I installed BOINC version 6.10.17 through Synaptic Package Manager with no problems.
When I launch BOINC it opens fine and immediately asked to "Add Project".
I click next to select a project and everything closes, with no errors.
I have tried opening from the CLI with sudo, no success. I have uninstalled reinstalled with no success and even tried restarting the computer with nothing.
I didn't do enough research beforehand and just discovered that while gcc 4.1 is still packaged, g++ 4.1 is not. I am working on a project with unsupported libraries (don't ask) and can only build successfully with g++ 4.1.*I see that there are packages for Lenny. Is it safe to install these under Squeeze?Being new here I am not sure where else to look for third party packages is, so if anyone could point me in the right direction that would be great. I'd very much prefer not to try to build from source as I'll almost certainly clobber my 4.4 install in the process.
View 3 Replies View RelatedI am trying to set up my cpu freq. scaling to ignore BOINC. From what google has shown me this is done by setting a value of 1 for ignore_nice_load. However the location of said value does not seem to be the same in 10.04 as in the results from google. How do i set this or is there a better way to keep idle processes like BOINC from increasing the my cpu frequency?
View 4 Replies View RelatedI have Fedora 15 AMD64 installed on a AMD Athlon II X2 250 3.0Ghz, 8GB DDR3 1333Mhz, with a ATI Radeon HD5450 Graphics card recently installed. Problem is that BOINC won't recognize the GPU. I know the GPU is working because I've downloaded some MKV files from VODO, and I can play them while running BOINC at a fairly high level and they play fine (using Videolan as the player). Before I installed the GPU playback on the same files was impossible to watch, it was extremely jerky.
So now I need to get BOINC to use the AMD GPU, so I can upgrade my computation speed. And I need to get it set so that if I decide to do something that needs the GPU, that it releases it. I'm considering installing Neverwinter Nights on this computer. I never did finish the game before I dumped Windows
I've been using BOINC Manager to run Einstein@Home for about a week now on Ubuntu 10.04
Before I started using it I installed the Cuda 3.0 toolkit driver downloaded off of nVidia's website. BOINC ran flawlessly until today. I don't know what changed, but now the status of my tasks is
"GPU Missing, Ready to Run(1.00 CPUs + 1.00 NVIDIA GPUs)
My card is a Geforce 9800m GTS
I've installed the Boinc 6.4.5 x86_64 using F10 update package from Fedora repo. The client runs fine using the CPUs, but doesn't fing the nVidia display processors. I've installed nVidia drivers using Fusion repo packages for F10 ( currently 180.25 ) nVidia display settings seems happy and correctly reports driver 180.25 in place as well as 9600 GSO graphics card and LCD monitor.
My objective is to get Boinc using the CUDA capabilities of my GeForce 9600 GSO graphics card and see some of the performance benefits advertised. Although Boinc client is running it will only use the CPU to do work. I have not been able to discover any flags or configuration settings to help Boinc find CUDA library files. I'm stuck at the limits of my knowledge. The following are the startup messages from Boinc. I'm assuming the fact that it can't find the library causes the inability to see the GPU coprocessor.
[Code]...
I am running Testing with the liquorix kernel. Right now I have Boinc 6.10.52 on here. I have tried 6.10.58, 6.12.8 and 6.12.18 (all for 64bit linux). I have, for months, been running the 6.12.8 version. Boinc is installed in my home folder as it has been for nearly 2 years.
Rebooted after trying to test an Ubuntu LiveCD for the 11.04B1 (Failed big time). I turned off this drive in bios for that test. This has been done many times over the years of testing as I use a different drive for that and want no contamination of my main drive. I did have some problems booting that were corrected by reinstalling my fglrx-driver package.
The only problem is that Boinc will not run at all. None of those versions. They all behave the same way. Open boincmngr from menu and it comes up blank and "disconnected".Go to Advanced/Select computer. Has the option for "Debian". This is correct. Select that and enter the password for Boinc or the password for Debian and it tries to connect but does not.
I've just recently started using Fedora again and have a question about BOINC.I see that Fedora 13 is using 6.10.45, but the latest recommended release is 6.10.56.What is the timing on updated RPMs for new BOINC versions? Or is there a guide to updating manually, which I've been unable to locate?
View 4 Replies View RelatedI've installed BOINC for first time (from suse repos). I'm worried about running BOINC as root. How can this be avoided? I'd first like to exhaust all options with the official opensuse repo version of BOINC. If I am unsuccessful, then I'll try the version from Berkeley website.
View 13 Replies View RelatedI am trying to switch from Ubuntu to SUSE 11.4 but installing Boinc for World Community Grid
View 6 Replies View RelatedFirst problem:
apt-get --purge remove ubuntu-desktop
Reading package lists...
Building dependency tree...
Reading state information...
Package ubuntu-desktop is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I have installed Ubuntu desktop on Ubuntu Server to get Boinc manager running. Now I want to remove Ubuntu-desktop.
