Ubuntu :: Converted Flac To MP3 But Can't See File In Zen Player
Oct 25, 2010
I used Sound Converter to convert a few artists tracks from flac to mp3. I've done this successfully in the Windows environment many times. Now when I go to play the tracks on my Creative Zen, they are not there but when I look at the tracks that I transferred over, in the file window, they are there and they are MP3's but my Zen isn't recognizing them. What's going on? All other artists that aren't converted MP3s are fine.
View 4 Replies
ADVERTISEMENT
Jul 4, 2010
This is my main problem, I have some .mp4 videos and want to play it on a regular DVD player, but when I converted it, using avidemux, the DVD player doesn't even know the video is on the USB drive.
I encoded this videos on .mp4 to save some space, but now I need it on .avi.
View 4 Replies
View Related
Oct 3, 2010
I just installed Ubuntu on a net book. I'd like hook it up to my car's aux jack and use it to play FLAC files in my car. Is there a an media player that would be good for that? If I could set multiple hot keys I could set one side of the key board for forward and back.
View 3 Replies
View Related
Jul 26, 2011
there is any way (via terminal or gediting a file) to use .flac files instead of .ogg in a sound theme file? I am creating a sound theme (several truthfully) and I would like to use the FLAC format if possible.
View 5 Replies
View Related
Aug 16, 2010
Kernel 2.6.21.5, GNU (slackware 12.0).
KDE 3.5.7
K3b 1.0.2
I have a FLAC file with 24-bit samples instead of 16 bits. I could use the flac linux command to obtain a WAVE file and then cdrecord to burn the audio CD. Unfortunately, cdrecord requires 16-bit digital audio as input. Is there a program able to author 24-bit audio CDs either from a FLAC file or from a WAVE file?
View 9 Replies
View Related
Nov 20, 2010
How do you convert a flac file to mp3? Well I have an entire album to convert actually.
View 5 Replies
View Related
Mar 24, 2010
I converted all of my vinyl to flac format, but when I played them in mplayer, the volume was way lower than the mp3's that I downloaded. So, when I have them all in the playlist, I'll have my flac file at a good volume, then an mp3 comes on and blasts me. Is there a command line program that I can use where I can specify a new volume for the flac files? I wanted a command line program so that I can script this entire process. I do not want to sacrifice the quality of the songs that I encoded (at 96kHz).
View 2 Replies
View Related
Sep 14, 2010
If I open hard drake the player is listed as a USB device. I have been advised to drag files in to the USB storage device but am clueless to where to drag them to.
View 1 Replies
View Related
Mar 7, 2010
There are quite a few threads in this forum on how to convert a DJVU file into a PDF (among which this thread the instruction of which I followed.) I converted a DJVU file by printing it to a PS file from the Document Viewer. Then I printed again the PS to file into a PDF from that same application. The second phase took more than 24 hours and resulted in a scanned PDF of less than 500 pages with a size of 315 MB! I have many books of more pages which come down to 1 MB only. What happened in the process to make it so damn slow and so inefficient? Is there a good alternative (not ps2pdf because it provides the same result)?
View 1 Replies
View Related
Mar 28, 2010
I would like to know how to convert a vob or a mpg file to a flv file using VLC Media Player.
View 9 Replies
View Related
Apr 30, 2010
Where can I find a list of services converted to upstart in Ubuntu 10.04? What is the syntax for stopping, starting and restarting these services?
View 6 Replies
View Related
Jun 25, 2010
I used the script mentioned here [URL] to convert some wma files to mp3 however rhythmbox will not import these. Is this to do with the way they were conveted? Is there a better way or will converting wma to mp3 always result in this? Was going to try soundconverter but I wasn't sure if this would just do the same thing.
View 7 Replies
View Related
Aug 18, 2010
1) Is there an existing substitute for this theme for GNOME and Metacity?
2) If not, is there a way to convert Windowblinds themes into the GTK2.0/Metacity format?
I did some searching for the first question for him, and haven't found any that are very close or that work well. To be honest, I haven't even found one that looks remotely like it. I do have to say, however, that I myself am interested in the second question. Is there a way to convert a Windowblinds .ZIP or .WGA archive to the format of GTK2.0/Metacity? In doing some looking around, I am certain that with a LOT of work, I could port the Windowblinds theme into GNOME, using some image editing and file movement. But is it really necessary?
