Ubuntu :: 9.10 No Longer Boots
Mar 2, 2010
The left hinge on my Dell Inspiron 1521 cracked and broke. Last night, I removed the hinge since it had frozen in an "up" position. I had to remove the hinge plate to do so. Since then, I am unable to boot my computer. Whenever I boot up, I see the Dell Boot Screen (like normal) and then the screen goes blank except for a the words GRUB at the top of the screen. I've tried using the Live Disk to recover, but I don't have a "Recover" option on the set up menu and prior to installing, the set up client advises that there is no operating system installed and that I have only one partition.
View 2 Replies
ADVERTISEMENT
Jan 6, 2010
I am guising at this point? It took for ever to boot up in 904 Jaunty. All though I never tried the above then and meant to. Thought the upgrade might get it . Now in Karmic Koala. I can get to the grub. Yet any fooling around here it always says unrecognized command. Well really I don't know what I am doing.I have a Intel graphic processor in this lap top I am sure. When it did boot up in 904 the display would mess up. I had upgraded all the way from 804 because I could never get my Alfa usb wifi to work. As for now it will not boot up? Is there any links on the subject? Not sure why this in red it was not on purpose
View 9 Replies
View Related
Jul 24, 2010
I am very much new to the world of Linux, and I just wanted to try out the popular Ubuntu flavor alongside my existing Windows 7 installation. Things worked well at first and I seemed to have the dual boot setup working, until I was notified that there were updates available and advised to install them. I did so, but somewhere along the way something went terribly wrong. When it asked me to restart, and I did, nothing happened. I was not offered the choice of OS, and the screen simply sat there, blank.
View 9 Replies
View Related
May 23, 2010
I installed Ubuntu 10.04 on a USB hard drive after booting the desktop installer ISO on a USB flash stick. My laptop already had Windows XP installed on the internal hard drive and i did not load Ubuntu onto that disk. I can no longer boot the Windows OS. My laptop shows a grub rescue prompt with "no such device" error. I can mount the internal hard disk ("system drive") and see all the Windows files from within the Ubuntu desktop installer. Is there a way to restore my Windows system drive to boot or do I need to reinstall?
View 3 Replies
View Related
Jan 25, 2011
Before we begin just some general information, I'm running on a 64-bit HP Pavilion dv6; This laptop is something you would buy off of best buy's show floor. I installed Ubuntu through wubi in windows 7. I have a 500 GB Hard Drive. As of right now I can explore the windows 7 part of the hard drive.Now the problem began on Friday January 21st after I shrunk my Windows parition by 100GBS leaving around 370 GBS left in windows. Then I went into Ubuntu to try and format the 100GBS to create a space so I can share media in between windows and Ubuntu. ( At the time I didn't realise I could already go into the Windows Partition).
View 9 Replies
View Related
Sep 1, 2011
Ubuntu no longer boots up on my Archos 10 netbook, it's been working fine for the whole month I've had it but now it simply sticks to the Ubuntu loading screen and doesn't progress further. Windows still boots fine so my guess is it's not a hard drive failure that's causing it.
View 5 Replies
View Related
Feb 10, 2010
After upgrading from 9.10 to 10.04 my System no longer boots. I had a Dual-Boot System. On Boot I get - "error : the symbol 'grub_puts_' not found grub rescue> (prompt):
If I run 'insmode /boot/grub/normal.mod' (I get the same error)
If I run 'insmode /boot/grub/ext2.mod' (I get 'The symbol 'grub_xasprinf' not found)
If I run ls /boot (The Kernel File Names look Ok)
If I run in Rescue Mode it Reports (The installer could not find any partitions, so you will not be able to mount a root file system. This may be caused by the Kernel failing to detect your hard disk drive or failing to read the partition table, or the disk may be unpartitioned. If you wish, you may investigate this from a shell in the installer environment.) I ran the recommended reporting script and got the following output:-
Code:
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Syslinux is installed in the MBR of /dev/sdd <<< This is my USB Flashdrive .....
View 2 Replies
View Related
Aug 6, 2010
I'm having an issue getting a triple-boot machine to work. I'm trying to triple-boot Mac OS X Snow Leopard (iAtkos S3) 32-bit, Ubuntu 10.04 64-bit, and Windows 7 Ultimate 64-bit. I install Mac with no issues it boots up and works. In Mac setup I make 4 partitions: Mac, Linux, Linux Swap, and Windows. After Mac is installed, I install Windows. Then Ubuntu. I select to have GRUB installed on the Linux partition. Now when I boot the PC I get a choice of Ubuntu, Windows, memtest, and Mac. Both Ubuntu and Mac work, but when I select Windows, I just get a black screen with a flashing cursor. Files are still intact and nothing has been deleted. I tried booting from the Windows CD, and running bootrec.exe /fixmbr, but all that gives me is no boot device available. I've tried every combination of installing and configuring but can't seem to get it to work. Everything is backed up so I don't mind reformatting and starting fresh if I need to. Also the Windows disk does see Windows 7 when I run scanOS. I can't use the repair option on the Windows disk as it gives me an error saying the CD is not compatible.