Second Problem: /etc/init.d/xorg start : No such file or directory When the server boots i get a blinking cursor.
Yesterday I spent a good couple of hours putting together a video. When I shut down, Lives flushed my entire project because it uses a tmp working directory and places it as default in tmp.Today, I changed the working directory to Video, thinking this would be safe. Instead, the programme quit half-way through editing and I have now lost another good couple of hours.is there any way of saving my project?I can still see the .lay file but there doesn't seem to be any way of opening it.
View 7 Replies View RelatedI want to resume a fantastic old laptop from 1993, the "IBM THINKPAD X86 Model" with 130,544KB of RAM. I love to think a new life for that unused hardware. I have a working usb port (not functional as BOOT) and a working cdrom/dvd device ( not functional as BOOT too) but the NIC is dead and don't have the Floppydisc device. I have a windows2000 professional on it, with a working connection ADSL via modem USB.
- At first for resolve the BOOT problem i download wubi.exe: wubi dont find the internet connection (probably because it's via USB), and it cant download the ISO - I try the WUBI installation on offline mode, with the relative ISO ( the "Ubuntu 10.04.2 LTS (Lucid Lynx)" ):
the installation work but it's stop at the "verify of the system" and the system doesn't work, probably because that Distro of Ubuntu it's a Desktop version, and that need 256MB of RAM and the Thinkpad have less memory. I need to install xubuntu on this machine but on the wubi offline installation don not exist that ISO. I don't want to surrender, this machine MUST have a new life!
P.S: when i'll install the system, i want to open the laptop and restore and redesign the plastic and much more! and i'll want to insert all the project here...
I am trying to get a git repo up and running for a project. I currently am running git-daemon through xinetd, and can pull from the repo but not push back to it.
/etc/xinetd.d/git-daemon currently looks like this:
Code:
service git {
socket_type = stream
wait = no
user = gitman
group = gitman
server = /usr/bin/git-daemon
server_args = --inetd --reuseaddr --base-path=/home/gitman/root --export-all
--enable=receive-pack --verbose --syslog /home/gitman/root
log_on_failure += USERID }
And /var/log/messages looks like this:
Code:
Jun 15 15:25:14 dev1 xinetd[27922]: xinetd Version 2.3.14 started with libwrap
loadavg labeled-networking options compiled in.
Jun 15 15:25:14 dev1 xinetd[27922]: Started working: 1 available service
Jun 15 15:25:43 dev1 xinetd[27922]: START: git pid=27927 from=209.XXX.XXX.106
Jun 15 15:25:43 dev1 git-daemon[27927]: Extended attributes (22 bytes) exist
<host=dev1.aea.us.com>
Jun 15 15:25:43 dev1 git-daemon[27927]: Request receive-pack for '/EPA.git'
For some reason, the push request goes through, then stops and hangs. I went to lunch for an hour, and still nothing.
I have nearly completed a project.My team developed using C,shell scripts and qt.I would like to know how to package it as a .deb file??Also during installation,i want it to check for the existence of few packages in the system.If they are not there,i want it to download them using apt.
View 3 Replies View RelatedI have a small java project that handle connections. In order to run it from the terminal I have to cd into the folder that contains the source and run the following command:
java -cp classes com.packagename.mainclass
Where classes is the folder that contains the classes. I want ubuntu to run this application on startup, is there a Java command I can use? Or am I just better off creating a shell script?
I just started taking AP Computer Science A at my high school and we are learning to program in Java. At school we use Windows XP laptops with Jcreator but at home I just have my desktop with Ubuntu 10.04. I installed NetBeans 6.8 with no issues but can't figure out how to import and be able to work on my Jcreator projects from school. Not sure if this is the right section but I really need to get something working for school.
View 2 Replies View RelatedI just finished my first bash script for moving around mp3s based on their ID3 tags. So I'm fairly new to this kind of stuff!Now I need a small program for Stop Motion. I need it to be light, To preview the camera frame, and some number of previous shot frames, via "onion skining" and surprise surprise, to control my camera.The thing is that I'm thinking of writing it in Python2.6 because I believe that it will be much more efficient and fun.
My question is:
a) Is this project small enough for me to tackle (considering I'm a freelance and currently theres no job to be found)
b) Would you propose an alternative language and why?
c) What about a nice link for learning a bit of Python!
Does anyone have a recommendation for project management software? We don't need anything too fancy - just boiler plate tasks, time lines, Gantt and Pert charts, etc. We would like to put the area on the web with Apache using SSL/TLS and password authentication or client authentication (and an alternate port).
View 6 Replies View RelatedI would like to secure my site and I want to implement CAS for SSO, SELinux for the permission into my server and CODA, the last one I have read is not compatible with it, but I don't know if somebody have tried something. The most important request from HQ is use SELinux, they're conviced is the best one for the user permissions. I tried to look for some info in internet but there almost nothing.
