I have the same problem where i cant switch to my 1920x1200 anymore it says 1600x1200 is the highest which sucks because i have no idea why or how it switched back to 1600x1200 when i had 1920x1200.
View 1 RepliesI just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies View RelatedI have a 30" apple cinema display. The monitor handles up to 2560 x 1600 pixels which is the optimum resolution for this monitor. I found out that most apple monitors have nvidia graphic card.The monitor is hooked up to a motherboard Intel BOXDG45FC. This motherboard has Onboard Video Chipset Intel GMA 4500. However, using KDE interface I dont get beyond 1280x800 resolution for the monitor.How can I get the maximum resolution for the monitor?
View 9 Replies View RelatedMY current screen resolution is 1200X800 but from my monitor manual I can see that it support these resolution also 1366X768, 1280X960, 1280X1024 but there is no such option to change in my fedora 12. How can I change that?
View 14 Replies View RelatedNew to ubuntu, as of about 3 days ago. Using ubuntu 9.10 on a Dell Dimension 3100. I installed ubuntu as a program on windows 7. I am only given the option for 800X600 and wanting to switch to 1024X768. My graph card is MESA DRI Intel 915G GEM 20090712 2009Q2 RC3/x86/MMX/SSE2 v1.4 Mesa 7.6. Other info: The X.ORG Foundation v1.6.4. How can I get the desired screen resolution?
View 1 Replies View RelatedUbuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
I am using Intel builtin VGA card. I got a problem with resolution which is max here 800*600. I want to set it to 1024*768. I already did that using xandr but the problem is every time I restart I get to my default settings feeling like ubuntu discharge all my changes all fields even if i followed the steps of saving.
View 5 Replies View RelatedI have a brand new computer with an ATI Radeon HD5850 video card I have a LCD monitor with a native resolution of 1920x1080. I installed Debian Testing 2.6.32-5-amd64
Because I have several machine, I use a KVM (switch keyboard) in the middle. This KVM is quite old but still work correctly only problem is that it don't forward the EDID information. Until now it wasn't a problem, and by specifying the correct parameters of the monitor in /etc/X11/xorg.conf , I always succeed to reach the 1920x1080 resolution
In installed the proprietary drivers from ATI Catalyst 10.6 (last version)
since I have 2 problems :
first in the console I used framebuffer in 1280x1024x32. Before installation of the ATI drivers, it was ok, now the screen is completely black !! on every tty (I didn't investigate much on this trouble yet)
Second problem:
I can't reach the native resolution of my monitor ! No matter what I'm doing, the best the driver propose is 1600x1200 !!
I made a lot of test and modification in xorg.conf but without success, it always goes back to this resolution and never propose something higher For information, if I connect the monitor directly to the video card (removing the KVM), everything is OK and the resolution is automatically set to 1920x1080
/etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code].....
Just got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
View 7 Replies View RelatedI recently installed 11.2 and am now trying to increase the maximum screen resolution.When I go to 'confifure desktop' > 'display' it will not let me increase the maxiumum screen resolution past 800X600.My nVidia 6150 LE drivers/kernal are installed, so I'm not sure quite what to do.
View 7 Replies View RelatedThe login screen is always at maximum screen resolution, how can i change this?
View 2 Replies View RelatedI just installed openSuse11.3 on my desktop, but when I switch on my pc, windows starts aumatically. I can run openSuse only if I insert installation cd, select BOOT FORM HARD DISK and then Grub appears...I have a problem also with screen resolution, I installed nVidia drivers, but the maximum resolution is 1024X768...
View 3 Replies View RelatedI am trying to find the maximum supported resolution of my video card by using xrandr. My card is an NVidia GeForce Go 7300 (in a laptop). The official documentation does not list specific resolutions that are supported. My laptop display is detected as "AUO" in the NVidia X Server Settings dialog (Ubuntu 10.04 amd64) and has a native resolution of 1280x800. However, I would like to know what is the maximum resolution that I could use on a display with the VGA adapter irrespective of whether the laptop's display is on. This is what I get from xrandr: Screen 0: minimum 512 x 384, current 1280 x 800, maximum 2304 x 864 default connected 1280x800+0+0 0mm x 0mm
1280x800 50.0* 51.0 56.0 52.0
1024x768 52.0 50.0
[code]....