View 4 Replies
View Related
Dec 14, 2010
I have tried to keep away from posting this seeing how many have had the same problem but this is getting to the point of me just selling my computer out of shear frustration. Ive got Windows XP and Ubuntu 10.04lts. For a while they all ran fine together till my Windows drive gave out and ever since I tried to remove the drive GRUB recovery has been popping up. I even tried to put the drive back in and the computer still wont boot anything. Ive got 4 different live boots and neither one works, Ive tried to boot with my internal dvd drive and a usb one, there is always a Grub error. When I put in the ls command and find my only non"unknown filesystem" it still says "bad filename". I guess where im getting at is grub wont even let me reformat my computer or boot from anything without saying "no such device: 32d98-e0b3-451b-809b-ae6562ccb701"
View 3 Replies
View Related
Jan 22, 2009
In completely new to Fedora. After a clean install, I went through, configured yum, did all yum updates and rebooted. I then installed the graphics card (m9500 gs) using RPMfusion and restarted again. After doing so, the comp shows the fedora loading bar but once it finishes, it hangs there and you see a small flashing box. I have no idea how to uninstall that nvidia driver.
to my xorg.conf. Still same issue. Finally I went through and added the "notap" to the grub.conf. I am at a complete loss here. When I try and manually load the driver, the Nvidia installer gives and error about not finding any preconfigured kernels for the package. Then It try's to build its own kernel but says its missing the "cc" in the "gcc" package. Any ideas? If you want to know exactly what I've done so far, I pretty much only followed the guide at my-guides.net. As you might be able to tell, I am very NOOB.
View 4 Replies
View Related
Feb 4, 2010
I had, with much delight, accomplished a dual boot install of Ubuntu 9.1.0 and Windows 7 the other day and everything was working perfectly fine. However, I decided to activate the proprietary Nvidia drivers that were available in the drivers menu and my system subsequently no longer operates. After installing and rebooting Ubuntu will no longer work and becomes stuck on a black screen with two white dashes in the top right had of the screen.
This hang up occurs directly after the first white Ubuntu logo appears during the startup and the only key that will work during this screen are Crtl + Alt + F1, which only bring up a second black screen except with a solid white dash in the top right screen. At that point no key will work. I have tried to fix things in recovery mode and used envyng to remove the nvidia drivers as well as other operations, however the same result still appears when I try and run Ubuntu. I own a Sony Vaio Z690C if it makes any difference.
View 1 Replies
View Related
May 11, 2010
I just upgraded from Karmic to Lucid and my system will no longer boot. The upgrade completed without any error messages, but upon reboot, it hangs at the loading screen. I cannot start the system in recovery mode either. Same issue happens. To get to the command line, I've appended:
init=/bin/bash
to the kernel line in grub. I then remount so I have r/w access.
It appears to be an issue with udev. While the loading screen is "loading," udevd_work scrolls a bunch of stuff that's too fast for me to read (nor can I copy and paste it).
/var/log/udev isn't showing any recent errors, only messages from before the upgrade.
View 3 Replies
View Related
Jul 22, 2010
Summary: After intermediate upgrade, Ubuntu Lucid LTS 10.04 64bit Desktop Edition will "NOW" not run in any Graphics mode on my machine.
General; Ubuntu has been my favorite OS to live on, play and relax. I have to use other OS'es, but I choose Ubuntu as "mine". I can go around it safely and tweak it to my own likings and needs. It has also been a great tool to exchange things between other OS'es.
History: I started with Ubuntu Karmic Koala 9.04 64bit Desktop Edition. Last March, I upgraded to Ubuntu Lucid LTS 10.04beta 64bit Desktop via the Update Manager, using Ubuntu's instructions... as a Beta Tester. I kept up with Updates and everything had been fine.All went well, albiet minor adventures that gave me oportunities for enriched challenges and training. Overall, since the early days of that, my system has been very stable and reliable- Until last Saturday through Yesterday...
Problems: First thing I noticed is that there were some security updates Friday. Saturday when I came up into Ubuntu, it came up in error saying it had to come up in a low graphics mode. I shut down the system and restarted. It came up fine and I thought nothing more of it at the time...