View 2 Replies View RelatedI want to deploy xubuntu on several computers for a long term use. I (not surprisingly) didn't like unity, and want to use a lightweight desktop with more or less classical design. Unity, Gnome 3 and KDE are not a solution, so the best thing that works for me is xfce on top of xubuntu. But... I heard some rumors on the net that this project is dying. So I want to know what is the status of this project?
Is it a live and kicking project with a growing community, or a remnant of the past with a small group of amateurs that keep it alive as a hobby. I need to rely on a solid project with a strong support that can't fade away in seconds. Same question about the 'ubuntu' part of 'xubuntu'. I'm sure there are people around here that follow those projects closely and can describe the situation.
I am making a project learning about inheritance and polymorphism
it consists of
Account.h
Account.cpp
[code]....
I have added a couple of clips (1080p50 XVid) to a project, and each of them play fine in the Clip Monitor. I want to add these clips to the timeline and add the Dissolve transition between them.
I have achieved the above and when I click on the Play button on the Project Monitor, I can see the project playing including the transition. All fine so far.
After this first play of my new project, I have tried to move the playback position bar and once I do so, the project monitor goes black. From this point on, I cannot see my project playing whether I start playback from the beginning or from an arbitrary mid-point. I may see a flicker of an image, and the transition effect may appear but that is it until I quit Kdenlive and start again.
I'm stumped as to what could cause this. I did wonder if it was because I was using onboard graphics, but I have upgraded that element of the computer today with no change in the result.
Computer specifications are as follows:
* Ubuntu 10.04LTS Lucid Lynx
* Intel E3200 Dual Core Celeron 2.4GHz
* 1GB DDR2 800MHz RAM
* MSI NVidia 8400GS 512MB Graphics Card
I know the machine doesn't have the highest specification in the world, and perhaps more RAM is needed for this job. I don't believe this to be the causing factor in this problem though considering playback is initially achieved.
Following a search of the internet, I've attempted two possible ways of resolving this: disabling Compiz, starting Kdenlive from the terminal using 'env XLIB_SKIP_ARGB_VISUALS=1 kdenlive' and running the Config Wizard. Neither has given the resolution.
I have a folder in my Home folder and called "Projects". I want to change the icon of the folder Project so the icon changed in everywhere. In "Places", Open Dialogs, Save Dialogs and Normal View in Nautilus.
What I have done:
Change the icon using Right-Click -> Properties -> Basic Tab -> Clicked the current icon and changed it.
But this changed it only in Nautilus. If I added this folder to "Places" it will appear with the Default icon. The same thing if I browsed to it using Open Dialogs or Save Dialogs.
I was trying to install java on 10.04 in firefox. Now whenever I try to get new software, there is none to be found. I am getting the error message "E: Malformed line 54 in source list /etc/apt/sources.list (dist parse) E: the list source cannot be read". To top it all off, I still cannot get java to function. I am pretty new to this.
View 7 Replies View RelatedI'm trying to make a program for Windows Me and linux that will mimic/imitate Windows Security Center. Maybe put it in the cloud? WIndows Me is good, it doesn't matter that Windows Me is discontinued, and I'm not trolling. But my main focus is linux.
View 9 Replies View RelatedI tried to update my eclipse to the Helios version through a PPA, but I wanted to use it for programming in C / C++, in order to integrate it with the NS-3. After updating CDT installed the plugin but could not create project in C / C + + because they did not appear in the File -> New -> Project. I decided to return to the previous version to see the eclipse in the repositories by default.I did:
Code:
sudo apt-get purge eclipse*
sudo apt-get autoclean
[code]....
I needed to create a virtual host for a php project I'm working on. Rather than using command line and text editors, I installed webmin to accomplish this and hopefully perform other server configuration in the future. When I created the virtual host and tried applying the changes Apache wouldn't re-start, and still doesn't restart after complete re-boot. It's getting hung up at the end of apache2.conf, which is trying to include /etc/apache2/sites-enabled/000-default.
When I look at 000-default from a File Browser, it's a linked file to etc/apache2/sites-available/default I can open both the linked file and actual file in a text editor, and it looks fine. When I view the directory, /etc/apache2/sites-available from shell, the default file isn't visible. It seems this "invisibility" is probably related to the error, which is preventing start-up. Can anyone explain why the file would be visible from the Ubuntu File Browser GUI but not from the terminal, and how I can fix so apache can recognize this on start-up?
I'm trying to install pawn for linux (downloaded from here: [URL] how to install pawn-3.3.4127.project file ?
View 3 Replies View RelatedOur application is based on the C++ devlopment which requires so many of packages dependent on the Ubuntu OS, Graphics libraries, Development packages and other dependent libraries. So we need to configure all those every time in a new PC when we add. Is there any other way to do this job very easily and the any method to create our application executable to run in all PCs with the dependencies packages installed.
View 1 Replies View Related