Ubuntu :: Deleted Language Still Shows Partially?
Nov 5, 2010
I'm running an English language Ubuntu 10.10 and after a fresh installation, I installed support for the Spanish language via Administration> Language Support. After unistalling that language it still keeps ramdonly appearing in some parts of the system. For example in System>Administration>Configuracion del cortafuegos (Firewall configuration) (!!!!). Another example is in the terminal. The biggest part of it is in English, however all the lines that show, for example when installing a package, are in Spanish
View 1 Replies
ADVERTISEMENT
Dec 27, 2010
the little four squares in a grid beside the KDE launcher. Looked through all the Plasma widgets and didn't see this one. How do I get it back? Tried everything I could think of
View 3 Replies
View Related
Mar 9, 2011
I have a Kingston 8gb Datatraveler that has been giving me troubles lately. For some reason after I delete files from it it still shows up as full and the files are shown in the hidden trash files. How do I get rid of these files? I can't delete them as they just show back up. Also, I tried to format the drive with gparted and it won't unmount. When I right click and select information, at the bottom it says: Unable to find mount point. Unable to read the contents of the file system. Because of this, some operations may be unavailable.
View 1 Replies
View Related
Feb 22, 2011
i have installed bless hex editor on my fedora 14 laptop.However when i open it ,it shows "mono-core wants to install a font language code not matched: utf-8" i am not able to use bless hex editor properly.
View 4 Replies
View Related
Mar 5, 2011
I have some music in another language, but when I open the songs in Banshee, their song names just come up as weird characters (like μ).I went to [System --> Administration --> Language Support] and installed support for that language, but the songs still come up like μ. (But in Nautilus, their proper names show).
I know the solution is to change my whole system language to that language, but I don't want to do that, as I am not very fluent in it. Is there any way to enable support for that language while keeping English as the language used to display my desktop?
View 1 Replies
View Related
Nov 1, 2010
One computer .... three users .... three languages. How do you make that happen? User A speaks English and is happy with English. No problem. User B needs to use Chinese and would like the full system in Chinese. User C needs to use Thai and Chinese. They would prefer their menus to be in Thai and can use iBus for Chinese entry. How do you set up the system so that each user can select their system language when they login?
View 4 Replies
View Related
Jun 13, 2010
is there some way to change keyboard language to specific language by hotkey?
For example:
Shift+Alt+1 - English
Shift+Alt+2 - Russian
Shift+Alt+3 - Ukrainian
View 2 Replies
View Related
Nov 28, 2010
While installing Ubuntu 10.10 I chose the wrong language for my keyboard. I tried to fix this in keyboard preferences and it seemed to work. The correct one I need is USA (and don't know exactly the difference between USA and USA alternative international). But every time I boot my laptop I get the old language back (Dutch) while USA is above the others in my preferences.
View 1 Replies
View Related
Jan 7, 2011
When I boot the fedora system,disable the plymouth,the language of booting message showed is english.Can it change to other language,chinese?
View 2 Replies
View Related
Apr 14, 2010
i recently got a french msi wind U100x running on linux suse enterprise 10 sp1. (i am french and wanted a light netbook with french keyboard)i am totally new to linux and i believe that msi wind is not helping.because i am more used to english for settings, i set the main language to english, but it seems that it automatically reconfigures my keyboard mapping to english as well, so that azerty becomes qwerty.i reset it back to french, so now my keyboard is french, but so is the system.is there a way to differentiate keyboard from main user setting language?
View 3 Replies
View Related
Jul 16, 2010
I have a remote server which has been working perfectly for about 1 year. It is in a secure location and used for serving a local web-app, and we remote administer it through an OpenVPN tunnel, and previously a Hamachi tunnel.It has in the last few days become partially unresponsive. What I mean is that I can ping it fine through the VPN, and I can SSH into the box, but when I try to run some commands, it seems to freeze partway through, and I get the output interrupted and a blinking cursor. I have also tried to access the web-app through the VPN and while the page header in the browser changes to the correct page name, the actual page does not load.A reboot does not seem to have cleared the problem, although I cannot be certain at this moment that the reboot command actually completed, or froze partway through
View 4 Replies
View Related
Mar 11, 2010
I'm actually using both system, Ubuntu 9.04 and Windows XP, I got an HDD Western Digital (WD4000YR) with 400GB capacity, I have this weird problem (confirmed on other MoBo's with the same problem):
Power on the PC > In BIOS, disk capacity is 150GB > Start on Linux > In linux, disk capacity is correctly display: 400GB > Reboot > Start on Windows > disk capacity is correctly display: 400GB
BUT IF
Power on the PC > In BIOS, disk capacity is 150GB > Start on WINDOWS > in Windows, disk capacity is incorrectly display: 150GB
Linux its the solution to my problems, if I start on linux and then i REBOOT to windows works fine, but it doesn't if I turn OFF the PC. I need both systems due to incompatible software. My question is: Why in LINUX the disk works fine and if I reboot the disk continues doing just fine? What linux do that windows doesn't on the disk thing? I though maybe adding a line in windows option of the GRUB or something.
