My disks are constantly being remounted as read only. Even after I manually mount them and explicitly specify the rw option, after a while I find they have become read only. Needless to say, working like that is impossible. Fortunately the root partition is not affected, but every other partition is.
View 7 RepliesIs there anyway of reading old floppy disks on a computer running ubuntu lucid 64 bit?
View 5 Replies View RelatedAfter a motherboard crash I have a problem. i have a LVM2 partition that is placed on 2 different physical disks that i need to read. Since I am pretty new to Linux/Fedora a friend helped me to install the system on my old system so i am not sure if the disk is formatted as ext2,ext3 or xfs. How do I mount these 2 disks to be able to read the files? when i run fdisk -l I got:
[code]...
Having some troubles with NEC AD5170A device - it can`t read any dual layer disks. First layer reading is ok, but when drive switching to second layer it stops and don`t read any data from disk. Media - licensed DVD video disks. Same drive in windows read everything. I try to update firmware, but it doesn`t.
[Code]....
I have a 3ware controller that has a RAID 1 of two SATA disks.After an outage, the linux box (which is running ubuntu), restarted and the partition is now mounted read only. I only have the "/" mount point (this is a test server).Now, if I go to the 3ware controller by pressing ALT-3 while booting, I don't see any indication that there is something wrong with the disks.If I let the computer boot, I'm asked by fdisk if I want to fix/ignore/etc the inconsistencies found.
View 1 Replies View Relatedi am running 10.10 server. i shut down the server to install a new hard drive for backups. When i remounted the drives and restarted the shares, About 10 very important files were missing. The rest of the data on the share is fine.
View 2 Replies View RelatedI'd like to perform a system backup (yast/system/system bkp - SUSE 11.1) Despite I indicate an external drive with enough free space, system bkp first uses /tmp. My /tmp is mounted with / on a small size partition (sda6) with only 7 GB free. I'd like to (re)mount it on sda7, then restart the system backup.
How to do it exactly? (read somewhere I can only re-mount /tmp on empty partition, which is not my case)
Also I'd like a permanent change in /etc/fstab.
Code:
I have a volume that shows as the following when I do a df -h. How would I go about unmounting it so I can run an e2fsck on it, then remounting it? normally it mounts when the server starts, so i'm not sure how to manually do it.
View 7 Replies View RelatedI'm relatively new to linux in this capacity. I've had to reboot a SAN host (iSCSI initiator). I took a grab of the df -h output before reboot to ensure I was all mounted again afterwards.
Code:
Jupiter:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 30G 18G 11G 64% /
udev 1007M 128K 1007M 1% /dev
/dev/sda3 30G 11G 18G 39% /var
/dev/sdb1 2.0T 1.2T 756G 61% /mnt/kvsan2/distribution
/mnt/kvsan2/distribution/wwwroot/kvAutoUpdate/publish 2.0T 1.2T 756G 61% /home/ftpupload.kv_users/config/ftp
/mnt/kvsan2/distribution/artwork 2.0T 1.2T 756G 61% /home/artwork
192.168.10.45:/mnt/KVSAN5_TH/mp3 2.0T 365G 1.7T 19% /home/ftpupload.kv_users/config/ftp/clips/mp3
192.168.10.45:/mnt/KVSAN5_TH/mpeg 2.0T 1.2T 878G 57% /home/ftpupload.kv_users/config/ftp/clips/mpeg
/mnt/kvsan2/distribution/wwwroot/kvAutoUpdate/publish/musiccon 2.0T 1.2T 756G 61% /home/artwork/Musiccon/autoupdate
/dev/sdc1 50G 23G 25G 49% /home/artwork/Musiccon/musicnew
However upon reboot I am faced with
Code:
Jupiter:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 30G 18G 11G 64% /
udev 1007M 128K 1007M 1% /dev
/dev/sda3 30G 11G 18G 39% /var
/dev/sdb1 2.0T 1.2T 756G 61% /mnt/kvsan2/distribution
Jupiter:~ #
I'm trying to resume copying from a mounted CIFS device to my local hdd with cURL. I tried
Code:
$ curl -C - -O file://myfile
and also
Code:
$ curl -C <manual offset> -O file://myfile
(looked up the manual offset using "$ wc -c")
This resumes copying if I cancel it eg with ^C.
But it does not work if I unmount and remount the CIFS device. cURL then ignores my given offset and continues again from start as if nothing were there without saying a word. With "-C -" the same effect.
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
I have a Dell Optiplex 760 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
running:
I tried to upgrade to FC11 via download and DVD and in both cases the install hangs on bootstrap right after remounting the root filesystem in read/write mode.
