When i start up my laptop with ubuntu 10.10 it lets me log in as usual but then takes me to the terminal. i was reading up about stuff on other sites and found i am running on level 2 not sure how i got it there but i dont want to be at that level.
View 9 Repliesso i just got ubuntu so i updated it then installed the wirless card drivers and nvida card drivers i then had to restart so when it re starts it is not at the log in screen like normal it is like in the terminal and then asks me for the log in name so i type it hit enter and then it asks for password so i type it in hit enter and then it says packages can be updated the updates are security up dates then it wants me to type a command in what do i do
View 3 Replies View RelatedI recently upgraded to 11.04, and after messing around with Unity for awhile decided I'd try out Gnome 3.After rebooting to finish the installation, I noticed that the interface had reverted to what my desktop looked like in 10.10, except the color scheme was different. I also got an error message saying my computer's graphics couldn't handle Gnome 3 (I'm on a netbook). Then I went online to look up instructions on how to switch back to Unity (since the option wasn't available on the login screen). After following the first step, which involved entering a command into the terminal, I left the house for awhile.
When I got back, the screen was black with white text (terminal-esque) asking for my username. After typing it in and pressing enter, it asked for my password, and after entering that it became a "terminal". This screen comes up every time I start my computer now, and I have no idea what to do. I could reinstall Ubuntu from a flash drive, but I want to be able to access my files. Is there any way to get around this, or recover my files without taking out the hard drive? As you can probably tell from my post, I'm very new to Ubuntu and Linux, and the mess I'm now in is the result of acting on uneducated impulse.
Heard good things about Lubuntu 11.04 so I downloaded the .iso and burnt a CD to have a peek. When I boot up on the CD and choose "Try Lubuntu" the splash screen shows up then it jumps to command line. I tried startx, but it didn't work.
View 5 Replies View RelatedI bought an imac G3 yesterday and it has xubuntu 6.06 Dapper Drake installed on it. When i turn it on, after it POSTs, a little xubuntu logo appears it it begins to load 'essential drivers' and mount the file system, etc. After it is done doing that, it simply prompts me into a CLI that on the top says "Ubuntu 6.06.1 LTS ubuntu tty1". It asks for my username and password, and then it just keeps me in this tty1 terminal. I did some research online and supposedly by pressing alt+F7 you can exit the tty terminals and go back into GUI mode. Well pressing alt+F7 does nothing, and pressing alt+F1 through 6 just sends me into the different tty terminals.
I am very new to Linux so if someone could give me an idiot proof explanation on either how to fix it or whether im screwed and just need to reinstall xubuntu on here.
I'm not sure what Nvidia driver I installed the other day, but it's messed things up. After Ubuntu boots up and asks for login, I am greeted with terminal. Setting 1152Xwhatever resolution failed. Setting to 1024X768. My xorg.conf.old file is completely empty, so I have no idea what the original settings were. I have tried removing and reinstalling xserver.xorg but that hasn't seemed to get me anywhere. I have also used the "apt-cache search nvidia" command to see what drivers could be installed, but every single driver that I attempt to remove isn't installed.
View 5 Replies View RelatedThis is after months of Mint, which is limited. One problem. It (Deb)boots to the terminal mode. uh... call me stupid, but I have no idea how to get to my desktop. Never needed that command once in my life. I can't find the answer anywhere. Typical. The most basic info is always overlooked. Whats the command line to get to the desktop so I can reconfig this?
View 14 Replies View RelatedSince upgrading ubuntu boots to a prompt rather than logging into gnome. has anyone run into this? what can I do to fix this?
I recently upgraded from Ubuntu 9.10 to Ubuntu 10.4.
does anyone know the command to start gnome from the prompt?
I just installed the only Nvidia driver available in the software center for Ubuntu. I'm running Ubuntu 9.10. I don't know which Nvidia driver I installed, but the screen resolution the Nvidia driver tried to set fails at login, so now I'm stuck booting my computer into the terminal. . I used sudo apt-get install xerver-xorg in attempt to restore the screen; however, the xerver-xorg package cannot be found. How do I restore xerver without reinstalling Ubuntu? How do I restore my original driver?
View 9 Replies View RelatedFinished installing Ubuntu 10.10 in my XPS15, intel i5 4g ram, nvidia GT 420M graphics card,
problem is when i go to additional drivers, the driver listed (Nvidia accelerated graphics) when I install it and reboot it the computer starts on the terminal, no graphic interface. All I get is the black screen asking me login and password, when I enter them, just get the terminal prompt in a black screen.
