Ubuntu :: Com32 Error When Making Startup Disk?
Jan 7, 2011is this a bad copy to my flash drive error or a bad iso altogether?
View 1 Repliesis this a bad copy to my flash drive error or a bad iso altogether?
View 1 Repliesi am trying to make it so that my laptop that has crashed can run Ubuntu. It lacks an optical drive (CD Player) so i am trying to use a USB. After i downloaded the ISO, and then use the extractor like it says here I then went into the flash drive, went to [usb-creator.exe] The problem is that when i try to do this (make the USB the Startup disk) the iso refuses to load on the application, its hard to explain, but here's a picture. Even when i go to click other, browse for the ISO, and open that one, it still doesn't work.
View 3 Replies View RelatedI'm trying to make a bootable USB disk by using syslinux. The USB disk is recognized as /dev/sdc.
#mkdosfs -I /dev/sdc
#syslinux /dev/sdc
After executing the above two commands, it generates errors as follow:
end_request: I/O error, dev sdc, sector 32
printk: 21 messages suppressed.
Buffer I/O error on device sdc, logical block 4
Buffer I/O error on device sdc, logical block 5
... ...
Buffer I/O error on device sdc, logical block 12
Buffer I/O error on device sdc, logical block 13
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View RelatedI'm trying to make start up disks of 10.04 of x86 and x64. I have downloaded the iso twice for both of them and have used multiple flash drives. I keep receiving an error that says the com32 image is bad. Anyone else have issues with this or any ideas on how to fix it so I can get a proper installation going?
View 2 Replies View RelatedI'm having difficulty making Autokey start at startup. I use the startup applications utility but don't know how to use it properly. I guess that I'm supposed to navigate to Autokey's executable but don't know where that is or if it exists because I don't understand the file system.
View 2 Replies View RelatedI cannot figure how to make a program start-up when Ubuntu boots. I want the "sudo firestarter" command to run so the firestarter icon appears in the panel.
View 7 Replies View RelatedI have to use pppoe because my ISP uses service names, and as far as I know the only program which lets me input a service name is pppoe (inside the pppoe.conf file). Networkmanager is buggy because it tends to disappear from the panel periodically and, worse, it doesn't reconnect (although the option is selected, it does reconnect only once).
So, for peace of mind I open a superuser terminal and enter "pppoe-start" and "pppoe-stop" to have everything I want (reconnects automatically, etc.). Now the question is: how can I have pppoe-start run at startup, automatically, without entering superuser mode, and without having a terminal open for this? Using Debian Testing (Wheezy).
Do you know if you can burn (or mount - whatever) Ubuntu on a CD from Ubuntu, or must you do it with Windows?
View 2 Replies View RelatedSo I found many methods on google, but no one works. It seems that this one is THE Debian way.
Code:
### BEGIN INIT INFO
# Provides: mystartupscript
#[code]...
How to make a usb disk on key bootable?
View 3 Replies View RelatedI started getting errors about running out of disk space in root this morning. I hunted up what's taking all the space; var/log is 39GB (Ubuntu is installed on a 50G partition.) It's specific files that live in that directory, not subfolders. The files are:
kern.log = 11.6 GB
messages (plain text file) = 11.4 GB
kern.log.1 = 6.1 GB
[code]...
what is the procedure to make a bootable disk from ISO images downloaded from Red Hat Enterprise site?
View 8 Replies View RelatedThis is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies View RelatedI'm running Ubuntu on a USB startup disk I created on a USB stick for recovery purposes. I cannot use wifi on my netbook if I boot from he USB. Why is this? Is there any way I can make it work again? (wifi is fine when I boot normally)
View 2 Replies View RelatedThis utility doesn't work it won't format and won't boot the one time I got it working. Now it has broken my usb flash drive as gparted won't format it to anything . I tried the alternate unetbootin program and now it won't see the flash drive because the startup program trashed it. I still think the external usb devices is the most frustrating part of ubuntu and needs serious fixing. My new netbook install won't see any of my external drives.
View 3 Replies View RelatedThe Ubuntu Software Centre tell me I have Startup Disk Creator installed. But where is it? I cant see it anywhere on my system
View 5 Replies View RelatedI have a 1 tb external hard drive and I was trying to put a windows.iso on it with startup disk creator but everytime I would select the windows iso it wouldn't show up.
Some background:
- the disk images are from the reboot disks that came with my labtop
- I do not have access to windows
Edits:
Using gparted, I turned my external hard drive into a bootable and put both ISO disc on it. Once I plugged it in my labtop and turned my labtop on, I get an error messages that says "BOOTMGR is missing".
- I ripped the both ISO images from the 2 system recovery disc that I ordered from HP specially for my brand of laptop.
- My CD-ROM drive does not work, or else I would have just used the disc regularly
- The operating system currently on the labtop is Ubuntu 10.04
The program damage my external hard disk brand Western Digital of 1 TB and 3 partition of that disk. I'm deeply sad and hopeless... googling a little bit I found that this is and old problem, was my first try. I have a lot, of very important information, I don't even know if is this the right group on this forum to put my question.
