Now this is a bit odd but I have seen it happen before: after rebooting the clipboard icon is missing from the system tray. I am using KDE 4.* and karmic on the relevant machine. Any simple way to get it back without rebooting?
View 2 RepliesI'd like to have a Linux machine run what Windows users typically call a clipboard as a network service on my small LAN (about 10 machines). More specifically I am looking to have Linux run the clipboard service centrally in the LAN with both Windows and *nix machines able to connect to it as opposed to the peer-to-peer sync model that I am seeing in almost all of the applications I've discovered thus far.
View 2 Replies View Relatedi have some problem with my Maverick, his gnome panel (top panel) always missing after reboot, and I always type gnome-panel & to get back my gnome panel, get back my panel permanently?
View 1 Replies View Relatedi has follow website article to create a Ubuntu 11.04 on a 4GB flash drive. And, i has use "EASEUS Partition Master Home Edition" create 2 partition on my USB flash drive (2GB MBR with ubuntu 11.04, 2GB data volume). I has able to run my Ubuntu11.04 from USB and i was so happy and then start installed VLC player, Ubuntu Tweak, unrar programs. after those programs installed, i reboot the Ubuntu then i encounter all installed programs were missing,,,,the O/S back to it's original state. How am i can installed programs in USB flash drive and keep it on USB flash drive.
View 4 Replies View RelatedI use Linux Mint Debian XFCE and there was a large update (lots of programs) I have done prior to rebooting. After reboot, my computer can now no longer find the ethernet controller anymore in lspci, so my wired connection no longer works.
Is this a hardware issue? The green lights are all blinking fine though.
I've got an LVM2 VG containing 1 LV running on SLES11 SP1.
I have an entry in /etc/fstab to remount them at boot:
Code:
/dev/myVG/ibmLV /opt/IBM ext3 defaults 0 0
Whenever I reboot the whole VG disappears and I find the following in /var/log/boot.msg:
Code:
<notice -- Apr 15 12:35:55.954677000> boot.localfs start
Waiting for /dev/myVG/ibmLV . no more events
[Code]....
Installed Debian 8 Lxde desktop yesterday. All worked fine post install. Executed following two commands to make system up to date:-
Code: Select allapt-get update and Code: Select allapt-get upgrade
Switched off my system after using it for close to 3 hours. Today I booted my system and I could not see any GUI in action except mouse pointer. What I can only see is clicked on my camera and posted below for your review.When I get the login screen, I can choose different DE (fluxbox) and I was able to login and do some action. I don't know the reason for this sudden disappearance of desktop.
I'm NOT asking about clipboard managers like Glipper, Parcellite, GNOME itself should let configure clipboard behaviour: package "gnome-settings-daemon" includes "Clipboard management" - this is installed and running by default.[URL].. But - where I can make settings of clipboard ?
I have thing, in "gnome-control-center" - there are many applets, corresponding to gnome-settings-daemon plugins. But I can't find no clipboard setting. Where is it ? I remember, in past (maybe it was in KDE desktop (?)) I could set, if my X selections should be added to "ctrl-c" list and vice versa or not. This is what I need.
But once again - I do not ask about installing Clipboard managers. I'm asking - where is standard GNOME clipboard setting in Lucid.
Where in God's green earth does ubuntu put screenshots/clipboard related material? I've made like 5 screenshots but am totally unable to locate them. Great Scott! In windows I know where there at!
View 2 Replies View RelatedUsing the Screenshot in CompizConfig Settings Manager, can I copy the clipped screenshot to the clipboard right away? When I used <Super>Button1 to clip the screenshot, the image gets saved on the desktop and not on the clipboard. I would like to save some time and keystrokes by automating the "copy to the clipboard" I am using Ubuntu 10.04
View 1 Replies View RelatedI want to know how to access the clipboard in Open Office. I want to get to the things that I have put there by cutting or copying them so that I can re-paste. how to cut and paste one item at a time (and doesn't even mention copying!)
View 5 Replies View RelatedAnyone know of a clipboard manager that doesn't use the panel?
I want to access all my copys without the panel. I've looked into Glippy and Pastie. By playing with them for five minutes it doesn't seems possible for them.
I'd like a working clipboard manager/app. I have tried 2,but neither work:
Parcellite:
Runs but no window appears. ie appears in ps.
Glipper:
Installs but can't get on menu.
Just installed 10.10 32-bit on a Lenovo T61p laptop, and used Remote Desktop Viewer (version 2.3.2) to VNC into another system. I can copy from an application on 10.10 and then paste into a window in the VNC connection (e.g. to xterm or emacs), but I cannot do the reverse. When I try to paste, I get garbage displayed. For example, I selected "ls -l" from an xterm, which should have copied to the clipboard. When I paste this into an e-mail message, I get junk.
Here is what Emacs in hexl-mode says about that text:
7852 3109 05 xR1..
It shows as "xR1" some whitespace and then a tiny graphical box symbol with 00 and 05 in it. I'll try to paste it on the next line: Is this a known bug? Is there a workaround? Another app I can use?
xR1
This same VNC connection works fine, when I use 10.04.
I make use of the clipboard manager a lot, and have just replaced Clipman with ClipIt on my Debian 8 (Xfce) host. I also have a Debian 8 (and 7) VM with Xfce, but without xfce4-panel, so no taskbar. Is there a way to make use of a clipboard manager with no panel/taskbar? I have ClipIt installed on the 8 VM, but do not have obvious access to it. It's the last hurdle to eliminating the taskbar/panel for me...... meaning eliminating the taskbar, yet keeping all the functionality.
