Ubuntu :: Alternative To VNC Doesn't Start Automatically?

Feb 3, 2010

I'm using vnc to connect to my ubuntu box from my windows box however I don't like the way it works.1) It doesn't start automatically. I have to be logged into my username before I can connect to my box.2) It takes control of the screen on my ubuntu box which isn't what I really want to happen. I'm used to connecting via rdp in windows where I connect to the other computer and if you looked at the other screen you wouldn't even know I am logged on.This is handy if someone else is using the pc plus I just don't like everything that I am doing to appear on a computer screen that I can't see. I find it kind of freaky.

View 5 Replies


ADVERTISEMENT

Ubuntu :: AWN Doesn't Automatically Start?

Apr 30, 2010

I upgraded to 10.04 and my AWN dock won't automatically start even though the 'box' is tic'd and it's showing in the Startup Applications. I did lose all of my configurations as well after upgrading and had to reinstall everything on the dock.

Also, there are little numbers on the launchers like for Trash and Email that tell me how many items are in there. The Trash was easy to remove the numbers by right clicking and choosing the Preferences option. There was a place to disable that but there isn't one for the Email and those little numbers look well.

View 4 Replies View Related

Debian Multimedia :: SMplayer Doesn't Automatically Start Playback

May 22, 2011

I have avi, mpeg etc files associated with SMplayer. When I double click a file SMplayer DOES lunch but it never starts the playback. Not even the play key is active, and the seek bar and volume bar are frozen. If I go Open-->File and chose a file, everything works great.

View 14 Replies View Related

Ubuntu Installation :: Gnome-wm Doesn't Start At Boot Time Automatically After Upgrading To Lucid

Feb 23, 2011

I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:

"Your window manager does not support the show desktop button, or you are not running a window manager."

After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.

View 9 Replies View Related

Ubuntu Installation :: Gnome-wm Doesn't Start At Boot Time Automatically After Upgrading To Lucid Lynx?

May 14, 2010

I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."

After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround

View 4 Replies View Related

General :: Slackware 13 Automatically Lock - Ktorrent Start Automatically?

Jan 25, 2010

what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?

View 2 Replies View Related

Ubuntu :: Start Synergy On Startup Wont Start Automatically On Server

Oct 13, 2010

Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:

[code]...

but still no dice.

View 9 Replies View Related

Fedora :: Start Using SPICE As An Alternative To NX?

Apr 13, 2011

SPICE has been getting there for a while now and seems to be a very capable mechanism for running remote desktops. (You see where I'm going?) Virtual desktops have a good chance of becoming all the rage if SPICE gets a low enough latency implementation. But what about applying that low latency implementation to running over a physical layer? Who says the host machine has to be a virtual box? (See where I'm going now?) Does anyone know if I can start using SPICE as an alternative to NX for example?

View 3 Replies View Related

General :: How To Get Conky Start Automatically When Start Fvwm

Sep 22, 2009

I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?

I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.

View 10 Replies View Related

Ubuntu :: 11.04 Slow - Start Up Time Is 30 Minutes But It Usually Doesn't Start Up At All

May 4, 2011

I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.

I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.

I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.

View 8 Replies View Related

CentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start

Sep 2, 2010

I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !

DHCPD.CONF
ddns-update-style interim;
ignore client-updates;

[code].....

View 3 Replies View Related

Ubuntu :: Wifi Won't Start Automatically?

May 16, 2010

After restart or suspend/resume the Wifi won't start until I click on my home network from the menu. It used to start without me doing anything (once I setup the wireless).

View 1 Replies View Related

Ubuntu :: 10.10 Won't Start Gnome Automatically?

Dec 5, 2010

After installing some updates recently, 10.10 boots into a command line. I have to type sudo gdm to get into Gnome, at which point it works fine. How can I make it start Gnome automatically again?

View 2 Replies View Related

Ubuntu :: Start Filesystems Automatically At Boot?

Mar 4, 2010

When I go to 'Places' on my panel, my windows drives are listed. I can click on one, it then asks me for password, then it puts a hard drive icon on my desktop. This is excellent.They are listed as '200 GB Filesystem' etc.My only problem, is how to make these icons stay after I shut down. I don't want to do this every time I boot up.

View 4 Replies View Related

Ubuntu :: Mount Partition Automatically At Start?

