I have been at this for what seems like forever but i am getting somewhere after many errors i got dhcp3 reading the file and everything is almost there but now i got an error i cannot figure out.first my config file
HTML Code:
shared-network local {
subnet 192.168.0.0 netmask 255.255.255.0 {
[code]....
I installed dhcpd using:
Code:
Now when I try to run it, I get this weird error:
Code:
The error was:
I changed permissions to 777:
Code:
To no avail!
It's got something to do with AppArmor.
I don't think it is installed on this system:
Code:
ver: 9.10 how do I restart dhcp3 after changing dhcpd.conf?
View 3 Replies View Relatedwhen i want run "ltsp-build-client" command i get this error: ERROR: fc14 is unsupported i want know there is any plan for ltsp 5.2 support in fedora 14 and how i can solve this problem for use ltsp in fedora 14.
View 2 Replies View RelatedI want to display the associated host name with each address.
I've found the /var/lib/dhcp3/dhcpd.leases file, but it appears to have an entry for every time a lease was issued so it's hard to tell which ones are currently active.
Ubuntu 10.10 w/ dual NICs
here's my etc/network/interfaces file code...
Here's the problem -- DHCP wont start and throws the error "Can't create PID file /var/run/dhcpd.pid: Permission denied." Somewhere I found a post that indicated that the following corrected the issue (I dont really know why):
ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid
dhcpd3 -cf /etc/dhcp3/dhcpd.conf eth1
When I do the above DHCP will start (in theory, at least no erros are thrown). But if I ask DHCP to restart, it will stop, but not restart. And the error is "No subnet declaration for eth1 (192.168.3.2)"
I'm newbie-ish. Help me Obi-Wan Kenobi.
I been trying to set up a DHCP3-server on my brand new learning Ubuntu 11.04 server. I can connect when i put the IP infomation in manually, so I know everything else is working, just got to fix the DHCP problem before I put the machine into production on my home LAN. Can someone tell me if these config files located at /etc/dhcp3/dhcpd.conf and another at /etc/default/dhcp3-server are correct? eth1 is the NIC that will be the LAN side of the network, I double checked that...
Code:
/# A slightly different configuration for an internal subnet.
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.10 192.168.10.200;
option domain-name-servers 8.8.8.8, 8.8.4.4;
option domain-name "linuxrouter.local";
[Code]...
Version 9.10 had been installed via the alternate CD as the LTSP Server Edition. In place upgrade to 10.4 completed normally via Update Manager. However, LTSP terminal boot now fails with error "Forbidden directory" and "Access Violation". The following was found . Ubuntu 10.4 uses tftp-hpa. Either this is a change from Ubuntu 9.10 or the default behaviour of tftp-hpa has changed. So now, the filename argument given in /etc/ltsp/dhcpd.conf must include the full pathname. The previous requirement was to exclude the chroot path. If this is documented somewhere, I missed it. And after modifying /etc/ltsp/dhcpd.conf, do not forget to restart the dhcp daemon $ sudo /etc/init.d/dhcp3-server restart
View 7 Replies View RelatedI got myself a HP t5000 series Thin client to use on my LTSP 10.04. I changed the Bios to boot PxE. When i restart the thin client it asks for a DHCP and finds the LTSP-DHCP server all is good. Its got a IP address ok, the boot process starts. ok I get the Splash screen for Ubuntu. and all is going well. ok I no get a login screen. All is going very well. (As normal with Ubuntu). I can login all is good the login starts and i get the start up sound.But then where normally one would expect to get a desktop, one gets a login screen. Not knowing the full boot procses im not sure where to start to look. Knowing linux there would be a log file somewhere, that stores the LTSP Terminal Bootup/login process and would tell me where its stopping/failing.
The good news is that when i boot a fat client in all works ok and i an able to get in with a desktop.
I setup Ubuntu 10.10 (edubuntu) along with ltsp. I have an environment with a windows network (192.168.1.0) and a subnet (192.168.0.0) that the new terminal server is on. Everything seemed to be connecting properly, but when I attempted to boot the first client, I get the error message: "Cannot connect to NBD server".
