Ubuntu :: DVD Burning With 10.4 / 64bit Failed
Sep 15, 2010
I have installed Ubunutu 10.4 64 bit on my AMD64 computer and most things seem to work fine. Except for burning DVDs. I have a BH10LS30 device which reads CDs and DVDs without problems. Then I wanted to burn a DVD+R (Philips) with the Gnome burn program (which autostarts when inserting a blank DVD+R) and it failed - disk not usable anymore. Then I tried with Brasero (which seems to be the same program) with same result. Then I installed k3b and it failed again - but not destroying the disk, just not touching it. Error messages all like "an unknown error occured".
Then I tried DVD+RW (Sony). That also failed. Then I booted the computer with Knoppix 6 from an USB stick and started k3b. Worked perfectly with the Philips DVD+R disks which failed three times in Ubuntu! What could be the problem? Could it be the 64-bit driver (Knoppix was 32 bit)? Could it be an Ubuntu-Issue?
View 2 Replies
ADVERTISEMENT
Sep 10, 2009
I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
View 3 Replies
View Related
May 11, 2011
I have just installed NS2.34 in my Ubutun 10.04. I have installed it successfully, but I got some failures in validation.
Validate overall report: all portable tests passed but some non-portable tests failed:
./test-all-srm ./test-all-smac-multihop ./test-all-hier-routing ./test-all-algo-routing ./test-all-mcast ./test-all-vc ./test-all-session ./test-all-mixmode ./test-all-webcache ./test-all-mcache ./test-all-plm ./test-all-wireless-tdma
I read the post of [SOLVED] Validation failed in NS2.34 in ubuntu 10.04 remix and followed the steps there. But, the same problem remains. I think the problem may be due to my 64-bit operating system.
View 2 Replies
View Related
Apr 11, 2010
I've just upgraded my 9.4 to 9.10 on my 64bit desktop PC. Shortly afterwards I noticed that MySQL had gone away. There was no mysqld running. I tried a restart to no effect. So tried an un-install and re-install with the Package Manager. This failed! There was quite an extensive message in details, which started:-
invoke-rc.d initscript mysql, action "start" failed
dpkg: error processing mysql-server-5.1 (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent prevent configuration of mysql-server
And it goes on, but that's the essence of it. I subsequently tried a complete removal and re-install, to no avail.I notice that /var/log/messages contains:
Apr 12 01:10:15 Mintaka kernel: [ 2538.821153] type=1505 audit(1271031015.407:259): operation="profile_replace" pid=9328 name=/usr/sbin/mysqld
Followed by many:
Apr 12 01:10:15 Mintaka kernel: [ 2538.885370] type=1503 audit(1271031015.477:260): operation="open" pid=9355 parent=9354 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
View 1 Replies
View Related
Jul 27, 2011
I can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies
View Related
Aug 25, 2011
Mounting other filesystems:FAILED i got this error on startup.Tryed to change names,to put none but always the same.
Code:
# /etc/fstab: static file system information.
#
[code]....
View 14 Replies
View Related
Nov 20, 2009
Has someone managed to install Oracle 11.1 on Fedora 12 ?
The following packages failed to install :
I couldn't find any of these packages in the x64_86 or i386 DVD. i686 version of the above packages are already installed, but I still get the error while installation.
View 3 Replies
View Related
Dec 8, 2009
The -162 kernel upgrade just released failed to boot in my x86-64 system. Additionally, both previous kernels failed in (probably) the same way. The progress icon proceeded all the way to its 'f' image, and then hung. I touched escape key, and found several disturbing messages among a dozen or so lines --
mdadm: No arrays found in config file or automatically. A dynamic linking error occurred: /lib64/multipath/libcheckdirectio.so: no such file or directory awk: cmd. line:1: fatal: cannot open file `/etc/inittab` for reading (Invalid Argument). Init: rcS post-stop process (807) terminated with status 2s. I got into rescue mode with my install disk, then looked for libcheckdirectio.so in /mnt/sysimage/lib64 but it was not there. Also, locate -d /mnt/sysimage/mlocate/mlocate.db/libcheckdirectio.so found nothing.