Since it hangs in this manner, I have not been able to gather any logs...
I have servers which contain SATA disks and SAS disks. I was testing the speed of writing on these servers and I recognized that SAS 10.000 disks much more slowly than the SATA 7200. What do you think about this slowness? What are the reasons of this slowness?
I am giving the below rates (values) which I took from my test (from my comparisons between SAS 10.000 and SATA 7200);
dd if=/dev/zero of=bigfile.txt bs=1024 count=1000000 when this comment was run in SAS disk server, I took this output(10.000 rpm)
(a new server,2 CPU 8 core and 8 gb ram)
1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 12.9662 s, 79.0 MB/s (I have not used this server yet) (hw raid1)
[Code].....
I've managed to install the 32bit version on my laptop with little issue, and I'm really liking the Unity interface. There's a few issues around customisation and minor usability quirks, but from my experience with things like KDE4, I'm guessing it's only time. Anyway, I've been having major problems getting the 64bit version running with my Desktop. I have 8Gb of RAM in that, so it's not really an option to use the 32bit version. The Installer crashes constantly, but I was able to upgrade from 10.10 using update manager, but unfortunately Natty is no more stable than it's installer.
While logging in, or shortly after, the machine will crash to a text console displaying a Kernel Panic message. There's also messages indicating a problem with the CPU MCE. I've tried setting various kernel parameters at boot, such as nomce and nomodeset, these have extended the time the machine is up before crashing out, and removed the Kernel panic message, but not the crashes. I'm guessing the MCE messages were unrelated or a symptom in this case.I've done a huge amount of searching, and found no suggestions that I haven't already tried. Running Ubuntu 10.10 64 bit the system is rock solid.
I think I have found the problem to my Ubuntu laptop locking up, and it is most likely overheating. Is there any way to keep the CPU fan spinning at 100% constantly? I tried setting it up in the BIOS but it is an old laptop and I can't control it from there.
View 4 Replies View RelatedNew Compaq 610. All good so far but the fan seems to be on continually. Checked load cycle count and seems to be okay so far.
Any ideas? It wasn't doing this before and don't remember doing anything to make it happen but I have been tweaking a bit while setting up the machine.
Hardy 8.04.3 LTS (rocks!)
Ubuntu 9.04 64-bit I just checked my system monitor and it looks like my memory is at a constant 900 MB's out of 4 gigs of ram. This seems high for only having firefox open.
View 5 Replies View Relatedmy computer sounds as if I have been playing crysis warhead for like 5 hours, because every fan in my computer is running including the graphics card. They are not just running normal either they are running at the max.
View 4 Replies View Relatedit gets the hdd very warm and keeps the fan on constantly as well generally heating the whole system . was so bad i ended up having to go back to windows anything i can do to get the hdd to go in standy by when in active like windows ???? cause i hate windows and love ubuntu but i dont wanna burn up my machine to keep ubuntu
View 7 Replies View RelatedI've just completed a fresh install on natty, and I'm seeing constant disk writes of around 1Mb every couple of seconds.
I looked at iotop to find the culprit, and it seems to be the journalling manager for the ext4 filesystems:
Code:
215 be/3 root 0.00 B/s 19.23 K/s 0.00 % 5.89 % [jbd2/sda1-8]
Is there something I can do to adjust this behaviour somehow? I'm a bit concerned about wearing the disk out before its time...
I have installed Ubuntu from scratch several times since this problem started in Ubuntu 9*. It happens over and over again, and nothing seems to help.
My grasphic card is Nvidia 8500 GT. No matter what I try, to use no hardware drivers or use the recommended driver for Ubuntu my system shuts down without warning. I have used Ubuntu since 2004 and this is the worst bug I have ever experienced!
Is there a way to get rid of this thermal awareness program? Everything functioned fine until this stupid heat problem occurred. I want to turn it off but not to leave Ubuntu.
Lasdt night I was busy installing WinXP when my computer suddenly turned off, and Ubuntu could not be started again. Only show a screen with black and white parts and no desktop. Thats why I had to install Ubuntu again, and it turned off today while I use Firefox. Its the worst bug I have ever experienced.
Ubuntu main O/S windows 7 running in Virtualbox how or can i read a usb flash drive in the windows O/S i want to read my mp3 player
View 4 Replies View RelatedI'm running Ultimate Edition 2.0 64bit. When I'm running Firefox and I'm not doing anything on it it starts to use the disk intensively. I checked on terminal using the top command and it IS Firefox using up to 85-90% of the resources. Anyone know what the problem is here? Can it be hacked? I already uninstalled and installed back again and it still doing it.