Second, I tried to install Ubuntu Lucid LTS 10.04 64bit Server Edition on another drive. My other drives were isolated. Although the install said it was successful, on reboot, it would not boot the system. It would get a purple splash on my screen, then either lockup or go to a text based screen dump. Server Platforms said this was a text based OS and couldn't explain the purple flash or the error... I shelved this project until later and thought nothing more of it.I checked for updates through the weekend (even though there usually isn't any on weekends), and as usual it said everything was up-to-date.
Third, Monday the "Update Manager" said there was too many updates to do at once, that it needed to do a partial update. I selected, but it couldn't complete, because it said that there was conflict on a KDE package that it said it needed to remove, but couldn't because it was in a blacklist. It further said that this could have resulted from a DEV vervion of Ubuntu.
Fourth, I upgraded some packages through the Synaptic Package Manager, to try to reduce the number of packages that the Update Manager was trying to update. All those packages said they updated fine. I then went back to the Update Manager and it still said it needed to do a partial update... but it completed and said it was successful. I noticed that the top of the dialog box was tiltled "Distrubution Upgrade." I noticed that some of the files seemed to be an xorg upgrade... After the update, I had to do other things, so I shut down my system.
That was the last time this machine has been able to start Ubuntu. When Ubuntu tried to startup, it said it had to boot in a low graphics mode, but could not- it blasted the monitor with vertical purple and red lines.I had a copy of the Ubuntu Lucid LTS 10.05 64bit Desktop Edition LiveCD on my other machine. I burned a CD and tried. The only mode I can get to boot from the CD (on my machine) is in a text console- no xwindows system. On starting up an xwindows system will blast the grahics of the monitor, then (sometimes) continue to a monitor test-based screen dump that flashes by until the system locksup.
View 6 Replies
View Related
Aug 7, 2011
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
View 1 Replies
View Related
Oct 9, 2010
i have just installed fedora over a existing copy of ubuntu. The problem is i cant boot in to vista any more. i have looked over many forums trying to fix it but still wont work.the attachments are of screen shots i have with the details of the hard drive partitions.i am able to mount the hard drives and have all the data still and still have the boot folder for vista but just cant figure out how to boot in to vista.i also get the error " error 1: filename must be an absolute pathname press any key to continue" i get this error when i try to change the boot partitons
View 4 Replies
View Related
Oct 29, 2010
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
View 14 Replies
View Related
Sep 19, 2010
I experience this since kde 4, but it never really was that bad because once in a while on updating kde I also deleted the .kde folder in my home-folder and everything was fast again.
But I haven't done this for a while now and kde take really long to load. Is there any folder to clean up there without deleting the whole .kde-folder and loosing all my settings again?
View 14 Replies
View Related
Dec 29, 2010
I just upgraded from ubuntu 10.04 to 10.10 with update manager; now looking through the forums it appears that's not as good as just reinstalling. Upon restart i found myself in a full-screen command line, and I can't get to the familiar GUI.I entered sudo apt-get install ubuntu-desktop and the response was that the desktop is the newest version. So it is there, how do I use it? Restarting brings me back to the command line.
View 1 Replies
View Related
Nov 14, 2010
I didn't do it, it did it on its own, anyway what does it mean?
View 3 Replies
View Related
Jan 19, 2011
A couple weeks ago i installed Ubuntu with Gnome on my Dell inspiron 9400, on a fresh new(empty) hard drive. Went without a hitch and has worked great for a couple weeks. A couple nights ago, i opened the update manager and saw that there were a few recommended updates, i browsed through them, none looked spooky or anything so i installed them all. After rebooting, my computer now does nothing at all. I get to the log in, i type in my password and then after that, all that's there is my background picture. No status bars, no wifi connections. I can right click and get a menu, but there's nothing there of any help, just background settings. i'm trying to figure it out as i go along, finding advice in forums and stuff. but i havent seen this problem anywhere. I installed from a live iso. i'm not sure if i can put it back in and somehow undo whatever happened. I'm at a complete impasse with this.
View 3 Replies
View Related
Jan 24, 2011
When i start up my laptop with ubuntu 10.10 it lets me log in as usual but then takes me to the terminal. i was reading up about stuff on other sites and found i am running on level 2 not sure how i got it there but i dont want to be at that level.
View 9 Replies
View Related
Jun 29, 2011
This is probably more of a VMware problem than an Ubuntu problem, but I am hoping that perhaps someone else running Ubuntu has experienced this and/or has insight.I have a dual-boot system running Win 7 and Ubuntu 11.04 (Both 64-bit).installed VMware Player in Windows 7 and created a virtual machine which should use the partition that Ubuntu is installed on. When I try to run the VM, the "bios" screen goes by and then I get an error message stating that "a virtual cpu has entered the shutdown state." I have tried changing the boot order to boot from cd-rom first and with the ubuntu cd in the drive, the vm will boot from cd and run. Note that I do run VMware Player as an administrator so that it should be allowed to access the hardware directly.