View 8 Replies
View Related
Dec 3, 2010
I recently ran into a problem though. using mav. meerkat I have figured out how to rip dvds using acid rip, medibuntu and some ..... tutorials. Then I tried to put them on my ipod using gtkpod. when this did not work I did some research and realized the video files needed to be converted. At first I tried avidemux, it seemed to work but when i put them on my ipod (video white 80 gb) I tried to play them and the screen just went black and several seconds later was sent back to the menu. Then I tried winnff, but there was no ipod preset only a rockbox ipod preset which I tried with the same result. I then tried openshot using these parameters -ipod libx264 libfaac 1.25 Mbit/s -> 1.5 Mbit/s 128 kbit/sto160 kbit/s Quarter Square NTSC 320x24029.97HzAVCHDQuicktime 7Still same result. I have gotten purchased mp4 videos to work using gtkpod, so I am assuming it is a conversion problem. Also the converted mp4 I made using openshot plays fine on banshee player
View 9 Replies
View Related
Sep 10, 2010
I have many home movies that I converted from VHS tapes to AVI files. I have it setup where I can watch it on my TV, but my hard drive is getting full because of size and quantity of AVI files. What I would like to do is make a file server to house all of these movies, but I have a couple of P4 2.0GHZ processor and couple 160GB Hard Drives. I would like to know if I can combine multiple computers and create a cluster or private cloud, combine the hard drive and processor power and set it up that way...in a sense a massive powerful file server. I am thinking of expanding this to include my word documents and pictures as well.
View 7 Replies
View Related
Mar 4, 2009
Hi am using winff, as converting video is a mystery to me. I have several avi files well about 26 of them. at about 8gb. now i have to convert them into avi again! so my divx dvd machine can read/play them.
I was wondering if I could compress them so they'd fit onto one dvd?
at present I select the 16:9, would the anamorfic be smaller? would it expand properly on my cheep divx dvd machine? I don't mind using the command line.
View 1 Replies
View Related
Jul 29, 2010
I switched over from Windows to Linux. I have an external drive that has basically just media files on it. Are there any advantages to converting this to ext3, or should I just leave it as ntfs3?
View 2 Replies
View Related
Jun 10, 2010
I have enabled IP Forwarding in my linux machine by using the commandsysctl -w net.ipv4.ip_forward=1. But I dont see any difference in routes when I type the route command before and after changing this value.Do you guys have any solution to verify the packet forwarding, but using this single linux machine only? Of course, I verified the net.ipv4.ip_forward=1 value. But I need to verify by transmitting orreceiving packets
View 3 Replies
View Related
Oct 27, 2010
how well does rpm2tgz work? do the packages converted always work correctly? or is it hit-and-miss like with alien?
View 8 Replies
View Related
May 10, 2010
I'm trying to convert my flac files to mp3 to play on my portable player, however it is not appending the tags that are on the flac files to the converted mp3 files. However, I thought that pacpl was supposed to support this.
View 2 Replies
View Related
May 9, 2011
Installed Gnome 3 on my OpenSuse 11.4 KDE laptop. Got two monitors, the built in monitor and the external. Under KDE the second monitor works fine, shows up as VGA1 and can be configured to work as an extended monitor, etc. Under the new Gnome 3 install the monitor shows up in the settings dialog but the monitor itself always says 'no signal' regardless of the configuration I use.
Hardware:
Lenovo R500 running OpenSuse 11.4 64-bit (originally with KDE4 desktop)
4 Gigs ram, built-in Intel video card.
Again, configuration under KDE works fine but under Gnome 3 I don't get a signal to my second monitor. Haven't located any other threads covering this kind of behavior but Google searches indicate that early versions of Gnome 3 had multi-monitor problems.
View 1 Replies
View Related
Sep 1, 2010
I create pdf files, from postscript files created by windows printer drivers:
/usr/local/bin/ps2pdfwr "$PSFILE" "$PDFFILE"
All the pdf files created this way seem to be empty, i.e. no text is rendered by Adobe Reader on the display, if the original document only contains TimesNewRoman font. However, if the document also contains any other font (e.g. Arial), then the whole document will be converted correctly, including TimesNewRoman, and also the other font(s).
In both cases, the following font is in the pdf:
Type: Type 1
Encoding: Custom
Actual Font: TimesNewRomanPSMT
Actual Font Type: True Type
For the time being, I have not found a way to create pdfs that are correct in all respect by ghostscript.