Ran chroot and executed the fakd diagnostic (which I had not seen before) and rebooted. Same problem - although now the screen is telling me SELinux is requiring a targeted policy relabel. My dual-boot-to-vista system has been erratic (requiring fsck several times, and confounding the Vista partition to require file checks), primarily since a large install of Eclipse and multiple plug-ins AFAICR.
View 14 Replies
View Related
Dec 22, 2009
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies:
libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
What to do for me to resolve this error.
View 4 Replies
View Related
May 4, 2011
Last night I wanted to test the suspend mode on my laptop (Asus K52J) after I had successfully used hibernation mode, which did not work until I installed the latest kernel update. Unfortunately, it didn't go very well. I had to power off the laptop manually. This morning, I booted up Fedora but it didn't go beyond the blue screen with the logo. It just kept hanging there. I rebooted and tried previous kernel configurations but none of them worked. As a matter of fact, I have to write this from Windows.
This is all rather odd since I tried to suspend before and though it never worked, the fact that I had to power off the laptop manually didn't prevent Fedora from booting. I really hate not being able to use Fedora. It's fortunate that I put all my important data on a separate NTFS partition...
View 3 Replies
View Related
Nov 4, 2010
A package nss >= 3.12.8 is not available. But it is needed by thunderbird update in the course of "yum update". yum exits with RC 1.Is "--skip-broken" the right way to exclude the thunderbird update ("Resolve depsolve problems by removing packages that are causing problems from the transaction")? Or is there a better way to exclude a package? Problem screen output:
---> Package thunderbird.x86_64 0:3.0.10-1.fc12 set to be updated
--> Processing Dependency: nss >= 3.12.8 for package: thunderbird-3.0.10-1.fc12.x86_64
--> Finished Dependency Resolution
[code]....
View 3 Replies
View Related
Jul 7, 2011
My phone won't connect when adding via a usb cable. The device is seen, but gives the following line in dmesg:
Code:
[ 982.151966] usb 2-5.4: new full speed USB device using ehci_hcd and address 6
[ 982.239668] usb 2-5.4: New USB device found, idVendor=05c6, idProduct=1000
[code].....
View 3 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Jul 25, 2010
Last time I want to run to fedora(14/64-bit), I faced to an error! I have a screenshot from monitor and attached it here I want to save my data on desktop
View 3 Replies
View Related
Feb 16, 2011
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies
View Related
Mar 16, 2009
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies
View Related
Jan 15, 2010
I have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
View 6 Replies
View Related
May 24, 2010
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
View 14 Replies
View Related
Aug 18, 2011
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
View 1 Replies
View Related
Aug 15, 2009
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
View 4 Replies
View Related
Feb 4, 2010
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
View 3 Replies
View Related
Apr 5, 2011
does anyone know where I can find libcrypto.so.6()(64bit) and libssl.so.6()(64bit) for Redhat 6 - based distributions?
View 6 Replies
View Related
Oct 17, 2009
Edit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
View 14 Replies
View Related
Oct 18, 2009
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies
View Related
Sep 1, 2010
i have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
View 8 Replies
View Related
Jun 21, 2011
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing
View 4 Replies
View Related
Sep 2, 2011
Iam trying to install F15 64bit but I failed my hardware as folow
mb : asus m5a88m
cpu: amd phenom ii x6 1100t
ram: 8 gb 2x4gb Kingston 1333
hdd : wd 1tb sata3
wd 1tb sata2
vga: ati 4250 b/in
installation media: downloaded dvd image burned the image installed correctly inside vmware and work as expected but the media boot to the first screen quistion and when press ok for new installatin the answer is a serious of errors messages (a lot of it). did my hardware not compatible??
View 4 Replies
View Related
Mar 5, 2010
I did a full install on 5.4 64bit. the installation aborted with the following errors:
View 1 Replies
View Related
Apr 9, 2010
I have an iso i want to burn on dvd, and have my laptop boot into it when it first starts up. how can i burn this on ubuntu? what burners can i use?
View 9 Replies
View Related
Nov 10, 2009
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
View 2 Replies
View Related