What I tried:
Fill with zeros using the WD tool, resign and format in Windows
Fill with zeros using the WD tool, resign and format in Linux
Format in Windows
Format in Linux
I have to say that the disk works great, when I do that (start linux then reboot to windows) the disk works just great, I had large movie files in there and works. So maybe the disk its not.
View 6 Replies
View Related
May 9, 2010
Since installing Lucid LYNX LTS on my Netbook. (See: [URL] [#136]). Via USB, I can connect my iPhone 3GS. It gives me two simultaneous choices:
Open F-Spot and Open Rythmbox.
In addition, I can also "Open / Browse Folder". As such, I can view / import photos and videos made on the phone, as well as video PODCASTS. I can also play my music files
What I cannot do:
1) Play / find my purchased audiobooks [decryption not supported]
2) Locate the mp4 videos / movies (NOT encrypted) that I transferred to the phone via iTunes on my MacBook.
3) Send a file via bluetooth to the phone [the Indicator Applet does allow me go go as far as select the file. It gets to the point of "connecting" then "unknown error occurred"
I cannot sync the addressbook, calendar, or notes on the iPhone with my netbook. I have the following libraries installed:
ifuse
libmobiledevice-utils
libmobiledevice0
libplist++1
libplist1
libusbmuxd1
python-imobildevice
usbmuxd
NOTA BENE: This phone is NOT jail-broken.
View 2 Replies
View Related
Sep 24, 2010
I have a script that pops up a jpg file several times a day as a reminder. The script is called up by crontab and it works perfectly.The issue is that I want the script to also perform a system "beep" in addition to popping up the jpg file. When I test it on the command line everything works but when I run it in cron the jpg file pops up but the beep doesn't beep. I'm thinking the problem is in the "echo -e \a" part. I must be missing something.Here is my script:
#!/bin/bash
echo -e \a
sleep01; echo -e \a
[code]....
View 8 Replies
View Related
Oct 13, 2010
I just tried to upgrade from 10.04 to 10.10, but since update-manager did not show the upgrade button (for some reason it did not know that there was a new release?), I tried upgrading using sudo do-release-upgrade.This only worked partially though, and now when I run lsb_release -a it says that I am running maverick, but when I try to run update-manager, it says that the upgrade was only completed partially, and it suggests that I try to finish the upgrade, but it then gets the following error:"An upgrade from "maverick" to "lucid" is not supported with this tool"
View 7 Replies
View Related
Jun 4, 2010
My recent install of 11.2/KDE on a laptop suffers from a strange misbehaviour of the compose key (I have declared the Windows and Menu keys as Compose). It appears that two different sets of composing sequences are active, depending on the application.
I have to explain that I use a lot of unusual characters on a regular basis and therefore keep adding more sequences to /usr/share/X11/locale/en_US.UTF-8/Compose. I have even redeclared a couple of predefined sequences to values that are more useful for me. All these work fine, for example in a terminal window (konsole or xterm) or in konqueror, or even in OpenOffice.
However, other applictions seam only able to handle the default set of Compose sequences. This applies, for example, to Firefox or Gimp. It does not matter whether they are invoked from the command line or from a desktop icon. I tried both the Firefox shipped with OpenSuse, and a download from mozilla.org: Same result.
I tried to delete other Compose files from /usr/share/X11/locale/* but it did not help. I wonder where the default rules are actually found after deleting all the Compose files, even if (for some reason) the locales have changed in these applications.