View 1 Replies View RelatedGood day, installed ubuntu 10.04 64bit yesterday on my laptop just to test everything before the release at the end of the month. However I took a look at my System Monitor and my second CPU(2) is constantly running at 100%, however theirs no apparent processes to cause this.
View 1 Replies View RelatedI am running 10.04 beta right now, on a hp a6740in , I have wireless usb adapter WG111v3 with me for connecting to my home network , It works perfect in windows but i am trying to get working it with Ubuntu since the past year. In 10.04 beta , It MAY connects for sometime and then drops out,trying to connect again and again, asking me to review the password each time.
I have also filed a bug about the same some 6-7 months month ago, but the ubuntu community seems busy with many other things. So i decided finally posting on the forum again , hoping to get a working solution this time(previous was when jaunty launched) This is the only thing that keeps me away from using ubuntu for my general day work, I have already searched through ubuntu forums but always end up with ndiswrapper thing which doesnt works.
System:
Ubuntu 9.10
Gateway SX2802 (Core 2 Quad)
4GB RAM
750GB drive
Everything was fine for the first 6 months. Now in the past couple weeks, my disk drive is running nearly constantly. I can hear it rattling away in the background no matter what I am doing. Typically, I just have Firefox open, and that disk drive is sounding like it's writing the whole thing over and over.
I've opened the system monitor and looked for something obvious, but everything says, "sleeping". The computer seems to operate fine - no crashes, no odd behavior. What's this thing doing?
We've had a very big problem with our computer chrashing for a while, and I'm not sure if it's Linux Ubuntu that's the problem or not be we'd like some feedback from the experts of this forum. I hope I'm posting this in the right place. So, a while back we had Windows XP on our machine, and it had been running well (as well as XP is capable anyway, ), but for some reason it wouldn't boot XP properly and would only allow us to open it in Safe Mode.
We opened up the computer to take the memory chips out and back in, just in case that would help, and the inside was terribly dusty. Also, we have a loose heatsink, and the chip underneath is filled with dust. Not sure what the chip is I'll try to get some picture of it pretty soon. Anyway, the inside of the machine obviously wasn't too good.
So, we installed Linux Ubuntu LTS 10.04 on it from a CD to try to fix the booting problem, and this worked -- but now, our computer crashes constantly after turning on. It crashes whatever we're doing -- we can do something light, like Google Chrome, or something heavy, like video editing, and have it crash on us. So it doesn't seem to be a problem with the programs or anything -- I'm guessing it's either an issue with the computer itself or an error with the operating system. Sometimes we're lucky and can be on the computer for half-hour to and hour and a half, but it's still really bothersome, and will get in the way of any projects that require saving or recording. I'd guess it crashes around 10-20 times a day.
I included a video of it crashing and what it does just in case that could be of any help. Link: [URL]... The screen goes blank for a moment -- shows oddly colored, fragmented bars in the center of the screen (sometimes red, sometimes silver), shows this text:
Code:
* Speech-dispatcher configured for user sessions
* Starting the Winbind daemo
winbind [ OK
* Starting Common Unix Printing System: cupsd [ OK
* PulseAudio configured for per-user sessions
[Code]...
Why is ubuntuone constantly uploading something at a rate of 10Kbps? I am not even logged into it.I have deleted it completely just to stop the constant 10Kbps uploading, but still, I am interested to know what was being transmitted.
View 1 Replies View RelatedI have been running Ubuntu for 2 years and have not had a problem like this. Randomly one day my wireless dropped out. I can see other networks on my laptop, but they are all locked so i cant test and see if i can connect to them so i went to my friends house and was connect fine for over an hour.
Also my PS3 and my windows box connect to my router and internet just fine.
I then assumed that this was a hardware issue then with my wireless card on my laptop. So i called up lenovo and they sent me a new wireless card. I installed it and still had the same problem.
Lenovo t400
Intel 5300 Wireless
Ubuntu 10.4
Router
Dlink-655
I realixe i am not giving to much information, let me know what you need and i will provide it.
I tried buying a new router now and it worked great!!!..... for an hour. Now it is doing the same thing.
I'm using an Acer Aspire One d250 running Netubuntu 10.04. The wireless connection to my router fails at random intervals and spends most of it's time trying to reconnect. It will occasionally ask me to input the password to the network, which is already entered in the dialog box, and clicking "connect" doesn't seem to make any difference. Also, when it is disconnected from the network, none of the other computers in the house, wired or wireless, are having any problems. If there is any more information I could provide,
View 1 Replies View Related