Mar 28, 2010

recently i was trying to mount my partition automatically at start up ...so i gone through some tutorials on the net nd made some changes in /etc/fstab file (i made a back up before making any changes). when i was changing permissions of folder in which i tried to mount my all partitions i got my system screwed up.then it was showing following error at start up and GUI was not turning up. "could not update ICEauthority file " also my sudo was not working so first i restored original fstab file through recovery console then i googled out about above errors. I found some solution now my system is working but showing strange behaviour like:

> ubuntu is not detecting any of my hdd partition

> disk utility is not working (showing no error)

>fdisk -l shows nothing

> no new software is getting installed via ubuntu software center (shows no error when clicking on install but nothing turns up)

>i cannot restart or shutdown my system from GNOME it only logs off my session (although through terminal its working)

>no media player showing sound controls enabled

>gnome not showing ethernet or sound volume icon in upper panel (although net is working)

>users and groups from system->administration menu is not working (error:cannot load configuration)

i think most of the administrative tasks are not working.........i googled out but found nothing satisfactory..i dont want to reinstall it, coz i m not very experienced with linux n it took about a whole month to customize my ubuntu 9.10 on my college internet...

View 6 Replies View Related

Ubuntu :: Wireshark Automatically Start With Sudo?

Feb 2, 2011

I am trying to use wireshark on my ubuntu 10.10 laptop. However I have found out that wireshark will only detect my network cards when it is started with root permissions. How would I make it automatically start with root permissions?

View 2 Replies View Related

Ubuntu Networking :: Eth1 Does Not Start Automatically

May 2, 2011

I have static eth1 defined. When I boot or restart, the networking will not start automatically - i must do it from terminal by ifup eth1.

Where can I put this command to have it autostart?

View 5 Replies View Related

Ubuntu :: Make A Command Run Automatically On Start-up?

May 27, 2011

I have a lenovo thinkpad laptop, and it has both touch-pad (standard build in laptop mouse) and touch-point (in the middle of the keyboard) mouse options.

I almost invariably use the touch-point and the accompanied scroller and key-buttons.

HOWEVER, for the scroller to be recognized by ubuntu you must run two scripts as follows:

xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation" 8 1
xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Button" 8 2

Restarting the computer resets these settings, and you must re-run them each time you start up ubuntu.

I am looking to write a script that will automatically run itself (which will execute the above commands), or to permanently change these settings so that it will not be necessary to run them at each start-up.

Thanks in advance, and if there is another thread on these forums that I should move to (or even just another thread that would be a more likely place to get a response). This seemed like the best forum (one which can certainly hold this post without violating any rules), but I may have missed something.

View 4 Replies View Related

Ubuntu :: KDE/Plasma Does Not Start Automatically Anymore

Jun 13, 2011

After upgrading my husband's laptop to 11.04, KDE does not start automatically anymore. kdm (the log-in screen) appears. I select "KDE Plasma Desktop". But instead a kind of terminal appears in the top left corner. This console does not have window decoration. When I type startkde into it, KDE starts completely normally.

The same happens with a newly created user, so a misconfiguration in .kde cannot be the cause.

/usr/share/xsessions/kde-plasma.desktop is correct:

Code:

The metapackage kubuntu-desktop is installed.

I have tried reconfiguring and reinstalling various packages that I or others thought might be responsible:

Code:

GNOME was installed on the same computer, too, and caused some problems after the upgrade (instead of KDE being the default session, it was Unity, but no menus or control bars loaded). After trying all the things mentioned above, I uninstalled all GNOME/Unity-related packages to rule out they were causing the problem (according to that list: [url]). It did not help, even though for two packages messages appeared that sounded like they might make a difference:

Code:

I compared with

Code:

With my other two computers that work fine after the upgrade to 11.04, they also use startkde and kwin.

View 9 Replies View Related

Ubuntu :: Get Kubuntu To Automatically Go Into Boot From Cd On Start Up?

Jul 16, 2011

My son dropped my laptop and broke the screen so I decided to use it as a project.

1 I managed to install kubuntu on it unfortunately it was the 64bit version not the 34bit one. The problem I'm having is that the external monitor only works after kubuntu boots up so I can not view the set-up boot options. What I want to do is put win 7 on it as I have a mate that needs a computer and he is pretty computer illiterate.

2:It will boot into G-parted and I have made a ntfs partition for the win 7 OS to go into. I have another duel boot desktop so followed what I did with that.The problem is that as I cannot see the initial start up screen and can get it to boot from the win7 boot disc that I have(this is a working cd I have used before) Is there a way I can get Kubuntu to automatically go into boot from cd on start up etc?

View 8 Replies View Related

Software :: How To Get Apache2 To Start Automatically On Ubuntu 10.04?

Jul 28, 2010

It starts fine with the /etc/init.d/apache2 start command, but I would like it to start automatically when I boot my system.