View 6 Replies View RelatedI was attempting to create a bootable usb drive for a friend with Startup Disk Creator. I was certain I had selected the correct drive but apparently I had not, because when I clicked "format" it began to format sdb instead of sdc. Unfortunately, sdb was my external hard drive. In a panic i force quit the format window, as i couldn't see any other option.
Now, when i access my external hard drive all I see is 4 files with jibberish titles full of random symbols. When I right click the external drive it still says its ~70% full of data, so i guess everything is still there.. whether or not it is salvageable is the question. Is there anything to be done or is it beyond repair?
I have downloaded the Ubuntu 10.04 "Lucid Lynx" Minimal CD. I would like to use the Startup Disk Creator to put it on bootable USB. when I run the Startup Disk Creator and click on "other" to select the downloaded .iso, my selection is ignored and does not show in the "Source disc" list of the dialog box.Is there another way to create a startup USB from the minimal CD download?
View 5 Replies View RelatedI would like to put my ubuntu system (the one on my partition) in a usb drive, so that way I can take it everywhere I go. The reason for this is because all of the programs I have and the configuration I currently have in my ubuntu (I should say "macbuntu"). That is:
burg boot loader (I probably don't need this one!)
x system plymouth theme || also windows 7 original plymouth theme
mac4lin 1.0 aqua GTK theme and emerald theme
mac ultimate icon theme
mac4lin 1.0 cursor theme (working even with compiz)
gnome global menu
compiz packagers ppawith all the extra stuff
telepathy ppa for empathy, having all the extra stuff working
also win2-7-pack_v-9.1
And lots more stuff!
I don't want my personal documents though (text docs, music, videos, pics 'maybe few pics'), just configuration files and programs. Can this even be possible?...
I'm trying to use USB Startup Disk Creator. The problem is I can't find it! I mean it is installed on my system, the Software Centre shows that but it doesn't appear in Applications>Accessories or anywhere else I can see. So where the heck is it?
View 9 Replies View RelatedI'm trying to make a live USB of openSUSE from the 'startup disk creator' in Ubuntu. I wanna try it and see what it's like. As well as Fedora and gOS. As soon as the downloads for Fedora and gOS finish I'll try making the startup disk with 'startup disk creator' for each of those. But my problem is that I tried openSUSE and I select the .iso and it doesn't do anything.... I would imagine it should work with any old .iso, right? Or no? Can I only make an ubuntu startup disk with it?EDIT: Fedora doesn't work eitherEDIT again: Yea, requirements state that I can only make a USB startup disk of Ubuntu desktop edition
View 4 Replies View RelatedI have this problem across all my computers running Ubuntu (Lucid and Maverick installations). It works sometimes but it's hit and miss. Sometimes it will load up an iso no problem and i have a start up flash stick in no length of time. Other time's it will not load up an iso. I have tried formatting my flash drive these times but it doesn't make a difference as the drive is always recognised by the program yet i sometimes can't load an iso. When this happens i find that i generally have the same problem at the same time on my other Ubuntu installations. I find it weird. Anyway it's very frustrating when i come across another distro that i really want to try out and i cannot load the iso in the program.
View 3 Replies View RelatedI often run various computers from my Ubuntu 10.04 USB startup disk. Every now and then, people get interested and want a copy of their own. Since I have installed a few extras (VLC, codecs, flash etc) on the disk, not just the out of the box 10.04, I would like to create a clone of the USB startup disk, to give away. How can it be done?
View 2 Replies View RelatedI have been an Ubuntu user for a few years now, and in the previous versions I have made numerous bootable USB devices, I always thought it was so useful, and I never have had any problems.I just installed version 9.10 the other day, and it seems to be working well, but the USB bootable disk creator is messed up big time.When i try to select an .iso image to add to the source disk image area, it is just unresponsive. And when i try to do something else, like format a USB device, it says i cannot format because the device cannot mounted. But i know its mounted because i can access the contents of the drive.Anyways this was a huge disappointment as I was showing a friend how useful the UBUNTU tools are, and it does this. Does anyone know anything about this bug?
View 9 Replies View RelatedSo i created a USB startup disk on my 32g flash. Worked fine until I went to update the packages on it. Now it wont boot up and it also fails when trying to install on another machine.
View 1 Replies View RelatedI am trying to create a bootable USB drive. I go to System > Administration > Startup Disk Creator and click on 'Other' as the image I want to use is not listed. I then find the Chrome OS image and double click but then I return to the Disk Creator and it is still not listed as the source disk.
So does anybody know how to get around this so I can use this program to create a bootable USB drive, or another way that I can create one? I have used the Disk Creator to create a bootable version of Jolicloud (which is probably one of the worst Linux distros out there) before, but now it won't work.