I have 1 HP Workstation xw4400 and 16 HP HSTNC-002L-TC. and I want to create LTSP for ubuntu(10.10 or 10.04.1 alternate). for important, I am begginer and I am not know ubuntu well.
View 4 RepliesIs the Ubuntu LTSP install still on the alternate CD as of Karmic? Or has it been moved (say, to the server CD)? Websites say it's on the alternate, but there's no way of knowing if they're up-to-date.
View 1 Replies View RelatedI've set up ssh passwordless logins using keygen etc.before so I know the routine.
The problem I'm currently having is setting passwordless logins when I don't have write permission to my "root" of the remote machine. More specifically the slice provided by a commercial web hosting provider. I can ssh and sftp just fine keying in the password manually but since I'm unable to create a .ssh directory in my "root" I'm unsuccessful in scripting logins. What I'm wondering is if the .ssh directory and associated security files can be placed in an alternate location such as the httpdocs directory and pass that location to ssh in a command line parameter.
is it would be possible create a Ubuntu dvd that contains the ubuntu server desktop and alternate install opptions, as well as all four main desktop environments (gnome, kde, xfce, lxde) and unity. since much of the data is redundant between each version cd's it would probably all fit on one disk. then all that would be needed is two disks one for 32 bit and another for 64 bit. i really think that this could work.
View 1 Replies View RelatedI have a Centos 5.5 system with 2* 250 gig sata physical drives, sda and sdb. Each drive has a linux raid boot partition and a Linux raid LVM partition. Both pairs of partitions are set up with raid 1 mirroring. I want to add more data capacity - and I propose to add a second pair of physical drives - this time 1.5 terabyte drives presumably sdc and sdd. I assume I can just plug in the new hardware - reboot the system and set up the new partitions, raid arrays and LVMs on the live system. My first question:
1) Is there any danger - that adding these drives to arbitrary sata ports on the motherboard will cause the re-enumeration of the "sdx" series in such a way that the system will get confused about where to find the existing raid components and/or the boot or root file-systems? If anyone can point me to a tutorial on how the enumeration of the "sdx" sequence works and how the system finds the raid arrays and root file-system at boot time
2) I intend to use the majority of the new raid array as an LVM "Data Volume" to isolate "data" from "system" files for backup and maintenance purposes. Is there any merit in creating "alternate" boot partitions and "alternate" root file-systems on the new drives so that the system can be backed up there periodically? The intent here is to boot from the newer partition in the event of a corruption or other failure of the current boot or root file-system. If this is a good idea - how would the system know where to find the root file-system if the original one gets corrupted. i.e. At boot time - how does the system know what root file-system to use and where to find it?
3) If I create new LVM /raid partitions on the new drives - should the new LVM be part of the same "volgroup" - or would it be better to make it a separate "volgroup"? What are the issues to consider in making that decision?
I work in a school and we plan to upgrade acquire 50 computers for the Laboratories. Can someone led me the way to setup diskless windows xp using ltsp or any alternative?
View 1 Replies View RelatedVersion 9.10 had been installed via the alternate CD as the LTSP Server Edition. In place upgrade to 10.4 completed normally via Update Manager. However, LTSP terminal boot now fails with error "Forbidden directory" and "Access Violation". The following was found . Ubuntu 10.4 uses tftp-hpa. Either this is a change from Ubuntu 9.10 or the default behaviour of tftp-hpa has changed. So now, the filename argument given in /etc/ltsp/dhcpd.conf must include the full pathname. The previous requirement was to exclude the chroot path. If this is documented somewhere, I missed it. And after modifying /etc/ltsp/dhcpd.conf, do not forget to restart the dhcp daemon $ sudo /etc/init.d/dhcp3-server restart
View 7 Replies View RelatedDoes anyone know how ltsp is supposed to load in a 10.04 Edubuntu install? The live CD worked beautifully, providing me with a gui under "applications/other" with which I could successfully test my thin clients. But once I actually installed Edubuntu (through the live CD), there was no ltsp configuration at all, the gui was gone and there was no visible way to install ltsp. There wasn't even an option in the DVD install routine the way there was in previous versions.
