Ubuntu :: Create An Iso Image In 10.04?
May 27, 2010I want to create an ISO file in brasero but it only lets me create a cue. What should I do
View 8 RepliesI want to create an ISO file in brasero but it only lets me create a cue. What should I do
View 8 RepliesI do not know if this is possible, but I have a laptop in another country that I visit quite frequently. I wish to re build it in Ubuntu from the image of a mcahine I have here such that when I set it up I need not go on line for updates and installed apps.
A couple of reasons for this.
Internet in this other country is by land line and VERY expensive and slow
It would be useful if it were an image as I am happy with the install on the laptop I have here,, and do not want to spend an age on my hols configuring and installing and playing about... Just install Ubuntu from my CD and then the image to create the same machine.....
Ok, have a system with 10.10 with the things I need, I installed this OS on a laptop which has a 40gb drive. 32-bit version. Before installing ubuntu i had Windows7 and had split the drive in 2 partitions (20/20) and currently have an image of the Windows7 OS in the 2nd partition.
Anyway, when installing ubuntu i used the 1st partition that has Windows7 OS and made 3 partitions out of it:
-12gb partition for /root
- 3gb partition for /swap
- 5gb partition for /home
In the Windows world i use Ghost utility(DOS version) to image my single Windows7 partition completely. This works fine.
Since in ubuntu we usually create multiple partitions,
1-what utility can be used to create an image of the partition ?
2-do you JUST create the image of /root ?
I really want to create an image now that i can then restore if something happens to the OS and be back in business quickly without reinstalling ubuntu from scratch.
I want to create a image of a partition using dd. The partition is 80GB but only 15 GB are used. I booted from a live CD and run this command to backup 20 GB
Code:
dd if=/dev/sda1 of=/mnt/backup/OLD_HDD/sda1.img bs=1M count=20480
The command finishes without problems but when I mount the image I'm cannot read the content :
Code:
# mount -o loop /mnt/backup/OLD_HDD/sda1.img /mnt/sda1/
# ll /mnt/sda1/
ls: cannot access /mnt/sda1/proc: Input/output error
ls: cannot access /mnt/sda1/usr: Input/output error
[code]....
is it possible to make an image of my current installed os and settings ,and burn it to a dvd so that i can just install it on other machines without installing all my programs again?this can be done with windows xp discs. you can intregate drivers and software onto the installation cd. is it possible with ubuntu? and how do you do it?
View 4 Replies View RelatedI have been trying to create a windows 7 system image, for days, using standard win7 tools. I am officially giving up, in frustration. FWIW: I have gained an even deeper respect for Ubuntu, and even more contempt for Microsoft. My tools and setup:
Desktop:
AMD II Quad-core 64-bit, 3ghz, 4gb ram
1TB of disk space, less than 100GB used
Ubuntu 10.10 64-bit (I didn't like 11.04)
Laptop:
HP G62
Intel i3, dual-core, 3ghz, 4gb ram
500GB of disk space, less than 100GB used
Windows 7 Premier 64-bit
I have a few external HDDs: 640GB, 120GB, and an old 80GB. Also several thumb drives. The desktop, and laptop, are on the same network. Please just point me in the right direction. Do I use NTFSClone, or something else? Also, I would like to dual-boot the laptop with unbuntu, but if that's too difficult, never mind.
Is it possible to create ONE iso image on 2 CDs ?I have a very old version Windows XP which installer is on 2 disc. I need to create an ISO image on them. If possible, please advise which command shall I run, dd ?
View 2 Replies View RelatedI just downloaded the FEDORA iso image file. Naturally, the next step is to create a DVD. The problem is I'm using a mininetbook hith no DVD unit and I have not an external one, so I think I can use the USB as an alternative, but I just don't find how to in the documentation, and the applications to burn DVD's dont have the option... how can I do this?
View 14 Replies View RelatedI have an HP C7000 chasis with 5 blades. We have a known good, secure version of RHEL 5.6 on one of the blades. My question is, can I make a "golden iso image" from that running o.s. to install on 2 of the other blades? If so, how can I do that?
View 7 Replies View RelatedAfter upgrading to Lucid RC I notice that I cannot create a CD image anymore. Brasero gives me three options : two .toc and one .cue file format but neither of them work the CDDAO variant of the .toc format gives me a notification that i need to install some extra packages but even after installing those, the image creation hangs. I used to be able to create .iso images but that option has completely gone...
View 4 Replies View Relatedcreate bootable usb from windows vista.iso image.I have used unetbootin and imagewriter so far and no booting.
View 1 Replies View RelatedBasically, I want to be able to create the perfect disk image of a CLEAN Ubuntu installed in a 30 gb partition. The problem is, if I install Ubuntu, then some drivers are installed automatically. I am using an old computer at the moment (my main is back at home) and I want to be able to create an image so that when I restore that image onto my main computer, it is not cluttered with drivers of the old computer. Is there a method that can be used for uninstalling drivers?
I am looking for the cleanest way to uninstall drivers, hopefully to the point where it will not leave any "residue" That is my first question. My second question (in general about disk image--I have never actually created nor restored an image): Can I create an image of partition A and restore the image on partition B? Basically, creating an image of one partition and restoring it on another partition. Or does it have to be restored on the original partition?