In a couple days I plan on changing to opensuse from kubuntu. Anyway in the Kpackagemanager I removed the pulseaudio client (and its dependencies) and it messed up my system a bit. I don't really mind but all I need is to get my files from my home folder off my hdd to an external through usb 2.0. When Kubuntu 9.10 boots now all it is is a command terminal basically and I don't know the specific commands to get the files. Or if I need to reinstall something so that it boots up with a graphical looking UI again.
View 14 Replies View Relatedmy desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
How can I edit the system proxy setting using the terminal? Which file contains this settings? I want to edit this automatically using cronjobs, cause from 8-5 I need to use a proxy, but at home I don't need the proxy. How do I fix this?
View 3 Replies View RelatedWhat is the command for "Open a terminal window and run application in this terminal
View 4 Replies View RelatedLinux-goers. I did some research on this, but I am still fairly new to Linux. In Ubuntu 10.10 (Maverick), I accidentally overwrote my "/bin/bash" file. Dude, using "sudo" with a small typo can work disasters. Bash is now broken in the Terminal (gnome-terminal). Terminal itself still works fine, technically, but bash is still hosed/broken. Here is what I did to try to fix it: Booted from Ubuntu 10.10 live CD. Mounted my Ubuntu partition and manually copied the good/fresh "bash" file onto my hard drive. Verified copy was successful. Didn't help, as you see. Reinstalled "gnome-terminal" using synaptic package manager. Tried to reinstall bash via synaptic, it failed with error, "E: /var/cache/apt/archives/bash_4.1-2ubuntu4_i386.deb: subprocess new pre-removal script returned error exit status 2"
In Terminal, all basic commands work as far as I can tell. ("ls", "pwd", navigation, etc.) Here are some problems:My "username@computername" does not display in the prompt; only the $ sign. Bash keyboard shortcuts such as uparrow and tab do not work. Instead, each inserts a key code. I can't even move the cursor left/right. Aliases (a function of bash and .bashrc) are broken, of course. My sanity level decreases when I use Terminal now. For what it's worth, even with "sudo" I get a "permission denied" error when trying to run Google Chrome! I read something about a ".bashrc" file being a possible problem, but I don't know how to make it work, or the file's proper locations in Ubuntu 10.10. Is there something I can do with a "make" or "apt-get install" command or something?? Could this simply be a permissions problem? Is the link to "/bin/bash", "/bin/sh", or a ".bashrc" file broken? Guide me, oh Linux gurus.
P.S. I always wondered what exactly bash was and how it was different from the basic terminal. LoL, this is an excellent way to demonstrate the difference, and I WANT IT BACK!
I'm using 10.04, and gnome-terminal GNOME Terminal 2.30.2 . I have irssi running on screen session on remote host. And I've been struggling for quite many days to configure it to produce either visual feedback or ring terminal's bell when I receive a private message or one of those that are highlighted.
My compiz settings window in General tab has 'Audible bell' checked.
My GNOME terminal has 'Terminal bell' checked.
I also added 'set bell-style audible' to my ~/.inputrc
And I also tried to manually load pcspkr module into my kernel.
No of the above helped or at least I haven't been able to notice any difference.
I also used some commands for irssi to produce bell sign.
I've fallen in love with Terminator as a replacement for the standard gnome-terminal app.
However, I'm also very much in the habit of using the nautilus-open-terminal extension for launching new terminal sessions.
I'd like nautilus-open-terminal to launch Terminator rather than gnome-terminal.
A quick search of my system and the web didn't reveal anything. i didn't find a gconf setting to control this. A quick look at the source code didn't help much either.
I'd like to run a program [URL] from the GUI menu (yes, I know I can run it from the command line). I've gotten this to work by using a menu entry (see attached screenshot).The command is:
Code:
gksu chkrootkit
with the option for Type: was selected as Application in Terminal However, when chkrootkit is finished, the terminal immediately snaps shut according to the profile selection: When Commands Exits: Close terminal What I'd like to do is create another profile that causes the terminal to be held open (see screenshot) when the command exits and be able to choose that profile from the GUI Menu entry. I believe the command when using the CLI is:
Code:
gnome-terminal --profile=<profile_name>
how do I incorporate this within the Command entry line of the launcher?
i started using computer when it was all dos driven so thought i was going to be fine using the terminal in ubuntu the problem i am facing is i can not quite get my head round why is it if i load the terminal. and the first this i type is dir or ls it gives me a list off directories. So why is it if i type cd /pictures i get no such file or directory ? Confused
This also bugging the jebus out off me is i am trying to get into my usb pen drive from the terminal to run a program i have on there.
so i type cd /media
then typed ls
is displayed New Volume <-- This being the name off my pen drive
i have tried every this to get into there but the commands i would use in dos are not playing ball.