I have tried googling for this and searching VMware communities but pretty much all I find is relative to attempts to install Mac OS X Snow Leopard.Any help would be appreciated.(Note that I have a coworker who has done this successfully and we have compared notes and nothing is popping out as different from a basic configuration standpoint. We do however have different hardware as we are talking Dell Latitude Laptop (him) vs. Lenovo X201 Tablet (Me), both pretty new)
View 2 Replies
View Related
Jul 17, 2011
I installed Ubuntu via USB drive onto my hard drive. If I boot the PC without the usb drive I used, Ubuntu will not load. After booting I can unplug without any consequences.
I looked on the hard drive and there is a boot folder. On the USB drive, this is the tree contents:
/media/disk$ tree
.
|-- adtext.cfg
|-- boot.cat
|-- f10.txt
|-- f1.txt
[Code].....
Am I correct in my assumption that the boot aspect is associated to the USB drive? If so, how do I get it to boot without the USB? I'm guessing copying into some location and modifying grub?
View 1 Replies
View Related
Jan 20, 2010
Preface: I'm a relative neophyte when it comes to Linux anything. I was running Hardy in an attempt to learn. I recently decided to upgrade to Karmic. I liked the look of "Mint 8" (AKA Karmic).I've been running Mint nicely for about a week after a fresh install. Then.... something went spastic...
I went logged in as root and changed file permissions for my "/" folders. The change was simply making group "root" able to read and write files. Than was it. It carried out the change smoothly.
When I hit "Logout" from root, to return to my user account, the screen went white. Stuff flickered when I hit keys. I ended up having to hard boot to get it moving.
Now when I boot, Grub works, it boots to my desktop, graphics display appropriately, but NO mouse and NO keyboard. Dead system. Only thing I can do is hard boot.
I tried the recovery from Grub, no change. I have no idea where to begin. I go back and reinstall it again (3rd time). Sure glad I've kept my old W2K, or I'd be screwed.
PS - I booted the live Hardy CD to look at files. When partitions are mounted no files in "/" or "/home" can be seen.
View 5 Replies
View Related
Aug 11, 2010
basic theme, Docky will not function, no close/min/max buttons, black bakground.Persists even after multiple restarts. Haven't installed or changed anything recently.
View 3 Replies
View Related
Sep 2, 2010
I installed Ubuntu 10.04 via CD and am currently dual booting it with Windows 7. I have a Sony Vaio VPCEA laptop if that matters. After installing Ubuntu, I'm not seeing the GUI when it boots. It will only go to the command line. Worst of all, it's not responding to the "startx" command. That was working last night... not now. Anyway, all I want is the see the GUI on startup. I want to see the splash screen, then the GUI. Very simple. How to do this?
View 9 Replies
View Related
Oct 13, 2010
I just upgraded my desktop to 10.10. All seemed to go fine. The computer then prompted for a reboot, and on rebooting it boots to the shell prompt.
View 6 Replies
View Related
Nov 24, 2010
I've got a desktop 10.04 LTS installation working nicely, and leave it logged in processing things for me. I log in remotely and don't always leave the screen plugged into the computer. Trouble is when I reboot it without the screen plugged in it will sometimes boot to a command prompt.If I turn it off, plug in the screen and turn it on again I get into the GUI as normal. I can't see any settings to change this behavior - what am I missing?
View 1 Replies
View Related
Feb 13, 2011
I have a pretty old computer that doesn't support booting from USB. It boots from CD just fine but I'm trying out a bunch of linux distros on it and I don't like using up all of my CDs. Is there a way to make a cd that will make the computer boot from USB? It's faster and will save me a zillion disks.
View 4 Replies
View Related
Mar 1, 2011
Something plagues my Ubuntu box since I upgraded to Ubuntu 10.10 - I end up with a blank screen while booting. I use an Asus F81SE Notebook, and Dual Boot with Windows XP. Everything worked fine with Ubuntu 10.04.
When I start my notebook after the upgrade to Ubuntu 10.10, I come to Grub, and when I select the latest kernel available, the hard disk LED blinks for a second, turns off ... and nothing happens any more. There is just a blinking text cursor.
As I upgraded from the previous Ubuntu version, there was an older kernel left (2.6.32-26-generic), which boots up fine.
I run 64 Bit on an Intel T4200 CPU. Booting the Live CD brings me to the purple screen with the open source logo at the bottom. I tried 32 Bit and 64 Bit versions of Ubuntu 10.10.
I don't seem to find similar problems on this forum. But does anyone know how to find the mistake?
View 9 Replies
View Related