View 3 Replies View RelatedI just bought a old xeon server and am installing ubuntu 10.10 with ltsp, i have also bought 3 thin clients to add to it, what kind of hub or switch do i need to use with it? also is it straight through or crossover cat5 cables that i need? is there any good sites that i should look at for setting this all up, my end goal is to have educational stuff on them for my kids with internet enabled only at certain times, and have movies available from the server for them to watch.
View 1 Replies View RelatedI'm trying to set up a thin client to connect to an Ubuntu 10.4 64bit. The client itself is 32 bit.When booting the thin client, I get the following:
Code:
Begin: Running /scripts/init-premount...
No interfaces found! Aborting...
Done.
[code]....
My main worry is, obviously, the kernel panic.When booting 64bit machines (a laptop and a desktop), everything works fine, but when booting a 32 bit netbook or thin client, I get the above panic.
after i've upgraded to 10.4 and after i've upgraded LTSP the system gives me the following error:
[code]....
Is there someone who knows what I should do?
I've got a fresh install from the alternate CD. The thin client gets to the point where the screen fills with dots .........done, then it just sits there and does nothing else. No error messages or anything. I have a two nic setup that worked great on karmic and haven't changed any of the hardware around or anything. I'm at a loss as to what to do, I've reinstalled several different times fiddled with every setting I could think of and searched and read till my eyeballs are ready to fall out. It has become a matter of principle to me now and I refuse to go back to an earlier version.
View 1 Replies View RelatedI've installed LTSP on 10.04. I can get a couple of (fairly new) laptops to boot from this so all appears to be fine.
But my key goal is to get ASUS K8S-MX motherboard with sis 190 lan to boot so that I can set up a computer lab.
All seems to go well on boot but
When loading essential drivers, nothing seems to load and I get a done.
Then running /scripts/init-premount I get no interfaces found.
Then mounting root file system It starts Running /scripts/nfs-top and drops into kernel panic.
I installed in Virtualbox many times and the clients would not connect. The config of the dhcpd.conf was the problem.Now, Everywhere I kept reading it said I had to turn off my hardware routers dhcp. Thats wrong, I have it working with it on and with one network card. Heres the nuts and bolts. Dlink 4100 hardware router assigning address block 192.168.2.200-250 to pcs on the lan. Router is set to reserve and IP for the ltps server nic so it gets the same IP assigned every time from the hardware router. No need to force linux to an ip when it can be set in the router. Then installed LTSP from alt-cd. Once done, dhcp wont run because it conflicts with the hardware dhcp. Found out by trying to restart it and it said stop - Fail when it tried to stop it.
sudo /etc/init.d/dhcp3-server restart
So edit /etc/ltsp/dhcpd.conf.
sudo gedit /etc/ltsp/dhcpd.conf
Mine attached below: The subnet, as long as the 1st three numbers match the rest of lan setup it will work.(192.168.2.0), rest of my lan is 192.168.2.x. Now notice the range is a different block than the hardware dhcp server uses. So all thin clients that connect will be assigned something 192.168.2.100-150 and all hardware connected pcs will be assigned 192.168.2.200-250 from the hardware router. So no conflicts. Then for the domain name server, set it to the hardware router ip. My hardware router is 192.168.2.2. Set option router to the same as hardware router of 192.168.2.2 Nothing in my dhcpd.conf file is pointing to the ltsp dhcp server. Nothing else had to be edited in the dhcpd.conf Next hurdle I had, after any change of the dhcpd.conf, ip's might have changed and you have to reconfig the ssh and the image. run these 2 commands.
sudo ltsp-update-sshkeys
then
sudo ltsp-upadte-image
then
sudo /etc/init.d/dhcp3-server restart
Then thin clients/lan boot pcs all can connect after that.
I have since installed again at work in virtual box, booted from another vbox client and booted from a separate lan pc. Then installed again at home on AMD 3200 Athlon, 1 gig mem. Booted from my main pc PhenomX4, no problems. Pc's must have lan boot available in the bios or net boot available on the network card(most consumer add on cards do not). But most motherboard lan connection do.
#
# Default LTSP dhcpd.conf config file.
#
authoritative;
[code].....