Also, what if it is the same scenario but partition B is a larger size? I know that if partition B is smaller, it cannot be done because the image is larger than the partition. Finally, can partition A be restored onto a different hard drive? I have yet to find answers of these questions on different forums in other sites (this is my 3rd try). I know that the Ubuntu community is extremely active and more than willing to share their knowledge.
I'm overall realitively new to Ubuntu 11.0.4 and I had some questions regarding this operating system. I just wanted to inform everyone, that I'm attempting to make a transition, from a life time Windows user and a current Windows 7 Ultimate user, to being a Ubuntu user.
I am becoming fedup with Windows 7, because i dislike how much system resources, it requires to run, and in addition I'm skeptical about Windows security. I had a lot of bad experiences with the Windows updates as well, so I was kind of alienated, as one can imagine. What I did like about Windows 7, is how easy it was, to configure the user group policies. I was wondering if you were able to do that in Ubuntu latest release.
I also was wondering, if it were possible, to create a hard drive image, that I can just load up, if I ever needed to reformat, like I did in Windows 7.
Well I've decided to move all my data from one VPS to another, and Iwanted to know if there was a way from within Ubuntu to make a full system image backup,ch I can then just transfer to the new Ubuntu VPS, and restore it there ..Unfortunately my VPS control does not have any working backup option right now, so I can only make the backup manually from within Ubuntu, if there is a way to do it
View 9 Replies View Relatedi have Ubuntu 10.04 installed on a virtual machine. i have made a modification and would like to create a CD of this running system.I guess i need to first make and ISO of the system and the copy to a CD. can anyone give guidance on the process to do this?
View 1 Replies View RelatedDebian 504 64-bit
How to create ISO image from .bin and .cue files?
I have downloaded a bootable DOS iso CD image that I have burnt to CD and can boot from.I need to add more disk checking utilities to the CD iso image.The DOS disk checking utilities are designed to be run from a floppy disk, but my laptop does not have a floppy drive, so CD-ROM is an alternative, if I can remaster the existing iso image file?Can I mount the DOS iso file and then add other programs to it, and then remaster the updated iso, and make a new CD-ROM to boot from with the added tools?
View 3 Replies View RelatedOk, so I have installed openSUSE 11.3 on my Lenovo Thinkpad T61p, setup the wireless adapter (why is this so difficult?) and installed a few applications. I do like the look of openSUSE but would like to check out a few other flavours. With my Windows 7 (can I say that here?) machines I can create a system image and a system restore CD with a fair amount of ease. Is there a similar process available for Linux?
View 5 Replies View RelatedI have fedora on a parition. the root / folder, and a swap. I wanna try other linux, but i dont want to delete my Fedora. So I want to back up my Fedora whole disk data, can I create a disk image for Fedora so that later I can Restore it?
View 2 Replies View RelatedI try to prepare Linux-based image for remote network boot via PXE. Do I need to create Swap for this PXE image? BTW the boot image will have about 300MB or less and we have P4/2GHz workstations with 1GB RAM.
View 3 Replies View Related(I tried to post this earlier and it got lost.) I have a Ubuntu ISO image that I downloaded with Slackware, the only system I have. Ubuntu does not tell how to make a bootstick using anything but Windows,Mac, and Ubuntu. I tried "dd if=...ubuntu... of=/dev/sdb bs=512" and it did not put anything on the stick. Is there a procedure for making such a thing?
View 8 Replies View RelatedHow to create the FS image and mount the same ..?
I need to store some data in the image which I'll be creating ..?
Can I use 'growisofs -dvd-compat -Z /dev/null' to create only the image to burn a dvd-video dvd from the VIDEO_TS, AUDIO_TS directory tree?
View 1 Replies View RelatedIs there any software that will create an image of my Hard Drive and put it on DVD as it is and if I had to reinstall I could use that image?
View 5 Replies View RelatedIs it possible to create a backup iso image of protected DVD using dd command?
View 6 Replies View RelatedI already download Fedora 15 from website As ISO Image , How I can create Bootable CD Image? and it possible but it in USB as bootable
View 3 Replies View RelatedI'm creating a squeeze image, it should be installed on about 20 workstations, the same PC's, but different monitors. create /etc/X11/xorg.conf, or is it better to prepare without?
View 2 Replies View Relatedi need to create new initrd image in sles10.2
View 1 Replies View RelatedI've performed a clean install of Linux on my system, and would like to create a snapshot of my whole disk so that I can go back to a fresh state immediately.
I used to use DriveImage XML and it was a FANTASTIC program, but unfortunately the boot CD containing it can only be created by having Windows installed. So it might be time to explore a new program that is equally simple and effective as that one.
I'd like your recommendations of imaging programs that are free, and that work off a boot CD/DVD (because the live backup thing generally takes much longer for imaging an entire disk).
One thing I liked about DriveImage XML was that it stored the backup in a fairly readable format, so if one day DriveImage XML were no longer available you wouldn't lose your backed up data. Any such programs?
Also, would these programs work for a drive that contains an encrypted root partition (i.e. enabling the encryption checkbox in the CentOS installation)?
How do I create/boot a ram image from a disk? I'd like to create a linux installation that is booted from a USB or CF drive and after boot does not access the disk.
View 4 Replies View Related