View 2 Replies
View Related
Jun 7, 2010
I searched the forum with various terms and didn't find anything, so my apologies if this is a common and/or newbie problem.It seems that when I have a USB driveplugged in to switch the files around, those that I delete are still taking up space. I first noticed it with a Chinese MP3 player and thought it was the player being crappy. I could still play all the songs that were supposedly gone. Today, I noticed it with a little thumb drive that I've had for years. I plugged it into my husband's computer running winXP, and the files showed up in a weird, unusable form. I was able to delete them for real.
View 4 Replies
View Related
Jan 19, 2010
I hit some trouble upgrading from FC 10 to FC 12 using the netinst CD. I had previously successfully upgraded the system from FC5 to FC10 with the same method - that time everything went well. At first the upgrade went well - the installation program found my FC installation and detected the partitions right. The problem appeared when about 90% of the rpm's were installed. Anaconda was complaining about a fatal error with a package and quit.
After rebooting and restarting the installation program it does not recognize my partitions anymore and suggests I'd format them for a fresh installation. As all my data is there I'd rather not do that. I then rebooted again and chose "Repair" from the installation menu. I got to the console and noticed that all partitions mounted cleanly and all the data seems to be there. Trying to reboot from the hard disk almost works. The system gets up, goes through grub, gets the kernel running and mounts the disks but fails to launch Xorg.
I get to a terminal login from here by pressing Ctrl+Alt+F2. When I type the user name and press enter the terminal seems to crash - does not ask for the password but simply returns to the user name query. An error message flashes just after pressing enter but too quickly for me to read. When I boot from CD again and go to the terminal via the "Repair" option the previous events can be seen from /var/log/messages. Xorg tries to start and stops trying after a certain amount of failures. After that it says this:
Code:
init: prefdm main process (2123) terminated with status 1
init: prefdm main process ended, respawning
init: prefdm respawning too fast,stopped
[code]....
My best guess is that this happens because the upgrade was aborted before it completed and hence some necessary rpm's were left out. I figured I could possibly fix this by updating the packages with yum from the terminal if I got to log in. What should I do now? Could I for example try and manually copy some missing files to the disk as I can access it via the repair option?
View 12 Replies
View Related
May 20, 2010
I have downloaded the package Sauerbraten (game) partially through Software centre(Ubuntu 10.04). Now I don't want to install it. how to delete that partially downloaded package? It is wasting too much space....It is located in /var/cache/apt/archives/partial/ I tried to delete them manually but it didnt work...
View 7 Replies
View Related
Apr 1, 2011
I installed 10.04 onto an old dell and its was running great, internet etc.. I then had my home desktop crash and said great, let me bring the dell home so the wife can use it. At home, i have a wireless card ( Netgear WG311 ) that I then installed into the Dell. Being that she was needing to use it online right away, I searched for the first install as it was not detected, and used used synaptic to install the bcmwl-kernal-source as that was the prefer ed driver for Netgear. So now that I installed that, not only have I not fixed the wireless issue, I now have no wired internet. I've been searching and re reading as many steps as I can, but am running out of time as she needs the computer tomorrow. Installed the ndwrapper ? but was not able to actually get the driver installed. All the other threads seem to be older ubuntu versions, and maybe its just me but the slight variation from one to the nex has me a little confuzed.
mike@mike-desktop:~$ sudo lshw -c network
*-network:0 UNCLAIMED
description: Ethernet controller
product: 88w8335 [Libertas] 802.11b/g Wireless
[code]....
View 4 Replies
View Related
Aug 26, 2009
I have a (partially) formatted DVD+RW disc, and need to do a full format in order for wodim to be able to properly write to it, since wodim does not do DVD formatting automatically, despite what its man page says. (I want to write using wodim, NOT growisofs, since wodim has a -pad option for zero-padding, and the -pad option to growisofs doesn't work when burning an ISO file.) ,
wodim -v dev=/dev/dvd -format
doesn't work on an already partly formatted disc, only an unused one. And
dvd+rw-format -force=full /dev/dvd
doesn't work either, claiming the command-line option is unimplemented (even though the usage is documented). Is there any natural way to do this, or do I have to do something ugly, like using growisofs to write an exactly 4.7 GB file to the disc?
View 1 Replies
View Related
Jul 18, 2010
I have a flaky internet connection. So it's important for me to be able to resume partially downloaded files. I would like the YAST software manager to resume downloads of packages where I left off in case of any error. Is this possible?
