Ubuntu :: Banshee 2.0 Autostarts When Plugging In A Device?
May 12, 2011
Have tried to find an answer over at over LoCo (Sweden) with no result...Does anyone know how to stop Banshee from autostarts when I plug in a USB-drive, my iPhone or what-so-ever! Banshee even autostarts when I'm doing a "Connect to server" O_oHave even googled for it, with no result and it's bugging me off real hard that Banshee autostarts!Edit: If I remove Banshee, and still plugs a device in it now autostarts in qmm
Changing the brightness and keyboard brightness does not give a notification, though the brightness changes. In addition, ejecting a cd, plugging in a usb device, and seeking/playing music gives no notification (though Rhythmbox tells me what track I've skipped to/played). Again, the cd does eject, the usb device can be accessed, etc. I'm not sure if this last one is a problem, but every notification except for the volume one appears about 80 pixels down from the top panel. This 80 pixels below the panel is only ever occupied by the volume notification. Ubuntu 10.04, gnome-power-manager 2.30.0 ubuntu1, notify-osd 0.9.29-0ubuntu2. I'm using a Dell Studio 1555 notebook.
One of my servers contains two scsi enclosures. After hot removing a disk and hot adding another the new disk gets assigned a device file but the enclosure (in sysfs) doesn't want to see it.
How can I force the enclosure to recognise the hot added disk.
Situation in sysfs:
The link device is dead after hot removing the device and keeps vanished after hot adding the new device. The hot added device gets assigned a device file and it is reachable. Even
I have tried connecting an LG GD330 mobile in both "Mass Storage" & "Data Service" but in either cases it does not appear in bansheee nor even in rhythmbox.
I just got a Motorola Atrix yesterday. Figured I could just use Banshee to manage the device in Ubuntu like I did with my prior IPhone.However, banshee doesn't seem to pick up the device. However, they dont' tell you what file to add it to. I did add those lines to /home/michael/.config/banshee-1/addin-db-001/config.xml which was the only xml file I could find for banshee. However, still doesn't work.
Does anyone have any experience getting the Atrix to work in banshee. Or does anyone know of another manager I would be able to use to manage music and video on Ubuntu. The only official way to do this is to use Windows Media Player or the motorola app both of which are Windows/Mac.
I recently installed ubuntu and noticed somewhere that it says "Now you can say ubuntu has iDevice support out of the box". Naturally i tried, resulting in a music library with all the album artwork mixed up. I've tried to sync a couple of times, even added the repository for libimobiledevice and searched for the newest version (said it was already installed). When trying to sync with banshee (or rythmbox), it says syncing on my screen and on my iphone's screen. After syncing, my iphone updates the library, no new music is discovered. I can also add that banshee discovers 100 extra songs on my iphone.
I once plugged in my mini video camera (6, good buy), and I accidentally clicked on 'Always use F-spot to open this kind of device'. The problem is, I can't set it back to nautilus. I've looked everywhere, including right clicking on the drive in 'Computer', but the default application in the 'properties' window is set to 'open folder'. When I right-click on the drive, I still see F-spot on the list. If I select 'Open with other application', I can't change it from F-spot.
I just installed Ubuntu 10.10 32 bit on my desktop and I've encountered a curious and somewhat frustrating issue. It appears that when I plug a flash drive, external hard drive or MP3 player into a USB port my computer turns off. Sometimes it happens instantly, other times it occurs a minute or two later when I'm transferring files. I'm not sure how to approach this issue. I've searched the forum and haven't found any mention of this. I am working on said desktop and all other hardware seems in good working order. If it helps, This is a 3 year old desktop with an AMD Athlon 64 X2 4600 cpu, a ABIT NF-M2S AM2 NVIDIA GeForce 6100 motherboard, an EVGA GeForce 7600GT video card and a SATA harddrive. I can post a log if someone wants, not sure which one to post though.
I've got the Philips GoGear HDD1429 MP3 Player (4Gig), and it keeps annoying me. I can not sync it with Songbird, so I used Rhythmbox and it worked fine. Now I can't even access the player and plugging it in gives me this error message: The folder contents could not be displayed. Sorry, could not display all the contents of "Philips HDD14XX GoGear": DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I have a Dell Vostro 1014 laptop and I just installed Ubuntu 10.04. The problem I'm facing is that the sound output goes to both the built-in speakers and headphone jack.
$lspci -v 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Dell Device 0401 Flags: bus master, fast devsel, latency 0, IRQ 21 Memory at f6afc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel
$aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 0/1 Subdevice #0: subdevice #0 head -n 1 /proc/asound/card0/codec* Codec: Conexant ID 5067
I've searched through /Documentation/sound/alsa/HD-Audio-Models.txt. But I can only see Conexant models upto 5066.
