I'm trying to be a good user and back up my hardrive onto my external using deja dup and it his me with this error message:
Code:
OK, any ideas at all what I'm doing wrong? I used deja dup to back up my last computer without any issues but I seem to be making some kind of mistake this time around.
i want to install deja-dup 14.2 when i configure it, i found error here is the eror when i configure it
[root@harry deja-dup-14.2]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
[code]....
I used Deja dup to back up my Ubuntu eventually I reinstalled ubuntu and went to restore from the files that Deja Dup created but when it said it was done there was no change. I can go into the difftar.gz files and see my folders and files and even tried extracting them from there but when I open them all the information isn't there.
I haven't restored Ubuntu till now so I don't know if I'm doing it wrong or not but its REALLY important that I get some of these files. am I missing a step, or what?
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View Related[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedI have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedI'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedSomething go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View Relatedwhen I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies View RelatedI'm trying to run a simple program in Ubuntu OS, Netbeans application but I cannot resolve the error message. Can someone please assist.
/usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf
make[1]: Entering directory `/home/bee/NetBeansProjects/HelloWorld2'
/usr/bin/make -f nbproject/Makefile-Debug.mk dist/Debug/GNU-Linux-x86/helloworld2
[code]....
Downloaded the 64 bit console only package, attempted to run and got this error message:truecrypt: error while loading shared libraries: libfuse.so.2: cannot open shared object file: No such file or directory
View 6 Replies View Relatedwhen i select Ubuntu from the boot menu (I'm dual Booting with win7) I get an error message see the attached file for the message. it then takes about 3-5 minutes until i get to the Ubuntu log in screen
View 9 Replies View RelatedI receive an error mesage during install of ubuntu 10.4 while partitioning ext3 freezes at 5% then a black screen. I see the cursor but can't move it with the error message "process:304): Glib - warning **: getpwuid_r() : Failed due to unknown user id (0)", I have tried installing 9.10 and 5.0.5 Debian when I installed 9.10 ubuntu and debian it just froze and wouldn't do anything.
View 4 Replies View RelatedI get an odd error message sometimes when I perform an apt-get operation.
Code:
Processing triggers for shared-mime-info ...
Unknown media type in type 'chemical/x-alchemy'
[code]....
Just installed Java so I use ADrive uploader. Uploaded one file then after that I got this error message from JAVA.
Java Plug-in 1.6.0_24
Using JRE version 1.6.0_24-b07 Java HotSpot(TM) 64-Bit Server VM
User home directory = /home/shibby
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
MyUploader Standard Edition version 1.14
Copyright JavaAtWork B.V. 2005-2010. All rights reserved.
I connect my mobile phone to Ubuntu and I get an error message that usb0 is not available. Here is the log:
Code:
--------------- System information ----------------
Platform linux2
[code]...
I can't seem to get BOINC to run on F12. I've installed it from the repositories and downloaded it from the BOINC website. I keep getting an error message "Error Retrieving current status".
View 4 Replies View RelatedI'm relatively new to using Ubuntu. I'm currently using Karmic, and got an error message when trying to update packages
View 4 Replies View RelatedWhenever Ubuntu tries to update itself or if I initiate an update I can install every but Deluge's update.I get the following:
AN ERROR HAS OCCURE:
E: /var/cache/apt/archives/deluge-common_1.2.0-2~karmic~ppa1_all.deb: trying to overwrite '/usr/share/pyshared/deluge-1.2.0.egg-info/dependency_links.txt', which is also in package deluge-core 0
What does this mean? It suggests filtering broken to fix it. I do so and mark deluge for reinstallation but it doesn't seem to solve anything.
I don't know what I'm missing or what I did to break it, but most screensavers that I have end up returning this error message:
"X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 16
Current serial number in output stream: 16"
This is also the output of glxinfo. Did I somehow break something in my graphics driver?
I have been using my desktop as a dual boot machine for several months now. The primary hard drive with windows on it died, and since we have been using ubunto 9.10 exclusively, I just removed the dead drive, changed the jumpers on the secondary drive to primary and did a clean install on the drive which presumably formats the disk before installing. When I try to boot from the hard drive i get the following message:
ERROR: no such device 2eb48bcb-7bb4-4080-b04d-fc32dec8c252
I download a few times and burned a few CD's but after I select install on hard disc or use the livecd the computer will hung up and then I have a message saying boot error, I download the iso image from 2 different sources but still not working. I'm installing on a Dell 500 with 256Mgs of memory (I have Ubuntu installed but its too slow).
View 1 Replies View Related