I am guessing the maximum width of 2304 would be for using TwinView with the laptop's 1280-width display next to a 1024 CRT or similar. Surely these cannot be the only supported resolutions. I would like to use a LCD display of width somewhere around 1600 pixels (in particular while turning off the laptop's screen so as to use the external LCD as the primary display) if possible.
I ordered a DELL studio 1536 with AMD turion rm-74 and vista preinstalled. Although it is still in production, I plan to install ubuntu on it and install an xp/vista guest in virtualbox. However, I am wondering if I can do it. There are many questions, partial answers are welcome:
1- Can ubuntu (32 bit or 64 bit) recognize the 1920x1200 screen, webcam, HDMI etc etc? any tricks if it can?
2- Is it possible that I ghost the vista so that I can restore it later in the virtualbox? and can I upgrade it to win7 from vbox? DELL says it is eligible for free upgrade, a very weird option nowadays.
3- To what extend will the guest OS control the machine? For example, is it possible to output a website video (e.g. live TV in bloomberg.com which is only available in windows) from the guest to the HDMI?
I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work.
The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything.
I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is:
ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync
This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is
Section "Monitor"
Identifier "Monitor0"
ModelName "SyncMaster"
DisplaySize 518 324
[Code]....
I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem.
So I have been running uvesafb for a while now with no complaints, but klibc hasn't been updated for about a year. I contacted to the author and he said that he will have an update in the coming weeks. However today I was googeling around and to make a long story short, I have successfully been able to get a 1920x1200 console resolution with just the plain old vesafb. This is good news but I am also confused because I've been told many times that is not possible for vesafb to do higher/wide resolutions.
View 14 Replies View RelatedIs it possible to use SuSE 11.2 with a dual monitor setup, one monitor being 16:9 running 1920x1200 and the other being 4:3 running 1600x1200? I'd like to know before I start buying the equipment.
View 2 Replies View RelatedBeen trying to setup my xorg.conf file to have a 1920x1200 screen.Strange behavior: when my X starts up, I see my mouse cursor, can move it around. It's small enough to suggest the 1920x1200 resolution took, is working.However, the rest of the screen remains black. No login prompt.I've looked at /var/log/xorg.conf, no errors.Is there something else I can look at?
View 1 Replies View RelatedI opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I am running 11.1 with an nVidia GeForce FX 5200 graphics card and I have configured the monitor and graphics card via "sax2 -r -m 0=nvidia". My xorg shows all of the correct monitor settings and screen resolutions, yet when I go to the Display settings or nvidia-settings, it does not offer me any of the 16:10 aspect resolutions that are in the xorg.conf file.
Here is my xorg.conf:
# /.../
# SaX generated X11 config file
# Created on: 2010-02-22T00:43:08-0500.
[code]....
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies View RelatedI'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedI searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedWhen I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies View RelatedWhen connected to a Wireless network, how can I use the maximum bandwidth in the network as I am finding that my network speed is degrading day by day as more users are logging onto the network. Btw, I am using Natty Narhwal.
View 1 Replies View RelatedI was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies View RelatedI used to have Windows on my laptop, until I got the blue screen, so I just installed ubuntu. Well everything was ALOT louder on Windows, and I was wondering if there was a way to increase the maximum volume. I have to turn the volume almost all the way up to watch a movie. On Windows 1/4 volume was plenty. I searched, but alot of the answers I saw were that it was hardware limitations, which cant be the case, since it was a ton louder on Windows
View 5 Replies View RelatedHow can I maximum the CPU usage for a process? And also use both cores if possible.
View 5 Replies View RelatedHow many users is it possible to set on Ubuntu 10.10? I have an Edubuntu LTSP system for a school (10 clients) and I wish to setup an user for each student/teacher (about 200).
View 2 Replies View RelatedI have a dual boot with windows 7 and ubuntu 11.04, I have installed this a couple times, so its not the first time it happens. My laptop is an acer 5678zg i think its called. I previously had 32 bit ubuntu and 64 bit now, same issueWhen I boot up ubuntu, my volume is sat at maximum which is really annoying since I have the sound through hdmi pass through via onkyo receiver and loudspeakers. Even when I turn volume down, the volume meter is not at top, but at where it was last time, but the volume is still at top and decreases to whatever volume I had at last time at first click on volume down.
View 9 Replies View Related