It will not get network connectivity at all recently. Can't ping, can't browse, no Samba, nothing.I've checked my IP, mask, gateway, broadcast, network, and DNS settings and they're correct. I've restarted networking, restarted the machine, nothing. I've replaced the network card with a different brand and interface, nothing.As I stated before, this is a NAS, so network connectivity is needed. It's running Ubuntu 9.10 64-bit desktop.
View 2 RepliesI am new to linux and am trying to write a script that will ping IP addresses and say either online or unavailable.
View 3 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
When i ping www.google.es, i get something like:Quote:
ping www.google.es
(wait 20 seconds)
64 bytes from 66.249.92.104: icmp_seq=2 ttl:53 time=80 ms
[code].....
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View RelatedEven ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
eg:
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I try to use the "ping -a" command for getting an audible ping. But there is just silence The command "beep" works fine, so everything should be ok with the speaker (in the konsole).
View 3 Replies View RelatedI try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
View 5 Replies View RelatedHost - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
I installed nss-mdns in Fedora Core 10 and can see all the Bonjour published hosts on the lan. However, I am always forced to append the .local domain when referring to a host:
Code:
% ping foo.local
works
[code]....
I need something like that
Code:
checkip 192.168.3.44 >> ip.txt
ip.txt: ON!
And with that i wish to see if my sister's computer is connected to the internet.
A ping based solution is ok but i need things like returning 0 for pc not connected to internet and 1 otherwise.
i had ubuntu 9.10 and updated to 10.04. i also removed WIN while in process of upgrading, anyhow, now pc will not allow me to get online. i did not unplug anything when i upgraded pc, not until after i realized i could no longer get online did i change the ethernet cable, and remove the router (both of which failed).
i have looked to see if i needed to install something extra to be able to get back online, but so far i haven't found a site stating that i need another package to get online.
my problem: i am using unbuntu 9.10 on a dell 1420 inspiron laptop. i wanted to uprage to the new version of linux "lynx" . while i was doing that a problem occurred while downloading the new packages. It said that what i have already downloaded would be saved but i had to restart the download--so far no real problem. When i restarted my computer, wicd wanted to access my internet card interface, or something like that, and asked for my password, i gave it, and then wicd said it couldnt connect to my internet card and i needed to check the wicd error log. everytime i restart my computer i go through the same process and always end up with NO INTERNET CONNECTION WHATSOEVER, not just wireless, wired connections dont work.
i hope that was clear. the reason i was upgrading to lynx was because wicd had problems in the first place, but now i cant get on the net in any way with my laptop--so how do i fix the problem? should i burn an iso of the new linux and then stick that on my machine to uprgade? or is there another way. The main goal of mine is to have a laptop with linux that can wirelessly access the internet.
If i didnt provide enough info, i'm sorry(i'm young, but computers are pretty baffling sometimes) or if you want me to do something i can post the results, but i dont know any codes and can't find the error log for wicd.
i used the Script to download/compile Flightgear 2.0 everything works fine, except i cant seem to get online works great on Windows and OSX im using FGRUN and the normal settings DONT WORK im pulling my hair out trying to get online
View 1 Replies View Relatedi am using VMware player, on it i have dedicated 40gb of my hdd and 1gb of my ram for Ubuntu 10.04. i installed eve-online using WINE 1.2 and followed some instructions from a thread of eve online forums [URL]
Quote: to avoid some random crashes launch eve with the command: wine explorer /desktop=EVE1,1920x1200"C:Program FilesCCPEVEeve.exe" this emulates a desktop in wine. replace 1920x1200 with the resolution of your monitor
i changed the res to 800x600 and attempted to load eve, the splash window loads up and then nothing, the splash window dissapears and i am left with the background of the WINE UI (in which case i cannot close the wine window either) i then attempted to find out my graphics card and i cannot find it using
$ lspci
$ lspci -v
$ lspci -v | less
[Code]....
i then tried to hardware drivers, in which case there are none shown from system>administration>hardware drivers. I then attempted to change my screen resolution or modify my display settings in which case i got Quote: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? Quote: You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
at this time i will say my graphics card is a geforce 8600GTS 256mb let me know if i am missing information which will help resolve the problem, but be warned, if u require the info, u are litterally going to need to spell out to me what info and how to get it, as i am not used to commands
My icon shows that the connection is good using wifi. However, I could not go online. What's wrong?
View 6 Replies View RelatedI just bought an almost new netbook with the Ubuntu 9.10 netbook remix on it. It's made by System76 and was designed to work with Ubuntu. I downloaded Xubuntu-desktop and wicd and it now has a lot of software on it. It connects to the internet easily with a wired connection, but I cannot get it to find an ip address on my unencrypted home wireless network...it does see my network, though.I don't see the name of the hardware when I type sudo lspci. How can I find what chipset I have for my wireless device? A how to get online wirelessly?
View 1 Replies View RelatedI'm having trouble getting online, and therefore getting software, codecs etc, (I'm using another computer for this post) because the only option I have to connect to the web is through 56k dial-up modem, and this is apparently akward with ubuntu. I'm currently trying to work out how to get Ubuntu to recognize my modem. I have over-written Vista, which was previously on my laptop, although I did make recovery discs (though I really don't want to have to use them).
This is making it difficult for me to even find the model of my modem (it would involve reinstalling Vista and checking for the device under device manager, or Vista equivalent).I was advised to download the "Official Ubuntu documentation", and that this had a 'how to' section regarding dial-up modems. I downloaded it and searched it and found nothing as such. I also have downloaded the Ubuntu pocket guide and found nothing on the topic in it either.I can get online (via dial-up) on my XP machine, and also have USB storage sticks.
I am using Ubuntu 9.10, but I can't view the video from CNBC or Bloomberg. I wonder if I need to install Adobe Flash in order for it to work. If not, which software should I install?
View 6 Replies View RelatedI have a LAMP server setup with AjaXplorer that runs locally with a static IP address. All you have to do, if you're connected to our network, is go to code...
Now I want to take the next step and make it available on the internet, so that I can access my files from anywhere in the world.
How do I go about doing this, and what precautions do I need to take?
When I access [URL] and I can't see tv online like windows. I would like to install "GOALBIT" so that I can watch this channel online. I was reffered to this site [URL] to install goal bit. It says that its a free software and you can use it with GNU/LINUX. If someone knows how to install this software I'm using ubuntu the latest desktop version on my laptop.
View 2 Replies View RelatedA couple of weeks ago I connected my desktop to the internet and upgraded Ubuntu. I haven't used it since then, until today, when I took the ethernet cord out of my laptop and stuck in in the desktop. The light next to the place you plug the cord in came on and Ubuntu tried to connect, but eventually it just said "You are now disconnected." I restarted and it continued to do this. I plugged the ethernet cord into the laptop and now I am online. What is going on here??
View 4 Replies View Relatedwhat do people use to catch and assimilate their podcasts? I found a thread from a few years ago but am looking to see if that's still up to date.I don't have an iPod so it would be just to listen to on my laptop and to put files on my Motorola Droid. I don't even mind manually putting the files on the phone. I just want something easy to install and use.I tried getting gpodder and couldn't figure out how to get it installed
Edit-I finally got upgraded to 9.10
Last but not least, I was wondering if there were any workarounds for watching Netflix videos or shows on sites like ABC/NBC/Fox etc. I'm really trying to stick with Ubuntu but this is one of the really annoying things along with the growing list of applications i can't run I'm trying to get used to Ubuntu as a way to get out of buying a copy of Windows so I'm not really interested in solutions that involve dual booting because if I'm going to have to buy a copy of 7, I'm just going to format the laptop.