View 1 Replies View RelatedI want to been able to connect remotely via RDP protocol with a client (for example from work to house) and I found that I can use [URL... What packages I need to install, and how I configure it? I connect my laptop via wireless throught eth2.
View 4 Replies View RelatedIn Jaunty (9.04) I've setup a small (eleven-terminal) ltsp network at the local school. It handled around 6600 working hours with ease.
Now I've upgrade the server to Karmic Koala (9.10) and it just stopped working.
1) The clients have PXE NICs
2) They get the proper IPs from the DHCP server and respond appropriately to changes in the DHCP configuration files.
3) DHCP server also points the clients to
filename=/ltsp/i386/pxelinux.0
4) When the clients try to download the pxelinux.0 over tftp they just timeout
5) /etc/inetd.conf has an entry like
tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot
6) The file /var/lib/tftpboot/ltsp/i386/pxelinux.0 exists on the server
I'm lost at all these configuration files and protocols.
I've just installed Ubuntu 9.10 64bit on my new server and then built a 32bit image. When I try and boot my thin clients I get the following error on VT7:
Code:
mount: according to mtab, aufs is already mount on /
mountall: mount / [416] terminated with status 1.
mount: according to mtab, none is already mounted on /proc
mountall: mount /proc [409] terminated with status 1.
mount: according to mtab, none is already mounted on /sys
[Code]...
I am currently running LTSP on Ubuntu 10.04. It is a dual gig nic setup with 16GB of ram and dual AMD quad core 2.4s. I installed all the latest updates as well as likewise-open so we can use AD authentication. When testing the configuration in the lab, I boot 32 clients that successfully reach the login screen. Here comes the interesting part, I can log in, using all unique AD accounts, up to 22 clients. When I attempt to log in to the 23rd client LTSP hangs. If I restart a client it will retrieve an IP address, but TFTP will eventually time out. All of the clients are connected to a Gigabit switch along with the server so network speeds are not an issue. When I run system monitor it only shows 3.6GB of memory in use and the processors are all under 10% utilization. I have beating my head against this issue for 2 days .
View 1 Replies View RelatedI've successfully built my server, and any fat or thin client that I connect to it boots wonderfully, with great response. I've gone through this exercise because we need a more efficient way of testing computers before delivery to our customers. So, I'm trying to run Passmark's BurnInTest. I've run it before with previous versions (9.something, I think) and it worked well, but I needed to build a new server so we can test more computers concurrently, so I figured I'd get the latest release.
My problem occurs when I try to run BurnInTest - it must have root access to test the local USB, parallel, and serial ports, and the optical drive. For the previous iteration I used a script that dropped into a local xterm session, su'd to a root session, and called the BiT GUI. In this attempt, the same scripts, even when I single-step them manually, results in 'authentication failure' when the su is attempted.
I have enabled the root account and created a password for it in the chroot /opt/ltsp/i386, and rebuilt the image, multiple times, no joy. Using ctrl-alt-F1 I can log in as root, and using dmesg I can see the USB device register when I connect it, so as far as I can tell the root account is alive and well, just not available in a local xterm session for some reason.
In internets there are lot of successless stories installing ltsp on ubuntu 10.04. Most problems are in ndb, init scripts and somewhere else, which are hardly debuggable. It seems like ubuntu 10.04 has ltsp packages completely broken and abandoned. Have someone succeeded to install ltsp on 10.04 without hard brainfucking? Maybe it's better to install ltsp from scratch, or choose another distribution?
View 3 Replies View RelatedI upgraded my Edubuntu 10.10 LTSP server to 11.04 and I've lost my network. The server boots fine but none of the workstations connect. They start the boot process but hang-up as it starts to load the GUI.The screen on-which the computers hang displays Ubuntu 10.10.Do I have to manually update the LTSP image?
View 1 Replies View RelatedI want to install Ubuntu LTSP on top of an already existing system. However, I want to use a different DHCP and TFTP server. Do I simply just install 'ltsp-server-standalone' with apt and run 'sudo ltsp-build-client', stop the DHCP and TFTP server and stop them from starting automatically? Would I then just copy over the pxelinux.cfg/default file from /var/lib/tftpboot along with the initrd.img and vmlinuz images to the TFTP server?
Edit: Do I need to actually copy the whole /var/lib/tftpboot/ltsp directory over to the TFTP server?