View 2 Replies View Related

Fedora :: SSH Won't Start Automatically

Sep 11, 2009

Can you guys help me diagnose what the problem is? SSH doesnt' start automatically.

View 1 Replies View Related

Ubuntu :: Desktop Drapes Won't Start Automatically On Login

Jan 21, 2010

I have it configured in the application settings to do that, and I've checked the Startup Applications and indeed it is listed there.However when I start up the icon doesn't appear in the tray and my wallpaper won't change every 10 minutes like it's supposed to until I actually go to System > Preferences and run Desktop Drapes manually.

View 2 Replies View Related

Ubuntu Installation :: CUPS / Samba Does Not Start Up Automatically

Jan 24, 2010

After my update to 9.10 I had not notice that CUPS, Samba, lighttpd (and maybe other serives that I've not missed until now) don't start up during system start no longer. After all, things look quite normal in the directory /etc/rc3.d, which has the appropriate links S20samba, S20lighttpd and S50cups, all of them working when I use them directly. But wait! Ubuntu uses updstart now, does it? I have yet to understand what that means to the classic startup scripts in /etc/init.d.

View 9 Replies View Related

Ubuntu Networking :: Avahi-daemon Won't Start Automatically Sometimes?

Jan 25, 2010

Since I've updated to 9.10 my avahi-daemon sometimes won't start at boot.I've to "restart" it manually.I reinstalled it without success.Has anyone here the same problem? Or a useful solution?

View 1 Replies View Related

Ubuntu :: HD Start Running Automatically And Strange Log Activity

Mar 16, 2010

The hd starts running on it's own and I check the log files and find this:

Code:
Mar 16 21:28:47 ubuntu kernel: [16953.273544] VFS: busy inodes on changed media or resized disk sr1
Mar 16 21:28:47 ubuntu kernel: [16953.293541] Buffer I/O error on device sr1, logical block 26827
Mar 16 21:28:47 ubuntu kernel: [16953.293550] Buffer I/O error on device sr1, logical block 26828
Mar 16 21:28:47 ubuntu kernel: [16953.293619] Buffer I/O error on device sr1, logical block 26827
Mar 16 21:28:47 ubuntu kernel: [16953.293623] Buffer I/O error on device sr1, logical block 26828
Mar 16 21:28:47 ubuntu kernel: [16953.293645] SQUASHFS error: sb_bread failed reading block 0xcb75
Mar 16 21:28:47 ubuntu kernel: [16953.293649] SQUASHFS error: Unable to read fragment cache block [32d1bc4] .....
Mar 16 21:30:47 ubuntu kernel: [17073.066145] Core dump to |/usr/share/apport/apport pipe failed

View 4 Replies View Related

Ubuntu / Apple :: Service Start Automatically On Login?

Sep 27, 2010

I followed the directions in the MacBook7-1 setup thread for lucid to install pommed: [URL]... This works well, I can control brightness, volume and keyboard backlights using the function keys.

However, pommed doesn't start automatically on login. I have to maually start the service. Is their a way to have this service start automatically on login?

View 3 Replies View Related

Ubuntu :: Automatically Start Apps In Terminal With Titles?

Sep 28, 2010

One of the first things I do when starting Ubuntu (Netbook Edition) is to open a Terminal (ctrl-alt-T) with three tabs in it (ctrl-shift-T, ctrl-shift-T), one with irssi, one with ipython and one extra with just the commandline. Then I set the titles (F2) of the first two respectively to "irssi" and "ipython".Is there some way to write a script that automatically does all this? Or maybe save this configuration in a profile setting or something?

View 3 Replies View Related

Ubuntu Servers :: Start Squid Automatically With -D Argument

Jan 10, 2011

I am on Ubuntu 10.04, running Squid 2.7.STABLE7 Squid refuses to start on my machine unless I give it the -D argument (disable initial DNS tests). I think this is because my machine is offline while I'm testing it, so no DNS server. how to set Upstart to start Squid with the -D argument?

View 2 Replies View Related

Ubuntu :: Make Ibus Start Up Automatically And Quitely?

Jan 20, 2011

I used to input Chinese with scim input method, which can be trigered by Ctrl^Space. But this time, I reinstalled ubuntu 10.04, I have to manually start up ibus from System>Preference>ibus firstly before I can triger the input method by Ctrl^Space.

This is not over, the key problem is there are several dialogues to click "ok" with before I can really use the scim.

How can I make this ibus startup automatically and quitely?

I tried put command "ibus -setup" into my .profile, it does start up the ibus automatically every time when I login, but the dialogues still bothering me.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved