Ubuntu :: Automatically Add Panel To Second Monitor?
Jun 16, 2010
I want to add a new panel to my external monitor automatically, but I don't want it to clutter up my main monitor when the external is not plugged in.
As it stands today, I right-click on my top panel, select New Panel to create a new one, right-click on that one, select Properties, select Bottom, right-click again, select Add to Panel, select Window List and Show Desktop, right-click on both, select Move and drag them left....every single day.
At night, I go home and delete the new panel, because I only use a single monitor and the panel is there, cluttering up my desktop.
I'm using 11.04 with the old panels, no side panel. For some reason gnome-panel doesn't launch automatically so I have to do it via terminal, which means I have to keep the terminal tab open if I want to keep my panels.
Adding it to startup programs resulted in invisible panels (Cannot register the panel shell: there is already one running.), which I bypassed by typing gnome-panel --replace. I would like a permanent solution though..
I've run ubuntu 9.04, 10.04, and 10.10 on my Dell latitude e6400. On every version the mouse buttons stop working after a few clicks, on the trackpad and with a USB mouse. lock panel is checked if i right click. If i uncheck lock panel it will work for a little bit longer then stops. Anybody know how to fix this?This is my first time using ubuntu and i really want to love it. Had xp before on the Dell, but I don't like it. We're a Mac family, but if this works ubuntu could change our minds!
I have a laptop that I use in three environments with different monitor setups.
1) At work, I have a 1280x1024 second monitor. 2) At home, I have a 1920x1080 second monitor. 3) In meetings and other places I have no second monitor.
Whenever I switch between these setups, which is at least several times each day, I have to manually change the monitor configuration. I use the nvidia-settings tools.
Granted, it only takes a few seconds. Is there a way to make the system smart enough to automatically detect when a monitor is added or removed, know *which* monitor is attached, and reconfigure the resolution and monitor layouts the way I want them?
So I'm not really sure what it is exactly that I did but my internet just quit working. I can't connect to anything at all. I have an acer aspire 5532. It uses build in wireless but I just tried to connect using an ethernet cable and nothing happened. Still couldn't get on the internet. My wireless monitor won't even show up on the panel and I've tried to readd it and it doesn't work. I have no need for a computer without internet.
I have a maverick box plugged into two monitors, using the open source radeon driver and randr. Each monitor has a top and bottom gnome panel, with various widgets in each. There is no /etc/xorg.conf. The Problem: If I 1) remove both monitors to plug the box into my HDTV, or 2) connect to the X server remotely from a laptop, the panels all get shoved onto the one display. Do you have any advice on how I might specify different gnome panel 'profiles' for the different uses of this computer?
Just upgraded a dual monitor install of ubuntu from 10.10 to 11.04, reverted to ubuntu-classic (gnome desktop), changed to metacity window manager, but the panel applets (clock, window liet, notifications etc..) only run on ONE of the two screens (:0.0 and :0.1), the other screen they always crash when I try to add them to the panel. how do i get applets to run on BOTH screens at the same time like they used to.
I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find.
If it matters my system is like this:
Archlinux Linux 2.6.36 Xorg 7.6 X server 1.9.2
Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules)
When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr.
Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?
I'm having some issues getting my two monitors (both 1600x900) to work well with Xinerama. The first thing I'm having trouble with is getting 1 wallpaper to span across both monitors..from what I've googled it's sounds like I'm not the first either The 'span' function in the change wallpaper window doesn't do it. The second thing is that I would like the panels to stretch across both monitors well, or at least be able to create another panel on the 2nd monitor which I can't do now.Here's my xorg.conf file:
i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
I'm using openSUSE 11.3. I have a external monitor, and my setup is that when it is connected the panel is expended on the left. (Extended desktop)When I maximize any window in my external monitor, the window gets under the panel, instead of getting maximized properly. Is this a bug?I just tried to move the panel to my laptop's desktop, and the size of a maximized window in that screen gets adjusted properly. So I guess it is a bug related to the extended desktop
I am using Fedora 15 with dual monitors. I want to make an application open automatically on the second monitor. In particular I would like to make Firefox open on the second monitor. For now I am just manually moving Firefox to the second monitor, but if I close it down and open it again, it automatically opens on the first monitor. Is there a way to make it automatically open on the second monitor?
I have two Nvidia cards in my machine. I did have one monitor connected to each video card, but I was unable to get a dual monitor set up to work like this, so I plugged both monitors into one card and the dual monitor set up works fine like. Is there a way to make dual monitors work if you have a monitor connected to each video card? When I had a monitor connected to each video card, I could see the second monitor in the Nvidia settings, but it always disabled it. I could enable it, but it would grey out twin view. After I enabled it, I'll restart the X server, the second monitor would auto disable again.
I'm using Gnome, I don't have the above issue in Xfce4 - it works fine with one monitor connected to each card in Xfce4. However, I want to use Gnome. I've searched, but have not been able to find a solution to either of these issues. I read you can fix the application to launch in a second monitor with wmctrl. I've tried to install it with yum, but I get the message: No package wmctrl available.
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
I am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
When I start the tightvncserver (vncserver -geometry 1600x1024 :1) and then connect to it with a vncviewer (tightvnc 1.3.0 on Win7 or vncviewer on 9.10) and then start a terminal (gnome-terminal or xterm) the m key it opens the envelope tab on the panel. The 's' key opens the shutdown applet.This did not happen on 9.10, or earlier
Someone on the forums had me uninstall pulseaudio to get pSX working, and now I don't have a volume control icon on the panel and when choosing to add stuff to the panel it isn't available.I re-installed pulseaudio through the package manager, but I have a feeling it didn't install everything that uninstalled with it.
I have had this problem with all installations of Maverick Meerkat. Moving the default clock from the upper panel to the lower panel makes it bahave strangely. When clicked on, it now appears in the middle of the screen (sometimes even higher depending on resolution). This never happened prior to Maverick Meerkat.
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
I'm new to Ubuntu and really like it so far, having come from a PC background up to now. I've installed it on my Acer laptop and all is well there. However, on my desktop, the screen resolution doesn't match the Ubuntu desktop and fonts and graphics are very blurry. The hardware I have is:
When I check the resolution using System > Preferences > Display it says that indeed I'm using 1680x1050, which should be correct. However, the bottom of the Ubuntu desktop is cut-off, below the bottom of the screen, so I can only see the very top edge of the bottom panel. The top panel is also slightly cut off, missing about the top 20% of the panel. Left and right seem to be in line OK. The resulting blurriness of fonts makes it fairly unusable until I get it fixed.
I've searched fairly extensively and I realise there are other threads on this so sorry for posting again, but they all seem to be slightly different problems and all the responses are fairly or very technical. Maybe I can't avoid a technical solution and getting my hands dirty with a terminal prompt, but I'm hoping I can fix this without resorting to stuff I don't understand and might get wrong. I'm a technically minded end-user but not a unix guy.
So I take a glance at the time, and realize the clock has been showing the same hour for ages.Basically, if I use the gnome-panel menu for launching empathy the panel freezes. The workaround that I use is switching off showing seconds and switching it on again on the date format menu of the panel. (I never used seconds on the date format, but that way you realize the panel is frozen)I've seen this behaviour in two diferent computers I use, any hint on what may cause this? Every applet keeps working as usual, but the menu display is frozen.I'm on 10.04, using version 2.30.2 of gnome. Steps to reproduce: click on the envelope icon of the menu and launch xat. It only happens the first time (when empathy is loaded) and it gets solved if you start empathy through sessions or whatever (The problem with the sessions workaround is that I can't manage to make it started without focus).
After a fresh install of Fedora 12 I'm delivered to the image on the attachment. Well aside from not being able to see icons on the left, or go to the any terminal and not seeing anything and be forced to blind type and hope for the best there are some other issues. Enabling panel transparency shows video artefacts on the panel.nouveau doesn't enable 3D(I use a NVidia GeForce 9600 GT 512MB and my monitor is a ACER LCD X223W)) kind and point me to resources about the nouveau driver and how to configure it so it starts to work?
So I just updated my IdeaPad to Natty and played around with Unity. The performane was absolutely unbearable so I installed Unity2D from the software center. Now when I start the session everything seems to be fine at first. Whenever I move the mouse over the panel though it seems to switch to my old gnome-panel from the "Classic" session (with some missing icons). When I move the mouse over that panel again it switches back to the Unity panel style. What is going on? Can I fix this somehow? I will have to use the classic session until I get a working consistent behavior
