General :: Validation Failed In NS2.34 In Ubuntu 10.04 64bit
May 11, 2011
I have just installed NS2.34 in my Ubutun 10.04. I have installed it successfully, but I got some failures in validation.
Validate overall report: all portable tests passed but some non-portable tests failed:
./test-all-srm ./test-all-smac-multihop ./test-all-hier-routing ./test-all-algo-routing ./test-all-mcast ./test-all-vc ./test-all-session ./test-all-mixmode ./test-all-webcache ./test-all-mcache ./test-all-plm ./test-all-wireless-tdma
I read the post of [SOLVED] Validation failed in NS2.34 in ubuntu 10.04 remix and followed the steps there. But, the same problem remains. I think the problem may be due to my 64-bit operating system.
View 2 Replies
ADVERTISEMENT
Aug 28, 2010
I have installed Ubuntu 10.04 remix in my new hp mini 110 netbook and I have succeeded in installing NS2.34 after a so many trials but now after running ./validate some of the tests have failed. Is my ns2 installation not successful?
Some non-portable tests also failed:
./test-all-srm ./test-all-smac-multihop ./test-all-hier-routing ./test-all-algo-routing ./test-all-mcast ./test-all-vc ./test-all-session ./test-all-mixmode ./test-all-simultaneous ./test-all-webcache ./test-all-mcache ./test-all-plm ./test-all-wireless-tdma ./test-all-satellite to re-run a specific test, cd tcl/test; ./test-all-TEST-NAME
View 6 Replies
View Related
Jun 11, 2009
After many modifications, I managed to install ns2.28 , but some validation tests failed. I got the following message at the end of validation test:
validate overall report: some tests failed:
./test-all-simple ./test-all-tcp ./test-all-testReno ./test-all-newreno ./test-all-sack ./test-all-tcpOptions ./test-all-sack-full ./test-all-tcpVariants ./test-all-LimTransmit ./test-all-aimd ./test-all-greis ./test-all-rfc2581 ./test-all-sctp ./test-all-tcpHighspeed ./test-all-frto ./test-all-friendly ./test-all-srm ./test-all-realaudio ./test-all-ecn ./test-all-ecn-full ./test-all-quickstart ./test-all-hier-routing ./test-all-lan ./test-all-mcast ./test-all-vc ./test-all-mixmode ./test-all-red ./test-all-adaptive-red ./test-all-red-pd ./test-all-rio ./test-all-vq ./test-all-rem ./test-all-gk ./test-all-pi ./test-all-cbq ./test-all-schedule ./test-all-jobs ./test-all-intserv
to re-run a specific test, cd tcl/test; ./test-all-TEST-NAME
Notice that some tests in webcache will fail on freebsd when -O is turned on. This is due to some event reordering, which will disappear when -g is turned on. I tried to run the test individually one after another, but that is too time consuming, it prompts for permission after every test and thus runs many test & opens a lot of xgraph window. The tests I run so far individually, agreed with the reference output. Now I am wondering, should I report a bug about it, or should I hire a kid to run those failed 40 tests( which require hitting the ENTER key 1200 times,maybe ), or what else should I do.
View 14 Replies
View Related
Sep 10, 2009
I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
View 3 Replies
View Related
Sep 15, 2010
I have installed Ubunutu 10.4 64 bit on my AMD64 computer and most things seem to work fine. Except for burning DVDs. I have a BH10LS30 device which reads CDs and DVDs without problems. Then I wanted to burn a DVD+R (Philips) with the Gnome burn program (which autostarts when inserting a blank DVD+R) and it failed - disk not usable anymore. Then I tried with Brasero (which seems to be the same program) with same result. Then I installed k3b and it failed again - but not destroying the disk, just not touching it. Error messages all like "an unknown error occured".
Then I tried DVD+RW (Sony). That also failed. Then I booted the computer with Knoppix 6 from an USB stick and started k3b. Worked perfectly with the Philips DVD+R disks which failed three times in Ubuntu! What could be the problem? Could it be the 64-bit driver (Knoppix was 32 bit)? Could it be an Ubuntu-Issue?