View 3 Replies
View Related
Dec 23, 2010
I have a BASH shell script with embedded SQL script. The SQL script fetches the data from oracle server and the data contains more than 8 spaces in the value (eg, 28051630 A) and the data is written to flat file using the below syntax:
$ORACLE_HOME/bin/sqlplus -s ${CONNECT_STRING} >${out_file} <<!!
.. sql query..
!!
The problem is that whenever the data is written to ${out_file} spaces are getting converted to TAB character
eg, 10 spaces (in Oracle) converted to 1 TAB and 2 spaces 7 spaces (in Oracle) converted to 1 TAB and 1 space Also, from above example you can see the width of TAB char is not constant (8 in first example and 6 in second example) Is there any way that I can stop shell script to convert spaces into TAB character as I want the data as it is from Oracle DB (i.e. only spaces not TABs)
View 3 Replies
View Related
Aug 18, 2011
To force myself to use CLI all the time, I've installed Ubuntu Server edition on my work laptop. However, I still want to be able to view PDF ( rendered as normal PDF, not converted to text ). Basically I want a totally CLI environment, except for PDF viewer.
View 1 Replies
View Related
Nov 30, 2010
I have read where C is first converted to Assembly before its final compilation to binary. Is there a way to do this with Bash commands? I would like the understanding that Assembly allows to Bash somehow.
View 14 Replies
View Related
Jul 25, 2011
I want to generate HTML files in batch to show some gvim colorschemes in action. I took my current solution from the script at but this will open open a gvim window for each colorscheme I want to process. So far, the only way I have found to avoid the annoying new windows that pop up every second is to start a VNCserver and set the DISPLAY environment variable to that of the VNCserver so that all gvim windows are sent to the display within the VNC session.However, I would like to know if there is a way I can avoid the whole VNC setup and just run a headless gvim instance that does the conversion and exits, with no windows ever being actually displayed.
View 1 Replies
View Related
Jan 14, 2011
I've got a 1920x1080 video I've edited and rendered with Cinelerra, and I'm trying to use ffmpeg to transcode it to something smaller. However, when I use a command like this, for instance:
Code:
I inevitably get some weird green band at the bottom of the frame in the converted video. I know that there's some weird pixel stretching going on here, because the NTSC standard for 16:9 is 720x480 with rectangular pixels, and the 1080 version has square pixels, so I'm guessing the green band is an artifact of that process?
View 2 Replies
View Related
Feb 5, 2010
I tried playing a .avi file using VLC player and Movie Player, but neither will read the file. There is no image or sound. I will post the error message shortly.
View 8 Replies
View Related
Nov 28, 2010
Yesterday, the file system of my mp3 player went corrupt. So I tried to format it to vfat, which in the past hasn't solved the problem and instead just made another corrupt partition. I have fixed it before by using dereks boot and nuke (dban) and filling it with only zeros so its ready to be repartitioned.
Now this time I tried to save some time by using dd instead of dban.
So I did dd if=/dev/zero of/dev/sdb
The process got interrupted by my system shutting down after about 15 min.
Now when I plug in my usb, it doesn't get recognized. It doesn't show up in gparted or fdisk. I looked at dmesg and all it gave was: usb 1-4: new high speed USB device using ehci_hcd and address 5
View 1 Replies
View Related
Jan 1, 2010
Okay running on 64bit karmic 9.10 i have been trying to get this .ts file to play nicely on vlc, but no success of getting it work nicely what so ever. It actually starts under VLC and gives image and sound but not the way i would prefer it. I don't quite get it but when i start it with vlc it actually displays it with lower resolution this is HD file, as its a stream capture from tv but it outputs it with much smaller resolution about 320 x 180. Tried it with other players too but the only one that accepted it nicely was xine "but problems ahead again" it outputs no sound? the image though was and is what it should be.
Tried it with Totem too and it did accept it too actually "hurray! but with the same symptoms as VLC + it doesn't output any sound out from the file only the image is what gets generated out from the player. I ran VLC from the terminal and it outputs following data when i start to play the file:
[Code]...
so if any ONE knows what should i do, feel free to step up and advise me would be appreciated (thanks in advance) If this has value if's mpeg2 ts file. And no...the file ain't corrupted that much i know, but what could generate this problem. If it ain't broken? Seeking works nice etc... except the low resolution display.
View 2 Replies
View Related
