:
Ubuntu 9.04
OpenSSH 5.1p1
I recently set up SFTP on my server and in doing so wanted to create a jail for users. I went through the steps and edited the sshd_config accordingly and got everything to work perfectly. However since doing so I can no longer ssh to that machine as I once was able to do. SFTP and the jail work fine however if I comment out ChrootDirectory /home/%u and ForceCommand internal-sftp in the sshd_config; I can now ssh to that machine however the jail no longer works. I need to be able to have the jail working properly for SFTP along with being able to ssh to that machine. Is this possiblesshd_config: Jail works for SFTP but no ssh
# Package generated configuration file
# See the sshd( manpage for details
# What ports, IPs and protocols we listen for
[code]...