Can some one please explain how to get into my usb pen then tell me were i can go read on this as i really can not get my head around this at moment.
what is the difference between Byobu Terminal and Terminal? i ask this because when i upgraded from ubuntu 10.10 to 11.4 i did not have Byobu Terminal
View 2 Replies View RelatedWhen I upgraded to Ubuntu 11.04 Natty Narwhal, the Byobu terminal was installed. What are the differences between the Byobu terminal and the default terminal(I mean the terminal that is default in 10.10)? Is it more advantageous to use Byobu?
View 2 Replies View RelatedFor some reason bash is acting really really weird. When I use my gui terminal, and I tryto use tab completion, it freezes up the terminal, and I can't edit the line at all unless I do a ctrl+c.and when I try to do tab completion in text only mode it prints out : "Error: Can't open display: (null)"again and again and again, and I have to do a ctrl+c, also in text only mode it will randomly log me out. I have tried checking for blown caps, but there weren't any, and all the other programs work fine except for the command line. I am using bash version: 4.1.5(1)-releaseand gnome-terminal version: 2.30.2
View 5 Replies View RelatedI just upgraded from ubuntu 10.04 to 10.10 with update manager; now looking through the forums it appears that's not as good as just reinstalling. Upon restart i found myself in a full-screen command line, and I can't get to the familiar GUI.I entered sudo apt-get install ubuntu-desktop and the response was that the desktop is the newest version. So it is there, how do I use it? Restarting brings me back to the command line.
View 1 Replies View RelatedThe left hinge on my Dell Inspiron 1521 cracked and broke. Last night, I removed the hinge since it had frozen in an "up" position. I had to remove the hinge plate to do so. Since then, I am unable to boot my computer. Whenever I boot up, I see the Dell Boot Screen (like normal) and then the screen goes blank except for a the words GRUB at the top of the screen. I've tried using the Live Disk to recover, but I don't have a "Recover" option on the set up menu and prior to installing, the set up client advises that there is no operating system installed and that I have only one partition.
View 2 Replies View RelatedI didn't do it, it did it on its own, anyway what does it mean?
View 3 Replies View RelatedA couple weeks ago i installed Ubuntu with Gnome on my Dell inspiron 9400, on a fresh new(empty) hard drive. Went without a hitch and has worked great for a couple weeks. A couple nights ago, i opened the update manager and saw that there were a few recommended updates, i browsed through them, none looked spooky or anything so i installed them all. After rebooting, my computer now does nothing at all. I get to the log in, i type in my password and then after that, all that's there is my background picture. No status bars, no wifi connections. I can right click and get a menu, but there's nothing there of any help, just background settings. i'm trying to figure it out as i go along, finding advice in forums and stuff. but i havent seen this problem anywhere. I installed from a live iso. i'm not sure if i can put it back in and somehow undo whatever happened. I'm at a complete impasse with this.
View 3 Replies View RelatedThis is probably more of a VMware problem than an Ubuntu problem, but I am hoping that perhaps someone else running Ubuntu has experienced this and/or has insight.I have a dual-boot system running Win 7 and Ubuntu 11.04 (Both 64-bit).installed VMware Player in Windows 7 and created a virtual machine which should use the partition that Ubuntu is installed on. When I try to run the VM, the "bios" screen goes by and then I get an error message stating that "a virtual cpu has entered the shutdown state." I have tried changing the boot order to boot from cd-rom first and with the ubuntu cd in the drive, the vm will boot from cd and run. Note that I do run VMware Player as an administrator so that it should be allowed to access the hardware directly.
I have tried googling for this and searching VMware communities but pretty much all I find is relative to attempts to install Mac OS X Snow Leopard.Any help would be appreciated.(Note that I have a coworker who has done this successfully and we have compared notes and nothing is popping out as different from a basic configuration standpoint. We do however have different hardware as we are talking Dell Latitude Laptop (him) vs. Lenovo X201 Tablet (Me), both pretty new)
I mainly use debian jessie , recently i have installed daragora as my second os to get a feel of gnu/linux . the problem is that dragora uses bash , and it's commands are different from debian jessie terminal is there a way that i can use the same commands here in dragora?
View 4 Replies View Relatedgnome-terminal from the Debian squeeze does not use the 'default_size_columns' and 'default_size_rows' from the /apps/gnome-terminal/profiles/Default/ folder of gconf.
View 6 Replies View RelatedRecently I've updated from 13 to 14. However, after updated I've tried to work with my terminal and it seems doesn't works fine. I can read 'starting terminal' but after that it's closed.I've uninstalled and re-installed it through the graphical tools (gnome-terminal) but that doesn't works fine.
View 3 Replies View Related