I've been asked to investigate the possibility of using LTSP in our school to provide a more "real world" programming environment to our students. We have a Windows 2003 Server domain and no plans to change it.I've set up the LTSP server, joined the domain and everything seems to be working fine, I can login to the LTSP server with a student account.
The next thing I want to achieve is give the students access to their "My Documents" folder on the Windows 2003 server. Is it possible to have a student log on to the terminal server (who has never logged in before) and have it automatically mount their share on the windows server?
Server is 10.04 server edition
[code]...
soon kernel panics. What else to fix here?
I have been working/implementing LTSP based thin clients now using Ubuntu 10.04 LTS 32bit server. I intend to change the default purple Ubuntu splash. I have already removed the "quiet splash" parameters in the pxeconfig file. And it works, giving me a text boot. But what i needed was a replacement for the splash.
View 1 Replies View Relatedafter i've upgraded to 10.4 and after i've upgraded LTSP the system gives me the following error:
[code]....
Is there someone who knows what I should do?
I have recently installed an ltsp system, client and server. Everything works except i cannot get my client side serial ports to work or register for that matter. Can anyone point me to the steps i should take to get these working.
View 1 Replies View RelatedI've installed apache2 and and when i access my URL from outside using www.proxy-ervice.de i just get a webpage with Index of /so i've run the command sudo gedit /etc/apache2/httpd.conf which give me the error: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file'/root/.local/share/recently-used.xbel.2EUJVV': No such file or directory(gedit:2509):Gtk-WARNING **: Attempting to set the permissions of`/root/.local/share/recently-used.xbel', but failed: No such file or directorymy httpd.conf is as follows,Userdir public_htmlOptions +IndexesOptions AllServerName localhost
<Directory "/home/gav/public_html/">
Order allow,deny
Allow from all
[code]....
I have setup Ubuntu 9.10 ltsp server, and have the client connected with login screen. I can log on the client successfully , but I did not get to the window environment, just see a busy mouse pointer on client screen and the screen of the server is scrambled ... and not viewable. I built the image by ltsl-build-client The server is amd64 version and the client is i386 version.
View 1 Replies View RelatedI am trying to install and configure LTSP on a server for a HP thin client to boot off. The version of Ubuntu that I am using is 11.04 x86 and it is a fresh install on a dual core system with 2GB RAM. I followed a guide which comprised of these commands.
sudo apt-get install ltsp-server-standalone openssh-server sudo ltsp-build-client or if your on a 64-bit system with 32-bit machines do sudo ltsp-build-client arch i386 for editing the servers IP values use /etc/ltsp/dhcpd.conf after that you need to restart DHCP server sudo /etc/init.d/dhcp3-server restart
and update sshkeys -sudo ltsp-update-sshkeys and if you updated dhcpd.conf then you need to update you image also by typing in terminal ltsp-update-image
Everything seemed to install as it should but when I try to boot from the thin client it just times out and says no DHCP or proxy invites received. I turned DHCP off on the router and even tried another router, but I still get nothing. I am at a bit of a loose end and I hope someone on here can point me in the right direction of where I am going wrong.
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View RelatedI successfully shared a subdirectory of my home directory, using GNOME under Ubuntu 8.04 LTS Desktop. What drives me crazy is that I can't find this directory listed in /etc/samba/smb.conf, in a "path" line. Please tell me where is this directory specified, since smb.conf seems to be the only samba config file.
View 5 Replies View RelatedI tried to setup a dyndns, and ever since I tried to get that setup, I can't access my webmin, or access /etc/hosts/resolv.conf. But I can still access my samba shares I had created before this happened.
View 5 Replies View RelatedAny changes in the way httpd.conf works in 9.04Yesterday I updated from 8.04 to 8.10 and then to 9.04. All works fine, except for Apache Virtual sites.I had several defined in my httpd.conf file, which I used for testing clients' websites.ince the upgrade the virtual sites are not recognised, and all access is done at the original level /var/wwwAny changes in the way httpd.conf works? checked the Apache docs, but found nothing.Here's the httpd.conf I've been using:
<Directory /var/www/clientname/htdocs/products>
AllowOverride All
</Directory>
[code]....