I got myself a HP t5000 series Thin client to use on my LTSP 10.04. I changed the Bios to boot PxE. When i restart the thin client it asks for a DHCP and finds the LTSP-DHCP server all is good. Its got a IP address ok, the boot process starts. ok I get the Splash screen for Ubuntu. and all is going well. ok I no get a login screen. All is going very well. (As normal with Ubuntu). I can login all is good the login starts and i get the start up sound.But then where normally one would expect to get a desktop, one gets a login screen. Not knowing the full boot procses im not sure where to start to look. Knowing linux there would be a log file somewhere, that stores the LTSP Terminal Bootup/login process and would tell me where its stopping/failing.
The good news is that when i boot a fat client in all works ok and i an able to get in with a desktop.
I setup Ubuntu 10.10 (edubuntu) along with ltsp. I have an environment with a windows network (192.168.1.0) and a subnet (192.168.0.0) that the new terminal server is on. Everything seemed to be connecting properly, but when I attempted to boot the first client, I get the error message: "Cannot connect to NBD server".
View 1 Replies View RelatedI'm using Ubuntu 10.04, How can I install LINUX TERMINAL SEVER PROJECT to ubuntu & I want to know, Can I connect to Internet via 3g modem with LTSP & How can I share internet with thin client machines.
View 1 Replies View RelatedI want to been able to connect remotely via RDP protocol with a client (for example from work to house) and I found that I can use [URL... What packages I need to install, and how I configure it? I connect my laptop via wireless throught eth2.
View 4 Replies View RelatedIn Jaunty (9.04) I've setup a small (eleven-terminal) ltsp network at the local school. It handled around 6600 working hours with ease.
Now I've upgrade the server to Karmic Koala (9.10) and it just stopped working.
1) The clients have PXE NICs
2) They get the proper IPs from the DHCP server and respond appropriately to changes in the DHCP configuration files.
3) DHCP server also points the clients to
filename=/ltsp/i386/pxelinux.0
4) When the clients try to download the pxelinux.0 over tftp they just timeout
5) /etc/inetd.conf has an entry like
tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot
6) The file /var/lib/tftpboot/ltsp/i386/pxelinux.0 exists on the server
I'm lost at all these configuration files and protocols.
I just finished setting up a new computer lab at my kids school, using LTSP and 22 think clients connecting to Ubuntu.Everything is going beautifully, and I'm using static IPs and autologin so that when each computer is turned on it logs itself in with no userintervention. The problem is, when users go to the top right system menu and select "Shut Down", they are brought out to the login screen for a second and then immediately logged back in automatically to the Desktop. How should I be shutting down the thin clients?he only way to do it at the moment is to have everyone hold the power button down until the CPU shuts off, but it feels sloppy and unhealthy.
View 3 Replies View RelatedI've just installed Ubuntu 9.10 64bit on my new server and then built a 32bit image. When I try and boot my thin clients I get the following error on VT7:
Code:
mount: according to mtab, aufs is already mount on /
mountall: mount / [416] terminated with status 1.
mount: according to mtab, none is already mounted on /proc
mountall: mount /proc [409] terminated with status 1.
mount: according to mtab, none is already mounted on /sys
[Code]...
I'm setting up an application server for a small organization using Ubuntu 10.04 and LTSP. We built a machine with a quad core Athlon II, got a Gigabit swtich, and a couple Gigabit ethernet cards. I burned gPXE into a couple EPROMs and turned their old PIII and Duron systems into thin clients.
So far so good.
Now, I'm trying to set up a shared directory that two users in the same group can both read and write. Let's call it "/home/shared". I want to set UMASK to 007, so that by default, files are created readable and writable by user and group, with no permissions for anybody else. I changed a line in "/etc/profile" from "umask 022" to "umask 007". After rebooting the app server, the umask does appear to be 007 when you log in at the console. However, it doesn't seem to affect the terminals.
So I figured I needed to change it in "/opt/ltsp/i386/etc/profile". vi helped me out with that. Didn't make a difference in the terminals. Ok, I need to rebuild the image, so I did an "ltsp-update-image" and rebooted the terminal. umask is still 022. ???
I changed UMASK in "/opt/ltsp/i386/etc/login.defs" and rebuilt the image. No change. ??? I really don't understand why this isn't working.
How can I change the UMASK for users who log in on an LTSP terminal?
