I have upgraded my Ub-10.10 to 11.04 yesterday. Everything works well except new kernel.When i try to boot with 2.6.38 kernel, i can't get to the desktop. Only black screen.But when i try to boot with old kernel (2.6.35) from "Previous Linux" on GRUB, it works well without any problem.PC Specs >> AMD Athlon X2 5200+, ASUS M2A-VM, OCZ 2 GB DDR2 800 Mhz RAM and Palit Sonic GTS 450.
View 3 RepliesI have 3 script BASH. I want start this script when the system start,stop and reeboot.
View 4 Replies View RelatedI use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View RelatedI install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
i want to add a new system call.im following this guide [URL] in this step 6 he said add __NR_mycall to some number, in unistd.h. in include/asm/unistd.h there are are around 1079 calls for different hardwares. and the __NR_SYSCALLS is also defined many places. I don't know where to add my new system call. and another qn is. whether the number for syscall in unistd.h and arch/x86/syscall_32.s both should be same?or they can be different.
View 2 Replies View RelatedI did a yum update and after that, I can't start X. The error is something like
Code:
(EE) NOUVEAU(0): Error creating GPU channel: -19
(EE) NOUVEAU(0): Error initialising acceleration: Falling back to NoAccel
[code]....
Both in 32 and 64 bit I cannot boot kernel-rt. Message displayed: mounting none on /dev failed: no such device. Then get login message in text console, gdm cannot start.
View 1 Replies View RelatedAfter to trying make a Multiboot live USB using MultibootSystem, my Ubuntu (10.10 install in Windows 7) is not booting anymore. I have moved the folder c: ubuntu (to saved my data) uninstall Ubuntu and reinstall it still nothing. I have the grub but when I select Ubuntu I have the following error message:
error : out of disk
error : you need to load the kernel first
Press any key to continue...
When I press anykey () I no have the message
error : unknown filesystem
error : you need to load the kernel first
Press any key to continue...
I'm using 10.04 LTS and updated to the last kernel. After reboot the system is hanged to the grub>
I tried to reinstall grub with the 10.04 live CD but the same thing append after reboot!
The only thing I can think of is that the machine is a RAID 1 system! What can I do to restart it normally?
I have maked a new kernel (version is 2.6.24.7) in debian system which kernel is 2.6.26, and then when i start the new kernel which is 2.6.24.7, it tells me that:
View 1 Replies View RelatedWhen booting FC10 the last two kernel updates I get the normal boot text but it stops atmkrootdev: expecting fs optionsmount: missing mount pointI checked /etc/fstab and it looks like this
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
UUID=551ead5a-7b2a-4d24-9eed-15b078a36b67 /boot ext3 defaults 1 2
[code]...
I've recently upgraded to Natty (11.04).The problem that is now occurring, and reoccurring, is like this:- Computer boots, but hangs on a purple screen (nothing on it). Nothing happens, after 15 minutes or so I give up waiting and hard reset.- Boot via Grub (holding shift) into recovery-mode: works fine, but I want the GUI, so I reboot.- After reboot the system hangs again, as mentioned before.- Hard reset again, and booting a previous kernel (2.6.32.8 ): works fine!- Restart again, boots in most recent kernel (2.6.38.10): works fine now.- Try to shutdown/restart again, problem re-occurs every time. So I use the workaround with the extra startup with the older kernel again.and finally typing this.
View 1 Replies View Relatedinstalled Python 2.4 and then removed already present Python 2.6. After restart, when i selected the working kernel, that white ubuntu symbol splashed and screen went black with two small lines at the top.. it doesnt go beyond that. Please help me. I tried selecting other kernels. It did not work. I used "nomodeset" by editing the the kernel at the grub..
View 1 Replies View RelatedI just updated my kernel on Fedora 13. The bug update thing popped up, I clicked install, it asked me to restart, I did this, now the loading bar on boot gets to the end then stops and goes no further. A google search showed people using older versions of Fedora have had some issues similar because of their nVidia graphics card, which I also have, however I can't find a solution. There is no terminal to play with, no error message, so I have very little to go on. I have a java project for uni on there I need to rescue so any help would be very welcome.
Extra update, while starting up I pressed esacpe and was giving the option of an interactive start up which pretty much confirmed it was a problem with the nVidia card, told me that the driver wasn't installed with warning writern (is this a word?) next to it orange writing which didn't seem to positive. It seems that spamming escape earlier in the boot lets me play with grub. Using the old kernel to boot doesn't seem to help. So ready for those solutions now.....
Yesterday I installed Fedora 15 instead of Ubuntu 11.04. I have nvidia card, so I've searched for nvidia driver installing howto and found it on this forum [URL]. But after updating kernel -
Code:
yum update kernel*
(now it's latest - 2.6.39) - and rebooting Fedora didn't start. I even don't know if it's something with GRUB because It automatically loads Fedora and I can't know whether it's its problem. When I try to start Fedora, I just see black screen with blinking underline cursor at the top left of the screen and it's the first and the last I see except laptop splash screen. I have Asus F50SV (Nvidia GT120M). By the way, I've tried to install nvidia drivers manually and xorg.conf became broken. I've edited it and now it like this:
Code:
# RPM Fusion - nvidia-xorg.conf
#
Section "Device"
[code]....