View 5 Replies
View Related
Feb 17, 2010
I run openSUSE 11.2 (kernel 2.6.31.12) and I use Wine 1.1.38 to play World of Warcraft from the konsole terminal application. For the most part this works okay, but there is one small issue that continues to annoy me:
Look at your keyboard (assuming standard QWERTY no-name keyboard) - see the key just left of your Backspace key? That key is only partially working for me in WoW. I cannot bind it to any action bar button in-game, with or without addons enabled. For some reason the key works fine when entering text into the chat console though.
I have used xev to get a bit of data on the key itself - not that it is that informative to me though, but the absence of the issue when playing WoW through Windows would suggest that it is somehow endemic to my Linux configuration:
Code:
KeyPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x1a7, subw 0x0, time 6474080, (159,-10), root:(1364,15),
state 0x10, keycode 21 (keysym 0xfe51, dead_acute), same_screen YES,
XLookupString gives 2 bytes: (c2 b4) ""
XmbLookupString gives 0 bytes:
XFilterEvent returns: True
[Code]...
View 2 Replies
View Related
May 19, 2010
I have an Ubuntu server running with lighttpd.
The file, access.log has utilized 73GB at: logs/lighttpd/, which contains data since 3 to 4 years (approx.)
So, i need to have only last 6 months logs in the file and the rest to be cleared.
View 4 Replies
View Related
May 18, 2010
I need to overwrite the first say 50 or so lines of an xml file on an everyday basis. The first 50 lines of the file are always the same and the 50 lines they get replaced with are always the same. Is there a way to create a file with the 50 new lines and somehow copy/merge/overwrite the larger file such that the 50 original lines would be replaced but the remainder of the file would be untouched?This seems simple, there has to be a way to do it. I'm just not smart enough to figure it out.
View 2 Replies
View Related
Mar 28, 2010
Quote:
Code:
I've used these commands to generate my new keys and immediately got my sshd server running.
However, I now have the problem where the password is not being recognized and is repeatedly asked for.
View 2 Replies
View Related
May 2, 2010
My connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?
Here is a bunch of things I have tried and the results.
nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured
[Code].....
View 9 Replies
View Related
Jan 2, 2011
I have a strange problem where my machine will suddenly stop responding to connections while still remaining partially connectible. Here's an example sequence of events I have taken (numerous times). If anyone can spot something else I should check or has seen these symptoms before please let me know.1) System is using an Edimax 7318-usg, Ubuntu 10.042) Wifi connection is working, with power management turned off (iwconfig)3) Signal strength does not cause the connection to drop (confirmed with router logs)4) When in a ssh session on the problem machine suddenly the ssh session is dropped "host is down"5) When I attempt to re-initiate ssh it fails, no route to host...6) Pinging it fails, accessing a webpage hosted on it fails, all access fails7) The machine I'm pinging/sshing from still has a good network connection8 ) I check my routers DHCP leases, problem machine still has a valid lease.
9) Router still shows problem machine in routing & arp table & shows active traffic going to and from (I checked the routers states and bandwidth monitor for this)10) I try sshing and pinging the problem machine from the laptop on the local network, it still fails, no route to host, wtf?11) I go to the problem machine physically, wifi connection is up with decent signal12) ifconfig indicates it still holds an IP address13) I open a browser on the problem machine, any webpage loads fine14) I ping the laptop from the problem machine, ok15) I ssh from the problem machine to my laptop, it works16) At this point I ssh from the laptop to the problem machine, sometimes it works sometimes it fails(it seems that pinging/sshing the laptop FROM the problem machine sometimes makes it connectable again).
17) Usually if I wait a while the problem machine will randomly become connectable again at random intervals18 ) The only reliable way to make the problem machine connectable again is manually reconnecting it to the wireless network19) I tailed auth.log ufw.log, etc. nothing suspicious disallowing my ssh connection20) dmesg shows nothing unusual, as far as I can tell, just some activity negotiating WPA keys and suchBy looking at the timestamp for the WPA negotiation and cross referencing the router bandwidth monitor I can tell the WPAnegotiation doesn't make it drop the conectionSo that's it, lol.
View 6 Replies
View Related
Jan 8, 2010
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
View 9 Replies
View Related
Jul 5, 2011
I have recently installed fedora 15, I'm trying to connect my mobile phone to my laptop through bluetooth, when I did setup new device it is just showing device address and (instead of name), and the forward button is not enabled..FYI - I have started and enabled the bluetooth services using systemctl
View 9 Replies
View Related