View 2 Replies
View Related
Apr 11, 2010
I've just upgraded my 9.4 to 9.10 on my 64bit desktop PC. Shortly afterwards I noticed that MySQL had gone away. There was no mysqld running. I tried a restart to no effect. So tried an un-install and re-install with the Package Manager. This failed! There was quite an extensive message in details, which started:-
invoke-rc.d initscript mysql, action "start" failed
dpkg: error processing mysql-server-5.1 (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent prevent configuration of mysql-server
And it goes on, but that's the essence of it. I subsequently tried a complete removal and re-install, to no avail.I notice that /var/log/messages contains:
Apr 12 01:10:15 Mintaka kernel: [ 2538.821153] type=1505 audit(1271031015.407:259): operation="profile_replace" pid=9328 name=/usr/sbin/mysqld
Followed by many:
Apr 12 01:10:15 Mintaka kernel: [ 2538.885370] type=1503 audit(1271031015.477:260): operation="open" pid=9355 parent=9354 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
View 1 Replies
View Related
Jul 27, 2011
I can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies
View Related
Aug 25, 2011
Mounting other filesystems:FAILED i got this error on startup.Tryed to change names,to put none but always the same.
Code:
# /etc/fstab: static file system information.
#
[code]....
View 14 Replies
View Related
Apr 22, 2010
I've just finished my 100% total move from Windows after 2 years of developing on two different systems, one Slackware and one XP. I have come away from Slack because it was just taking too long to maintain the rapid advances in development tools and have now moved onto Ubuntu full time.
The last tool I was using on Windows was Dreamweaver, and not for editing (I had Bluefish for that) but for the HTML validation that worked offline. Thing is, I now can't find anything similar on Ubuntu. I've no idea how to get the W3C Validators working offline and the last two add-ons I tried with Firefox didn't work. Anybody know of any packages with reliable HTML and CSS validation that works offline? An offline link checker would also be useful.
View 1 Replies
View Related
Nov 20, 2009
Has someone managed to install Oracle 11.1 on Fedora 12 ?
The following packages failed to install :
I couldn't find any of these packages in the x64_86 or i386 DVD. i686 version of the above packages are already installed, but I still get the error while installation.
View 3 Replies
View Related
Dec 8, 2009
The -162 kernel upgrade just released failed to boot in my x86-64 system. Additionally, both previous kernels failed in (probably) the same way. The progress icon proceeded all the way to its 'f' image, and then hung. I touched escape key, and found several disturbing messages among a dozen or so lines --
mdadm: No arrays found in config file or automatically. A dynamic linking error occurred: /lib64/multipath/libcheckdirectio.so: no such file or directory awk: cmd. line:1: fatal: cannot open file `/etc/inittab` for reading (Invalid Argument). Init: rcS post-stop process (807) terminated with status 2s. I got into rescue mode with my install disk, then looked for libcheckdirectio.so in /mnt/sysimage/lib64 but it was not there. Also, locate -d /mnt/sysimage/mlocate/mlocate.db/libcheckdirectio.so found nothing.
Ran chroot and executed the fakd diagnostic (which I had not seen before) and rebooted. Same problem - although now the screen is telling me SELinux is requiring a targeted policy relabel. My dual-boot-to-vista system has been erratic (requiring fsck several times, and confounding the Vista partition to require file checks), primarily since a large install of Eclipse and multiple plug-ins AFAICR.
View 14 Replies
View Related
Dec 22, 2009
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies:
libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
What to do for me to resolve this error.
View 4 Replies
View Related
May 4, 2011
Last night I wanted to test the suspend mode on my laptop (Asus K52J) after I had successfully used hibernation mode, which did not work until I installed the latest kernel update. Unfortunately, it didn't go very well. I had to power off the laptop manually. This morning, I booted up Fedora but it didn't go beyond the blue screen with the logo. It just kept hanging there. I rebooted and tried previous kernel configurations but none of them worked. As a matter of fact, I have to write this from Windows.
This is all rather odd since I tried to suspend before and though it never worked, the fact that I had to power off the laptop manually didn't prevent Fedora from booting. I really hate not being able to use Fedora. It's fortunate that I put all my important data on a separate NTFS partition...
View 3 Replies
View Related
Dec 17, 2010
sudo mkdir /etc/adobe=(created a directory in /etc named Adobe)correct?echo "OverrideGPUValidation=true" >~/mms.cfg=(created a text file in my Home directory named mms.cfg which contained the text...OverrideGPUValidation=true...correct?sudo mv ~/mms.cfg /etc/adobe/=(moved from my Home directory to /etc/adobe mms.cfg) correct?These commands were part of a flash tutorial but they did not work.So I cd'd into etc and using sudo tried rm -r /adobe. Basically Iwant to undo what those 3 commands did.Link to tutorial=(Flash in fullscreen is choppy, completely white or crashes)[URL]
View 4 Replies
View Related
Nov 4, 2010
A package nss >= 3.12.8 is not available. But it is needed by thunderbird update in the course of "yum update". yum exits with RC 1.Is "--skip-broken" the right way to exclude the thunderbird update ("Resolve depsolve problems by removing packages that are causing problems from the transaction")? Or is there a better way to exclude a package? Problem screen output:
---> Package thunderbird.x86_64 0:3.0.10-1.fc12 set to be updated
--> Processing Dependency: nss >= 3.12.8 for package: thunderbird-3.0.10-1.fc12.x86_64
--> Finished Dependency Resolution
[code]....
