recently installed an NVidia GeForce 240 in my HTPC, and finally got it working correctly (as an HDMI-out display) n Lucid Lynx 64-bit.My problem now is that there is no sound, even though sound should be passing through, and I don't know where to begin to fix the issue.
I have just installed kubuntu 10. My mobo is ASUS p7h55, which hastwo on board sound cards, one for stereo and the other for outputting sound through the hdmi link. When I connect my TV through HDMI, there is no sound. I go to Phonom, and there is only one card in the card selection box.I run aplay -l, and both cards are listed
I am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
The old Nvidia GT220 recently died in my HTPC and I replaced it with a new GT430. Sound over HDMI worked beautifully with the old card (after much trial & error,) but has now stopped working with the new card.Forgot to mention that everything appears to be unmuted in alsamixer. When I run "aplay -D plughw:1,3 /usr/share/ sounds/alsa/Front_Center.wav" I get no sound. I do however get sound from the headphone jack when I do the same command for the onboard sound card (0,0)
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
A friend has intalled Linux after a load of problems with windows. He very kindly installed my Edirol UA25 soundcard, and when i click 'test' on System-preferences-sound, it indeed plays a sound. The problem is that when I try to play anything from the internet on firefox, or any sounds in VLC, or any other application, it doesn't work. I believe I'm running Ubuntu Studio, version 8.04, but I am not sure. I have an Athlon 64 bit processor if that's relevant.
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
I installed Mangler and one of its requirements was pulse-audio. I installed pulse-audio everything worked great except i couldn't get sound out of wow if i started mangler first and vice-versa. I then found a version of Mangler that worked with alsa. So i uninstalled mangler and pulse-audio, installed mangler-alsa. Everything works great now. The problem is when i uninstalled Pulse-audio i lost all my sliders in Yast > Hardware > Sound > other > volume. The only thing that shows up is master volume > Test. My sound works great just can't adjust anything. How do i get my sliders back. I would like some advice before i screw something up. (lol) My Sound card is according to sound configuration SBx00 Azalia(Intel HDA) - Driver snd-hda-intel.Opensuse 11.2 KDE 4.3.5
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD Sound Blaster X-Fi Xtreme Audio Asus Xonar DS
sound card is working well inside SuSE and everything is ok there. But when I install Windows 7 or XP inside Xen Virtualization software, I can't use sound card and Windows is unable to find any sound hardware.
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
I messed with some settings (not exactly sure what I did) while trying to get a USB headset to work, and now I have no sound at all. It's acting like it doesn't recognize any soundcard (I'm using a Thinkpad W510 with integrated sound).
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
I'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like
mplayer -delay -7 - < /dev/mic
but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...
I'm running WinXP Pro on a Dell XPS 710 with a Creative X-Fi sound card. Been away from Linux for a year or so since I got this machine and would like to come back. Can you suggest/recommend a sound card (5.1 preferred) that has a high success rate with the Linux OS. I will probably install Open Suse or Kubuntu. I'm more than willing to dump the high end sound card for less flash.
I'm relatively new to debian, but an intermediate linux user. I've just installed wheezy and I'm having trouble setting sound up. When plugging my headphones in via the motherboard, sound works fine. Great. I plugged in my USB Sound Card (Audiobox 44VSL) and no dice. It's set as card 1 under aplay -l, yet no sound. I know this box works on GNU/Linux because I used to use it in Xubuntu a couple years ago with no problems at all.
My PC has the ASUS P7H55-M SI motherboard with the audio chipset VIA VT1708S. Under Fedora 13 (64-bit) I have no sound although the audio chipset seems to be properly recognised and supported by the OS.
I used the alsmixer application and I set the volume for all channels, including PCM to their maximum value but still I get no sound. When the OS boots I hear a "click" sound coming from the audio chipset when it is initialised by the kernel but then the sound stops and I hear nothing.
Note that I do not have this problem with Ubuntu 10.04 but I have the same issue with openSUSE 11.3 Milestone 7. My guess is that F13 and openSUSE 11.3 having newer kernel/alsa software versions exhibit this problem due to some bug introduced to the code.
Here is some extra information:
aplay -l **** List of PLAYBACK Hardware Devices **** card 1: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 2/2