Ubuntu :: Xinerama And Dual Screens - Create Another Panel On The 2nd Monitor?
Jun 6, 2010
I'm having some issues getting my two monitors (both 1600x900) to work well with Xinerama. The first thing I'm having trouble with is getting 1 wallpaper to span across both monitors..from what I've googled it's sounds like I'm not the first either The 'span' function in the change wallpaper window doesn't do it. The second thing is that I would like the panels to stretch across both monitors well, or at least be able to create another panel on the 2nd monitor which I can't do now.Here's my xorg.conf file:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0[code]....
View 1 Replies
ADVERTISEMENT
Apr 20, 2011
Today I bought a new monitor (IPS236V) to use it to watch movies and tv while I'm working on the other one.. I thought it's the best to activate Xinerama which could be done easy via CCC. But I'm not able to change the resolutions now as these panels are disabled in CCC. The first monitor is set to its native resolution, but the second is something lower.How can I configure both monitors to there native resolution?
View 5 Replies
View Related
Jan 28, 2010
I reinstalled and forgot how I added a panel to my second screen, cause when you add a panel you choose left right top or bottom, but no option for second screen... finally I added a new panel, then right click on the new panel> properties, then unchecked "expand" then was able to move the new panel to second monitor, then set to whatever side and recheck "expand" then it sticks to the second screen, then add to panel, and select window list, then all new windows will be shown on the appropriate panel/screen
View 4 Replies
View Related
Nov 25, 2009
with KDE everything works fine (both monitor show their configured displays correctly), however oddly with gnome when i try and setup dual monitor display, i get blank screens on both monitors, however on the display 0 on the left side there is a full column single pixel width green strip. the rest of display 0 and 1 are blank, however my mouse will move around both display correctly.
View 1 Replies
View Related
May 28, 2010
Setup:Ubuntu 10.04 recently upgraded from 9.10Dell Precision m63004G RAMCore 2 DuoDual Monitor with laptop=screen0 monitor=screen1external mouse and keyboardIssue:In both 9.10 and 10.04 (I am just now trying to solve the issue) the setup works great, but not flawless.External mouse and keyboard work with no issue.The touchpad mouse on the laptop, however, will not switch from screen1 to screen0. It works fine on either screen and will go from screen0 to screen1, just will not return. One has to hook up an external mouse to get the cursor back onto the laptop screen0.
View 5 Replies
View Related
May 6, 2011
I did set up dual monitors few times on few of my boxes, with 3 video cards :
Radeon 9250 AGP (have 2 of them) - with open source ATI driver
Geforce 6200 PCIE - with nouveau driver
In all cases I connect 2 LCDs. one 1440x900 or 1680x1050 to DVI and one 1280x1024 to VGA (all the cards have DVI and VGA out). The LCDs are the same ones tested with all cards :
1440x900 : Benq FP-92W
1680x1050 : Teac T2005L15 (identified as KTC2002 in xorg)
1280x1024 : Proview PQ-721KP
Tried on different boxes runnning Arch linux, different kernel / x / drivers / kde versions
Problem is - in all those setups, one monitor allways randomly blanks for a split second and comes back (incl. switching of the backlight, and displaying the "Source : VGA" or "Source : DVI" title as if it was switched off and on)
This happens randomly, but (more pronounced with the ATI cards) related to me clicking on stuff or the display changing (even if the changes are on the second screen)
With the Radeons only the monitor connected to DVI blanks. And the 2 radeons do it in different frequency, one is more often and one less
With the Geforce only the monitor connected to VGA blanks
When I test with 1 monitor (other one disabled in xorg) : Radeons sometimes still do that to DVI monitor but rare (much less than with VGA connected) (VGA monitor never blanks). Geforce does not do it at all and has problem only when 2 monitors are connected
I first thought its a hardware issue (the cards are from junk), but it happens the same with totally different hardware (exceps using same monitors) so i no longer think it is
There is nothing interesting in Xorg.0.log
View 2 Replies
View Related
Apr 7, 2011
I have a dual monitor setup in 10.10, which acts as an extended workspace.
In previous versions of ubuntu, I could move panels around by grabbing them and moving them to the area within the second monitor.
In 10.10, I cannot seem to do that.
How do I create panels in this extended workspace on the second monitor?
View 2 Replies
View Related
Apr 29, 2011
Just upgraded a dual monitor install of ubuntu from 10.10 to 11.04, reverted to ubuntu-classic (gnome desktop), changed to metacity window manager, but the panel applets (clock, window liet, notifications etc..) only run on ONE of the two screens (:0.0 and :0.1), the other screen they always crash when I try to add them to the panel. how do i get applets to run on BOTH screens at the same time like they used to.
View 3 Replies
View Related
Jan 23, 2010
I use 2 monitors under Ubuntu 9.10, but I have them set up in a unique way. The primary (CRT) faces me on my desk, but the other (widescreen LCD) is turned away from me, because I use it only to watch movies from my couch. My video card is an Nvidia GeForce 9800 GTX+, using the proprietary Nvidia driver package, with Xinerama turned on, so the desktop extends across both displays. Given that setup, is there any way to control which display applications open upon? Several apps have started opening on one display or the other, seemingly at random. Further, some apps start on the primary display, but open their subwindows on the secondary display. It's very annoying, because I can't see the second screen, so I can't drag the windows back to the primary desktop.
I would also like to have VLC Media Player (or any other app) always open on the secondary screen, on purpose. I almost never watch movies sitting at my desk, but rather from the couch. I placed a VLC launcher icon on the secondary screen, but when started it opens on the primary display. (If you're wondering how I can click on anything from my couch, I have a wireless mouse there in addition to the wired mouse at my desk. It's my "remote" since I don't have a TV. Xorg will quite happily support 2 or more mice simultaneously, I discovered.)
View 2 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Jun 6, 2010
UPDATE: I can get the wrapping to stop, but it offsets the image between monitors. It's like the center monitor's image was stretched upward, distorting the alignment with the side monitors, rather than just providing additional space at the top. If I switch it so the two side monitors are 120px lower than the center, (as i had it in 9.04) then the wrapping issue occurs again. This is frustrating. I could use some help. (64-bit Ubuntu 10.04)
After lots, and lots, and lots of googling, configuring, experimentation, and even unplugging and replugging, I finally got all 3 monitors working like I had them in 9.04... Or almost. The center monitor is larger than the two side monitors, being 1920x1200 compared to 1920x1080. When I move the mouse pointer on the center monitor, it hits a ceiling and disappears right around that extra 120 pixel area on top, and can be seen at the bottom of the screen.
[Code]....
View 4 Replies
View Related
Jan 10, 2010
I would like to adjust Xinerama to place 1 desktop on each of my 2 monitors and not stretch a single over both. With the current set up there is a problem with window placement upon opening new widows or context dialog boxes. I realize that I could adjust placement properties and select window placement with the mouse but this is still lacking in productivity. My monitors are not next to on another so this is more of a problem than it seems.
View 4 Replies
View Related
Feb 3, 2011
my 4 WS screens in the bottom panel have suddenly gone really wide. They take up most of the panel now and things are getting squashed when I have a few programs open.Can't see any options to adjust the size/width? Using 10.10
View 3 Replies
View Related
May 11, 2010
I am using 10.4, and an NVIDIA 5500 video card, two screens....
I have a problem with the Panel, top and bottom. It only shows on the main screen. When I set-up it showed on both, right across, was beautiful. I was quite happy to live with the shrunk down version until I noticed two things:
1. If an app or document is in the second screen (in this case the left) then it does not show up on the panel, until I drag it to the primary (right) screen.
2. Documents open in the secondary screen in full screen mode have a "white out" banner (which I assume is the hidden Panel) across the top and bottom ribbons. This is a BIG problem, because it means there is no access to the Max, Min, Close and drag facilities, and as it is not visible in the Panel that is showing, read 1 above, then it just sits there.
Screen shot enclosed. Not the min, max on this are the doc, not the ap... But you can see the blank Panel.
View 1 Replies
View Related
Jul 18, 2010
I use multiple screens on my computer in work which is running Ubuntu 10.04 it runs great apart from the VBox VM. I run a windows VM as some apps we use in the office are not compatible with ubuntu and I can't get them running right in wine. In single screen mode I use the VM in 'seamless' mode so the windows start menu just sits on top of the ubuntu panel and I can flip from ubuntu to windows as I please in the same interface (im sure anyone that uses VBox will understand what I mean).
The problem comes when I use a second screen. If I try to run in seamless mode on the main screen it works ok apart from the fact that the windows start menu sits behind the ubuntu panel instead of on top of it. When I move the VM to the second screen I cannot run it in seamless mode at all, if I try the resolution goes hay wire and I only get half the screen (if im lucky). So I just run it in full screen mode which stops me from dragging windows from within the windows VM back to the first screen.
What I want to be able to accomplish is to run the VM in seamless mode on either screen but be able to drag windows accross both screens. Is that at all possible?
View 2 Replies
View Related
Jun 25, 2010
This happened after ubuntu pushed an nvidia graphics update about a week ago, on upgrade I booted up into this:Obviously I had to take this picture with a camera, since a screenshot only showed one screen. It's perfectly usable like this, except that it's too small to read.I of course have tried 'sudo nvidia-xconfig', and a minimal xorg.conf:
Code:
Section "Device"
Identifier "Default Device"
Driver "nvidia"
EndSection
Along with purging and reinstalling all of the nvidia packages numerous times. I'm currently running on the VESA driver, which sucks. My chipset is a 9200M, but like I said, it worked perfectly before the last upgrade. In all my years of using linux and kubuntu, I've seen and fixed numerous nvidia driver errors, but I've never seen one this strange, usually it will run or not run.
View 5 Replies
View Related
May 23, 2010
Just a day ago I did a clean install of 10.04, after wiping the disk clean of 9.10. So far everything's working great. Except for my old dual-screen configuration. A year or two ago I badly wanted to have 2 monitors, where both would share the same desktop/workspace allowing me to drag windows back and forth between the two. After a lot of research, I finally was able to put together (although a probably quite sloppy) xorg.conf file that did the trick for me.
My case is somewhat unique in that my left monitor is horizontal, while my right monitor is rotated 90 degrees, and is vertical. In 10.04, my old xorg.conf file sort of works, but I have problems on my right, vertical screen:
- when I move my cursor onto the vertical screen, when I try to move it above where my left, horizontal screen's boundaries end, my cursor jumps down to the bottom of my vertical screen. I can't access anything with my cursor above this boundary on my vertical screen. Note that my vertical screen's bottom is in aligned with my horizontal screen's bottom, and that the vertical screen sticks up above the horizontal screen, as both have a 1680 x 1050 resolution/widescreen aspect ratio.
- however, it appears that only my cursor is having issues accessing the upper part of my vertical screen. When I maximize windows in this screen, they properly fill it up entirely like they should. (but I still can't access the top parts of these applications with my cursor).
So obviously there must be some boundary managing where my cursor is allowed to go, and another set of rules defining the boundaries that the windows themselves can be shown/take up. Also note that because of my right monitor being rotated vertically, I'm forced to use Xinerama. Can someone help me go through my xorg.conf file, below, to help me get this "simple" cursor issue fixed? I'm sure it's just one minor thing that has to be changed, but I'm not sure what:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
# xorg.conf (X.Org X Window System server configuration file)
[Code]...
View 1 Replies
View Related
Aug 5, 2010
I have dual monitors that I have set up with two separate X screens with the nVidia control panel. For some reason at times when I move my mouse between the two screens, the cursor will start flickering rapidly between the adjacent edges of the screens and the system will become completely unresponsive, forcing me to do a hard reboot (the keyboard doesn't have a SysRq key).
View 6 Replies
View Related
Dec 30, 2010
how Xrandr supports Dual screens. I am attempting to setup Dual Screens on a Ubuntu 10.10 System with an ATI twin head card (DVI + HDMI) Non-mirrored, separate desktops However on connecting a device to the HDMI output - the DVI screen output appears to loose all panels, icons. Only the mouse pointer & desktop background remains.
I believe the output is defaulting from screen 0 to screen 1. I found a solution by creating two devices in xorg.conf and assigning one for each separate screen. BUT this created a new problem of loosing my mouse pointer. how I can get my mouse pointer working or the correct way to setup dual screens.
[URL]
View 9 Replies
View Related
Mar 30, 2010
My setup:
One computer running F12.
NVidia with 2 CRT outputs, and one S-Video/TV output
Standard PS2 keyboard and mouse
USB (wireless) keyboard and mouse
Sound card w/ Optical SPDIF, and standard analog front/rear outputs
At present, I have CRT-0 connected to a standard monitor that I can get resolutions up to 1920x1440. TV output is connected to a flat panel monitor, with a max resolution of 1024x768. SPDIF audio output connected to TV system, and analog output (front only) connected to destop speakers. Note that the monitor/speakers are in one room, and the TV w/ SPDIF audio is in another, with the USB kbd/mouse.
I can get a cloned twin view set up on both, with the USB kbd & mouse/TV/SPDIF mirroring the monitor/PS2 kbd & mouse/speakers - but only at a max resolution of 1024x768. That by the way needs to be the virtual screen size for the TV. If I want to switch between the two max resolutions (one when using the monitor, the other the TV) I have to edit xorg.conf and change the modes line for the display, then restart the X server.