View 3 Replies
View Related
May 24, 2009
This question is regarding squid based security. We would like to enforce browser security onto our users and would like to know if anyone has performed this. Our goal is to check a users browser version/plugin level before allowing them to access the internet in our organization. If their browser does not meet a standard compliance level such as patches or if they are using i.e. 5.0 we would redirect them to a page telling them that they need to update their browser before access will be permitted. Has anyone performed any types of checks like these?
View 4 Replies
View Related
Sep 10, 2009
I want to validate a web form using PHP. I spent ages confusing myself with client side scripting and realised until I worked out it is not what I want. My problem is that now I am looking at PHP and everything is mixed up in my brain. I need to point out that PHP is very new to me! This is what I already have:
1 An html page with my form on it.
2 PHP page which emails the contents of the form to me.
The above works well. For the sake of clarity, here are my pages (cut down to the essentials where appropriate): My html form:
first name surname
Email
Home phone
Mobile
Work phone
I have read and understood your terms and conditions. My php script (regform.php)
$receiver = 'me@email'; $subject = 'New registration'; #$message = 'This is a new registration.'; $surname = $_POST['surname']; $firstname = $_POST['firstname']; $address = $_POST['address']; $email = $_POST['email']; $homeph = $_POST['homeph']; $mobileph = $_POST['mobileph']; $workph = $_POST['workph']; $time = $_POST['time']; #from here $oldaddress = $_POST['oldaddress']; $DOB = $_POST['DOB']; $elect = $_POST['elect']; $job = $_POST['job']; $salary = $_POST['salary']; $employer = $_POST['employer']; $benefit = $_POST['benefit']; $smoke = $_POST['smoke']; $claim = $_POST['claim']; $children = $_POST['children']; $children2 = $_POST['children2']; $pets = $_POST['pets']; $pets2 = $_POST['pets2']; $require = $_POST['require']; $terms = $_POST['terms']; $rooms = $_POST['rooms']; $body = "first name:$firstname
surname:$surname
DOB:$DOB
email:$email
home phone:$homeph
mobile phone:$mobileph
work phone:$workph
address:
$address
time at this address:$time
previous address:$oldaddress
electoral register:$elect
employment:$job
employer:$employer
salary:$salary
benefit claim:$benefit
future benefit:$claim
children:$children
ages:$children2
pets:$pet
pet type:$pets2
other requirements:$require
terms:$terms"; $headers = 'From: email' . "
" . 'Reply-To: email "
" . 'X-Mailer: PHP/' . phpversion(); mail($receiver, $subject, $body, $headers, "From: $firstname $surname
" . "Reply-To: $firstname $surname class="inlineimg" />;
You can see there are many more form fields than I have shown in my example html form above. What I want is that the following fields have to be filled:
1 mobileph
2 email
3 terms (checkbox)
I would like the user to be asked to fill the form in properly if any/all of the 3 fields have not been filled in. I imagine I need some php in the html page and some more in the php page. I am certainly not asking any one to do this for me but I am really confused. I have googled and copied and pasted and edited for 6 hours and I am lost. What I want is a very simple and clear example of the code needed. Sorry if I sound as if I can't search properly on Google: in this case I clearly can't!
View 2 Replies
View Related
Jul 7, 2011
My phone won't connect when adding via a usb cable. The device is seen, but gives the following line in dmesg:
Code:
[ 982.151966] usb 2-5.4: new full speed USB device using ehci_hcd and address 6
[ 982.239668] usb 2-5.4: New USB device found, idVendor=05c6, idProduct=1000
[code].....
View 3 Replies
View Related
Jan 12, 2010
The * would not have to be because it means everything [az] [0-9 ][$%&!"/()=?'=) but not how to solve[URL]..
ls [0-9a-zA-Z]*[@]*[gmail | yahoo | hotmail]*[.]*[com]
ls [0-9a-zA-Z][.-_][0-9a-zA-Z]*[@]*[gmail | yahoo | hotmail]*[.]*[com]
View 2 Replies
View Related
Jun 9, 2010
I'm writing a code to get the index of the last occurrence of a given substring in a string.