I started using Xfce without xfce4-panel, when I decided that Openbox was a little too spartan for me...... at least without spending a lot of time to customize it, which I probably will do eventually, but for now, I am staying with Xfce.
I want to use system clipboard of vim in the termal of X mode, not text mode. But when I type reg command in vim, I haven't seen the system clipboard, And I can't copy the content of vim to other applications, such as firefox. My version is as follows : Fedora release 12 (Constantine) I have installed vim rpms as follows:
Quote:
rpm -qa |grep vim
vim-enhanced-7.2.315-1.fc12.i686
vim-minimal-7.2.315-1.fc12.i686
vim-common-7.2.315-1.fc12.i686
vim-X11-7.2.315-1.fc12.i686
I have a fully patched newly installed F15 x86_64 installation, with gnome-rdp used to run rdesktop to various Windows servers I manage. (rdesktop-1.6.0-11.fc15.x86_64) On F14, and most other Fedora's if I copied something on the Linux clipboard, I could paste it to the Windows server I was remote desktopped onto, and vice versa. However, on this installation this has ceased. The clipboard is no longer shared.
On a whim, I tested and found that when run from the command line as rdesktop -g 1024x768 hostname that the clipboard works. Thus the fault is with GNOME-RDP. gnome-rdp-0.2.3-8.fc15.x86_64
Seems a utility called "xclip" and "xsel" are required, but is there anything simpler, that doesn't require extra utilities, along the lines ofCode:cat foo.txt > clipboardThis would for GNOME.
View 9 Replies View RelatedI want to copy a highlighted field to the clipboard (not the copy/paste within vim but the clipboard that can be pasted outside of vim). I can do this by using the mouse but using the visual command (v) and then the yank command (y) does not do that.Is there a way to do this without the mouse?
View 10 Replies View RelatedI having a hard time figuring out why this code works in an interactive ipython shell, but it gives a blank clipboard when run in a bash terminal.
Code:
#! /usr/bin/python2.6
#
[code]...
In windows using remote desktop connection you can press Ctrl+Alt+minus to copy the current window on the remote desktop to the clipboard. How do you do that in Ubuntu's terminal server client? I have not found any key combination that works
View 2 Replies View RelatedMy xfce4-screenshooter GUI has the option Copy to the Clipboard, but I could not find this option in its' cI'm trying to bind printscreen key with this. I know that in order for the option to work I need to have the application always running (in GUI thre is option Close the application after screenshot , again somenthing that I can not find in command line).
View 9 Replies View RelatedAlmost every time when I'm typing, I come across this weird thing where something random happens. It can range from the object in the clipboard suddenly pastes itself, a random thing from the page I'm on, or from another tab places itself in the textbox like I pasted it and can even go as far as to close tabs, or windows. I'm using Ubuntu 10.04 on an eee pc 1001p.
View 1 Replies View RelatedWhat is everyone's favorite screenshot programs? I really don't like the gnome one. A timer feature is very important to me and the gnome one doesn't have it.
I found the Xfce4 Screenshooter and it has a timer. Are there any other good ones that other people like? If there was a way to copy the picture to your clipboard that would make me even happier. I almost always edit my screenshots after I take them so that would be even more helpful. [url] [url]
I would like to know what clipboard managers are out there that are able to run independently of any system tray, or what have you, such as gnome panel. Ideally ones providing full keyboard navigation, that is for calling up the program and selecting from it.
I have tried anamnesis, which can operate as a stand alone program and does appear to offer some keyboard navigation, and whilst it wasnt as attractive or discreet as programs like glipper, parcellite, clipman, etc, i was willing to go with it. However, keyboard navigation is really problematic (maybe to do with how i have set it up, though i doubt it as its installation is so basic), so i have had to abandon it for now.
Am i using it wrong? Anyone else managed to select from it with the keyboard? I think iv googled this to death, but perhaps someone knows of something all the same.
I ask as i am using Openbox and am considering ditching gnome panel, as it is slow loading at boot and wont fully hide (one pixel!). Aside from that a panel icon is unnecessary in my case, as i am more keyboard focused, and it also wastes space that could be better used for the graphical windows list, especially when your rocking a single panel.
I'm running a Windows 7 guest using Virtual Machine Manager to launch my "console" to the VM. I believe it uses VNC to connect to the console. I'd like to have clipboard synchronization so I can copy from the host and paste to the guest.
View 1 Replies View RelatedI highlight text in an email, "cut". Right click KGPG, encrypt clipboard, select my own public key, go back to email and "paste" and it appears in plaintext! WTF I tested it in kwrite too. Wrote the text "hello world", highlight, cut, encrypt clipboard, select my public key, paste, "hello world" appears! WTFx2
View 17 Replies View RelatedI would like to set Y and P to copy and paste directly to the system clipboard instead of vim buffer. I don't want any additional commands. Just the normal ones, but they should copy to and paste from the system clipboard and bypass the vim buffer.
View 5 Replies View RelatedIf I copy text into the xterm clipboard from vim, it is cleared when I exit vim. How do I prevent this?
View 1 Replies View Relatedcopy a jpeg or a png and place it into the clipboard of X11 of my icewm. which program can do cat "myfile.jpg" > ?theclipboardofx11?
View 10 Replies View Related