I recently installed Ubuntu 10.10 on my Sony Vaio VPCEE2E1E. I've been able to avoid any major problems, however, my onboard sound doesn't work. I've tried plugging speakers into the laptop and this works perfectly. I'm rather confused as to why the onboard sound isn't working though.
Here's the output for lspci on my machine:
Code: **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC259 Analog [ALC259 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
buntu user but this time I'm planning to remain so I would like to solve this little problem, which is the following:I have a MSI Wind U100 running Ubuntu 10.04 LTS... everything works fine, both Compiz and Emerald, but when I plug in an external screen (Samsung SyncMaster 2232BW) Compiz simply gets disabled, if I try to re-enable it a pop-up shows up saying "Searching for video driver..." (or something similar) and it reverts "None" againWhen I unplug the external screen and try to re-enable Compiz it runs fine like it should, I've read elsewhere to run "compiz --replace" but it does nothingI thought something like:Plugging in an external screen requires Ubuntu to use a different display driver which doesn't support Compiz
I'd like to know if it's possible to automatically mount, and fire up rsync to sync a USB drive with a directory? Specifically, I'd like to copy as much data as the drive can hold and only delete the oldest files if space is needed. I would assume I'd do something like this with a script, but my problem, is where to start.
I am setting up another computer with Debian 6 stable and I have only 2 normal sata slot on the motherboard, the board has also 2 other Raid sata slot, I don't want to use Raid, can I just plug my 3rd drive into one of those. I read that I can use those slot as JBOD (just another bunch of drive). By running a Mandriva live cd before I install any OS, I don't see that 3rd drive. I don't see anything about JBOD in the bios.
If I plugin a USB drive (external hard drivee) into my running Fedora 13 64-bit system - it occassionally freezes up. This behavior is intermittentI could not trace it to any /var/log/messages yet.
My display on fedora 13 freezes, key board stops working, when I connect projector to my laptop. I see the display settings mentions "DVI monitor, resolution 1280X800 refresh rate 60.0". Do I need to set the resolution to some other number before plugging the projector on and do I need to change it back to the default resolution after unplugging projector
I searched the forums for a long time and could not found any relevant informationI am new to ubuntu (10.10 64bit) and I just want to know if it is possible, like it is in win7 (sorry!), if I can plug in my hdmi cord and have the laptop speakers and display disable, and have the external display and its spears enabled.
I had an old Windows disk I wanted to see if I could get some files off of. I was a Windows XP installation, but it got a virus of some sort and eventually died completely. I had always wanted to try to get my files off of it so I could wipe it and use it as another drive. Well, I plugged it up in my computer and thought that it would just recognize it as a regular data disk, but instead somehow it got automatically set as the boot drive. The computer went from the BIOS splash screen to blank and back a couple times before booting Windows. I then tried resetting the other drive as the boot drive and also unplugging the Windows disk with the same result: an MBR error screen.
I fixed the issue by reinstalling the MBR with the repair tools in the openSUSE disk but I am really curious if anyone knows why this happened. Is it a Windows issue or a motherboard issue or perhaps something else?. My old computer was about 7 years old but this new one is well, brand new. So I haven't had much experience with newer motherboards but I know they have come out with a lot of new features so for all I know they may have something that can detect a Windows install and rewrite the MBR or something. I also wouldn't put it past MS to influence($) MB makers to include such a feature.
The one problem I have now is that the boot options no longer display the kernel version, and the splash screen with the progress bar no longer shows, just the standard text.
Where the script is for Gnome 3. When I plug the HDMI cable, the desktop expands to include both, but disables the backlight on the laptop monitor. I have to restart gdm3 or the laptop for the brightness control to bring it back up. First, why would it turn brightness to 0, and how do I change the default of that so it stops. I plug and unplug the HDMI regualarly while I wait for a new desktop and the laptop has to pull double duty.
I just switched from Ubuntu 14.10. It never blacked out a screen on plug in or removing. That means that there must be some way to do it, however, it used Unity and this is Gnome 3.
I installed KDE. It works as well. I will use it for now, but would like to get Gnome 3 to work. My default is gdm but I think I saw I can switch it to kdm.
Is it possible to automatically run a program on a USB Flash drive upon plugging it on a computer?the program should create a text file inside the USB flash drive as i plug it on the computer? Is this possible? how can i do this? autorun.inf doesn't work. Are there any solutions? by the way, i am using kernel 1.0 on my computer...
Code: load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.
Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.
How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?
After much research, I have found the solution to my intermittent wireless problem!Whenever the laptop is plugged into power, wireless is perfect, when I'm on battery, wireless is horrible.Here is the fix:
Code: sudo iwconfig eth1 power off Unfortunately, I have to type this in everytime I unplug the laptop.
I rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):
Code:
richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd] mdadm: looking for devices for /dev/md0 mdadm: cannot open device /dev/sdb: Device or resource busy