Code:
int StringHandler::lastIndexOf(string src, const string s) {
unsigned int lastIndex = string::npos;
if (src.find(s, 0) == string::npos) {
return -1; } else {
bool isLast = false; unsigned int i = 0; do {
lastIndex = src.find(s, i);
if (lastIndex != string::npos) { i = lastIndex + 1;
if (i == src.size()) { isLast = true;
} } else { isLast = true;
} } while (!isLast);
} return lastIndex;
}
My problem is: execution steps into an if with a false condition! Check the values of i and src.size() at the right panel. How could be possible for the program to run the highlighted statement? The if condition above is false! [URL]. I could use char arrays, for example, but this kind of false validation has happened to me more than once, I'm using G++ 4.5 with these flags: -O0 -g -Wall -c
View 3 Replies
View Related
Apr 1, 2010
I am doing a perl script validation for Phone numbers. The normal phone number format is 01-32145. I need to do two validations for the phone number
1) A valid phone number can have at least two digits as prefix and at least five digits as postfix. e.g. 01-01011
2) A valid phnoe number can't contain only the digit "0" in either area code or phone number e.g. 00-11111 or 01-00000 is not allowed.
I am able to do the first validation, but not the second. I am pasting my code part here. How to add the second validation inside my current code.
open(TMPOUTPUT, "<$tmp_output_file") or die "Can't open output";
open(OUTPUT, ">$output_file") or die "Can't open output";
while ($line = <TMPOUTPUT>) { $line =~ s/ +
//; ($cur_phone, $xxxxxx, $xxxxxx) = split(";", $line);
($cur_phone_prefix, $cur_phone_postfix) = split("-", $cur_phone);
$length_prefix = length ($cur_phone_prefix);
$length_postfix = length ($cur_phone_postfix);
if ($length_prefix < 2 || $length_postfix < 5 ) {
print "Invalid phone number: $cur_phone ";
} else { print "Valid phone number: $cur_phone ";
} } close TMPOUTPUT; close OUTPUT;
View 9 Replies
View Related
Apr 8, 2010
I am having a huge problem checking the data I input to make sure it is correct. What I am trying to achieve is when I input a value, it will check if the input is all digits and if it is not, check to see if it contains certain alphabets. Thus for example, if I were to input in data such as "11A" , the program will then inform me "There is an important alphabet in the program." This would be my expected output. Here is the program I have wrote...
Code:
int test(string r ){ const int arraySize = 10;
char array2[arraySize2] ={'A','B','E','F','G','H','J','K','N','O','P','Q','R','S','T','U','W','Y','Z'};
for(int cntr = 0; cntr <r.length(); cntr++)
if(!isdigit(r[cntr])){ for(int new1 =0; new1<arraySize2;new1++)
for(int cntr1 = 0; cntr1 <r.length(); cntr1++)
if(array2[new1] == r[cntr1]){ return 2; //will return2 when it finds the same
// char in the array and the string r. } else{ return 3;
//will return 3 when there is a char
//in the string which isnt in the array
} } else { return 1; // will return 1 when string is all digit.
} int main() { string r = "11D"; test(r);
if(test(r) == 1) { cout << "ALL ARE DIGITS" << endl;
} if (test(r)== 2) {
cout << "There is an important alphabet in the program." << endl;
} if (test(r)== 3) { // testRoman(r);
cout << "There is an Alphabet in the String which is not in the Array" << endl;
} }
So, the problem I am facing is when I input in data such as 11 or A , the prog will come out the right input. But if I were to put in data such as "11A" , the output coming out will be "ALL ARE DIGITS". The problem which causes this seems to be in the return statement , as once as it finds the first char which is a digit, it will then return 1 and not continue checking the rest of the string. Is there a way I can stop or continue a loop if it has met the condition I stated? What I can do or any other way available for me to check my input?
View 4 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Jul 25, 2010
Last time I want to run to fedora(14/64-bit), I faced to an error! I have a screenshot from monitor and attached it here I want to save my data on desktop
View 3 Replies
View Related
Feb 16, 2011
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies
View Related
Mar 16, 2009
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies
View Related
Jan 15, 2010
I have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
View 6 Replies
View Related
May 24, 2010
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
View 14 Replies
View Related
Aug 18, 2011
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
View 1 Replies
View Related
Aug 15, 2009
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
View 4 Replies
View Related