I rebuilt my kernel with dynamic ticks, high resolution timer support, and hugepagetlb and hugepagetlbfs support. Now X does not load. If I start it as root, xclock shows up and then the screen goes black and I can't do anything. Normally xclock and three xterms show up. If I start it under my normal account, I get a black screen with nothing but a cursor, which moves and has the "busy" pointer. It is not configuration because I booted an old kernel and am using X under that right now.I also set CONFIG_PM_RUNTIME to no. My monitor uses DPMS so maybe that may have done it.
View 4 Replies View Relatedinstalled corectly the program, but when I start it, it starts to integrate to the kernel, I got error and this is the log.
Code:
May 12 16:04:07.612: app-139838623995648| Log for VMware Workstation pid=25181 version=7.0.0 build=build-203739 option=Release
[code]....
I have 2.6.18-164.2.1.e15 running on Hyper-v. I did yum update and noticed that kernel is upgraded to 2.6.18-164.9.1.e15. If I try to boot into the new kernel it hangs with message first "switchroot mount failed" and then "kernel panic". This is probably related to Hyper-v drivers installed in the old kernel. First question: Do you think this is correct? Is it possible to somehow disable Hyper-v drivers so I can boot into the new kernel and then reinstall drivers? There is nothing in Microsoft documentation about uninstalling Linux Integration Components.
View 9 Replies View RelatedI'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies View RelatedI have been having some problems with virtualbox starting. So here is the issue: When I start a VM I get the following: Code: Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
[code]...
I am seeing quite a few entries about the usb. I am not sure if that is common or if its unrelated. I am running x86 11.3, and virtualbox 4.0.4 I have tried to uninstall, and even go back to 3.2
I Just loaded 11.2 64 bit, initially the kernel was "default", however, after I installed my Nvidia drivers it changed to desktop, I'm not sure I understand? In GRUB my screen lists it as desktop. Is "default" somewhere? Was it replaced? Things seem to be working alright in most cases although I'm having inordinate problems with "virtual Box" and Vmware server. In Vbox the kernel module won't start.
View 7 Replies View RelatedIf I do try to start a PXE Installation, the PXE Bootsystem loads the kernel, and
I guess it trys to start to load the initrd, but then it froze, i need to reset the computer. On the TFTP Server (aftp) I see that it trys to resend the initrd files and runs into a time out.
Ive the problem on 2 maschines, both with the same Motherboard (ASUS M4N78).
And the PXEinstallation of OpenSuSE 11.3 works fine, without any problems.
I have Fed 12, running on kernel 2.6.31.5-127.fc12.i686 I have newer kernels installed, but they will not boot into X.
The updater installed the kernel 2.6.32.21-166.fc12.i686. I can boot into runlevel 3. But if I then give the command startx, I almost get an x-window, I can see the top and bottom, ermm, wadjecallems, beams, but the screen is blank, and then the machine freezes. I can only switch off.
while I was using a live cd, I accidentally deleted some files on the hard drive, including apparently the init file. The fact is that linux doesn't start anymore (kernel panic).
View 14 Replies View RelatedI've upgrade jaunty jackalope to karmic koala. First of all I've found that firefox doesn't work correctly: it was impossible to open any page. Than desktop became black without signs and I restarted system. But it was unsuccessfully, I saw this:
[Code]...
I just changed my old DDR Ram that I had (which I couldnt use in my PC) with a DDR2 1 GB 667 mhz. So that I could use in my pc. ( I currently have 512 mb 667 mhz.)
When I install the new Ram I see that pc detects it, it says 1536 mb for RAM. But the ubuntu wont start.
I try the new Ram alone, and it doesn't work either. In fact in one of the slots computer diesnt eveb show the first black page in which it gives some info about the pc. And when i use it in the other slots, it shows that page, it disappears and it comes again, as if it is restarting the pc.
My motherboard supports the Ram actually, (i have a GeForce6100PM-M2)
I have considered a Bios update but i am not really sure as it is a bit dangerous, and I am not an expert.
I upgraded my xubuntu to 10.10 yesterday. Then I changed my theme, and I've been logged-out Now, when the system started, I see the login screen. When i log-in, i see a black screen and the login screen again.
View 3 Replies View RelatedWell, to start off my graphics card didn't work but I got that fixed.
When I start up and the login screen appears it no longer says my username and Other.. under it. It only displays Other.. I have to click that type in my username and then my password. When I log on the Auto Bug Reporting tool pops up and says 3 things crashed
I can't change my system time, shutdown or reboot under system or my username in the top right hand corner. I have to su and manually type reboot or shutdown to shutdown. It is like the computer is completely restricting me from using it.
When I try to get into my firewall an error comes up
I cannot mount anything:
I have a linux system which has a NAND flash. The compressed kernel is flashed into the NAND flash. On boot up, the kernel is uncompressed, copied to RAM and runs from RAM. Is it possible for me to read the kernel information from NAND flash such as size, start and end location and version?
I have been looking for this in the net, but did not find any answers so far...
I have tried the following: The compressed kernel lies in the 4MB partition of the flash. So I tried: dd if=/dev/mtdblock1 of=zImage But this copies the complete 4MB partition. I need to copy only the zImage. So I need to know its size.