I am currently running LTSP on Ubuntu 10.04. It is a dual gig nic setup with 16GB of ram and dual AMD quad core 2.4s. I installed all the latest updates as well as likewise-open so we can use AD authentication. When testing the configuration in the lab, I boot 32 clients that successfully reach the login screen. Here comes the interesting part, I can log in, using all unique AD accounts, up to 22 clients. When I attempt to log in to the 23rd client LTSP hangs. If I restart a client it will retrieve an IP address, but TFTP will eventually time out. All of the clients are connected to a Gigabit switch along with the server so network speeds are not an issue. When I run system monitor it only shows 3.6GB of memory in use and the processors are all under 10% utilization. I have beating my head against this issue for 2 days .
View 1 Replies View RelatedI've successfully built my server, and any fat or thin client that I connect to it boots wonderfully, with great response. I've gone through this exercise because we need a more efficient way of testing computers before delivery to our customers. So, I'm trying to run Passmark's BurnInTest. I've run it before with previous versions (9.something, I think) and it worked well, but I needed to build a new server so we can test more computers concurrently, so I figured I'd get the latest release.
My problem occurs when I try to run BurnInTest - it must have root access to test the local USB, parallel, and serial ports, and the optical drive. For the previous iteration I used a script that dropped into a local xterm session, su'd to a root session, and called the BiT GUI. In this attempt, the same scripts, even when I single-step them manually, results in 'authentication failure' when the su is attempted.
I have enabled the root account and created a password for it in the chroot /opt/ltsp/i386, and rebuilt the image, multiple times, no joy. Using ctrl-alt-F1 I can log in as root, and using dmesg I can see the USB device register when I connect it, so as far as I can tell the root account is alive and well, just not available in a local xterm session for some reason.
I have been at this for what seems like forever but i am getting somewhere after many errors i got dhcp3 reading the file and everything is almost there but now i got an error i cannot figure out.first my config file
HTML Code:
shared-network local {
subnet 192.168.0.0 netmask 255.255.255.0 {
[code]....
In internets there are lot of successless stories installing ltsp on ubuntu 10.04. Most problems are in ndb, init scripts and somewhere else, which are hardly debuggable. It seems like ubuntu 10.04 has ltsp packages completely broken and abandoned. Have someone succeeded to install ltsp on 10.04 without hard brainfucking? Maybe it's better to install ltsp from scratch, or choose another distribution?
View 3 Replies View RelatedI upgraded my Edubuntu 10.10 LTSP server to 11.04 and I've lost my network. The server boots fine but none of the workstations connect. They start the boot process but hang-up as it starts to load the GUI.The screen on-which the computers hang displays Ubuntu 10.10.Do I have to manually update the LTSP image?
View 1 Replies View RelatedI want to install Ubuntu LTSP on top of an already existing system. However, I want to use a different DHCP and TFTP server. Do I simply just install 'ltsp-server-standalone' with apt and run 'sudo ltsp-build-client', stop the DHCP and TFTP server and stop them from starting automatically? Would I then just copy over the pxelinux.cfg/default file from /var/lib/tftpboot along with the initrd.img and vmlinuz images to the TFTP server?
Edit: Do I need to actually copy the whole /var/lib/tftpboot/ltsp directory over to the TFTP server?
I've been asked to investigate the possibility of using LTSP in our school to provide a more "real world" programming environment to our students. We have a Windows 2003 Server domain and no plans to change it.I've set up the LTSP server, joined the domain and everything seems to be working fine, I can login to the LTSP server with a student account.
The next thing I want to achieve is give the students access to their "My Documents" folder on the Windows 2003 server. Is it possible to have a student log on to the terminal server (who has never logged in before) and have it automatically mount their share on the windows server?
I've just set up an LTSP server, with all its clients on a separate subnet to my main network - the main network is 192.168.1.x, and the LTSP clients are all 192.168.2.x. My LTSP server has 2 NICs, one on each network, and is merrily forwarding normal IP traffic from the clients to the rest of the network. I have a client/server application that has a server on one machine, and clients locate and attach to it using multicast protocols. The server is on the main network, and any other machines on the network can locate and talk to the server quite happily. The LTSP clients, however, cannot - I assume because the multicast communications aren't being forwarded by the LTSP server. How I can get this working?
View 2 Replies View Related