I would like to have the monitor set up to its max 1920x1440 resolution with a virtual screen size the same, and the TV set up for 1024x768 with that for its virtual screen size. I also would like the separate kbd and mice to operate with the respective screens. Ideally, each screen would be independent of the other - running two different apps on each output, similar to separate workspaces. Is something like this possible? It's a pain to have to re-edit xorg.conf and restart X every time I want to switch from watching TV to working on my monitor.
View 4 Replies
View Related
Feb 23, 2011
After dowloading and install the latest x64 drivers, i am unable to setup my dual monitors. Everytime i go to CCC > multi display > single display desktop, as soon as i hit Apply the window just disappears. If i go to Monitors and turn the other monitor ON, i get an error popping up saying something along the lines of "required virtual size does not fit"
Card: ATI 4870
Moniors: 24" Dell, 20" Dell
Desktop Env: gnome
Fedora 14 + all updaed
Here is a /var/log/messages
Code:
Feb 23 22:49:38 Fedora kernel: [ 17.704795] [fglrx] Firegl kernel thread PID: 2269
Feb 23 22:49:38 Fedora kernel: [ 17.704846] [fglrx] Firegl kernel thread PID: 2270
Feb 23 22:49:38 Fedora kernel: [ 17.704895] [fglrx] Firegl kernel thread PID: 2271
Feb 23 22:49:38 Fedora kernel: [ 17.705059] [fglrx] IRQ 49 Enabled
[code]....
View 2 Replies
View Related
Sep 8, 2010
I'm using an Intel chipset GMA4500 and Ubuntu 10.04 Gnome. The monitor configuration tool does not seem to have an option to make the secondary screen a mirror image of the primary screen. It works fine when I connect my TV using HDMI as a second screen, but I want it to be a mirror of the primary, because some apps like Skype will only go "full screen" on the primary display.
View 2 Replies
View Related
Dec 31, 2010
After installing a second screen and trying dual screens, i never backedup the x11 xorg.config file and recklessy overwrote my settings through that nvidia panel... Now to find that x wont start :(EE) no devices detected Fatal server error: No screens found
how i'd be able to share my xorg.config file with you guys, I am using my ipod now... Anyone knows anything? I tried reconfiguring and didn't work.. How do i share my file so you guys can find the flaw? Or how do i find the flaw myself?
View 5 Replies
View Related
Jan 2, 2011
I have my computer set up to use separate x screens for both of my monitors and almost everything works perfectly. With this set up I don't have any problem displaying flash in full screen on either monitor like I had with twinview. I have it set up this way so that I can use my TV to display mythtv and still use my computer monitor to browse the web, etc. The only problem is that I use my iphone with hipporemote to give me a wireless keyboard/mouse. When using twinview this was not a problem as it was just one large desktop spread over two monitors.
However, switching to separate x screens seems to have broken the functionality of the vnc server. When using my physical keyboard and mouse I can just move the cursor off the side of monitor 1 to control monitor 2, however, if I'm connected via vnc the cursor gets "trapped" inside the active monitor. I can interact with each screen as expected but if I want to switch the mouse/keyboard focus to the other monitor I have to go to the computer and move the mouse to the desired monitor, which obviously defeats the purpose of using the iphone as a wireless remote.
So my question is this. Is there a way to assign a hotkey combination to switch the focus of keyboard and mouse that the vnc server is controlling? Or could I set the vnc server to only control one of the two x screens?
View 1 Replies
View Related
Sep 23, 2010
Red Hat Enterprise Linux 5.5 I want to script to run dual screens if the port of the screen displayed in
View 2 Replies
View Related
May 20, 2010
I just right clicked on my top panel and clicked on new panel, and it's created padding around my maximised windows and now panels show up :S:SS:S
View 6 Replies
View Related
Jun 8, 2010
The 'Multiple Screens' tool, aka grandr, is very handy for setting up my dual monitors. But restarting my system restores the monitor setup to the (crummy) default settings. Is there a way to save these settings and make sure they are always applied when the OS boots? Putting these settings in my xorg.conf would be fine, but I'm not sure where or in what form the settings generated by grandr might be located, or if they're at all xorg.conf compatible.
View 2 Replies
View Related
Jul 12, 2010
I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine).
Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?
View 3 Replies
View Related
Sep 23, 2010
I have a problem in Red Hat Enterprise Linux 5.5 does not work dual screens for devices at work Kick Start
View 1 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
