I use Ubuntu 9.10 after upgrade from 9.04. But my NVIDIA not detect my TV. Here i can not choose other option than "Separate X screen. [URL].. I try to uninstall NVIDIA driver and install again, but no efekt. Last i install driver 190.53 manual. Try to change my xorg.conf with other options, but without result! Now my xorg.conf is reset and loks like:
[Code]...
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
upgraded to ubuntu 10.10. now my monitor is not detected by the OS. tried pressing the detect monitors button but it does nothing and cannot change resolution(1024x768(4:3) or the refresh rate(currently at 0)?in 10.04, the monitor was called "dell 15"".
View 6 Replies View RelatedI recently installed the 64bit version of 10.10 onto my machine, which runs on an Intel DP55WB motherboard. The on board NIC is not detected and I cannot get it to connect to a local wired connection. I ran sudo lshw and it returned (among other items)
Code:
*-network UNCLAIMED
description: Ethernet controller
product: 82578DC Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm msi cap_list
configuration: latency=0
resources: memory:e0200000-e021ffff memory:e0224000-e0224fff ioport:2020(size=32)
How to get 10.10 to recognize the NIC?
I can't access my USB devices via Computer, yet I can generate a list with:
Code:
lsusb
Output:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0a48:5014 I/O Interconnect Mass Storage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Ok i have these speakers that are really nice, but Ubuntu only allows me to use them every once and a while, like 4/5 days of the week. If i plug the speakers in and turn the volume up i cant hear anything, but if i take the speakers out and plug my Zune into them i can hear the music. How do i fix this?
View 4 Replies View Relatedi moved on ubuntu 9.10 Karmic, before on 9.04 All sensors work fine but now only "coretemp".so ran "sudo sensors-detect" and output result is:
Code:
#----cut here----
# Chip drivers
[code]....
I could not connect to any wireless network on my laptop with ubuntu 9.10. Network manager detects all wireless networks avaliable, but could not connect to any of them. When I try to connect, system asks for wpa-key, but typing it gives no result. I tried home and office network, but it is the same. There is WinXP installed on the other disc partition and no problem with wireless connection at all.
I have Acer 3680 with broadcom wireless adapter 4318 (driver was installed via ndiswrapper). I've already spent hours, browsing the Internet, but it does not help unfortunately, so I'll appreciate any advice of experienced user.
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:"SvoyDom"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1E:8C:E5:12:BE
Bit Rate=54 Mb/s Tx-Power:25 dBm
[Code]...
As the Title states, "update-grub" does not detect the windows xp partition on /media/sda1. And, when I attempt to mount it from teminal nothing happens, and from nautilus I receive the following error: "Error mounting: mount exited with exit code 2:
mount: only root can mount /dev/sda1 on /media/sda1" I am root.
I'd like to have a dual-boot system with WIN7 and Ubuntu. I already have Windows 7 installed. I tried the 9.10 installation but the partitioner says i don't have any Operating Systems installed. I read a few threads about this type of issue and i didn't find any solution. Then i found a discussion saying that there is a problem with GRUB2 in 9.10 and that the problem is not present in 9.04. Then i tried the installation with 9.04 but got exactly the same problem: the partitioner does not detect Windows 7. Basically i have this system:
- Windows 7 Professional x64
- 1 TB HDD with 4 partitions with 100Gb each (NTFS)
- ~600 GB unpartitioned free space
- Processor Intel Core 2 Quad Q8200
- ASUS P5Q MOBO
- ATI Radeon HD 4550
I tried both the x32 (i386) and x64 (AMD) versions of 9.10 and the x64 version of 9.04. I don't have the WIN7 partition that some installations seem to have, at least i don't see it under Disk Management (Computer Management).
I recently downloaded ubuntu 9.10. I have a dell d410 with a built in wireless card. It won't detect it, and I have no access to a wired connection for now.
View 6 Replies View RelatedI have a dual boot windows xp/ubuntu64 9.04 rig at home. Ubuntu is installed alongside windows(if i worded that correctly?). well last night i got the infamous error #15. so i popped in the live cd and messed around with grub. well i changed grubs boot to point to h0,5 which is where ubuntu resides and as you can guess i can not boot. i want to change it back to h0,0 or h0,1 however the hard drive is undetected.
I tried windows repair console but same thing cannot detect the drive. I pulled the drive out slipped it in my other machine and still same thing. so my question is how can i go about editing the grub menu.lst if i can't mount the drive?
Maybe i can just install a new grub/mbr? but i cant figure out hot to mount the drive.
How do I access a flash drive? I am using Ubuntu 9.10. I would think plugging it in would auto detect but that does not happen. I have tried several different flash drives. I stick them into a USB slot and nothing. I went into Places.Computer and Places.Home Folder. It's not showing there either. I tried several different USB ports. It appears Ubuntu can't detect USB flash drives.
View 7 Replies View RelatedI have a Toshiba Gigabeat F60 that I can't get to detect with Rhythmbox. I have libmtp and mtp-detect installed and the plugin 'Portable Players - MTP' is enable in Rhythmbox. Using mtp-detect gives this error;
Code:
libmtp version: 1.0.2
Listing raw device(s)
Device 0 (VID=0930 and PID=0009) is a Toshiba Gigabeat MEGF-40.
[code]....
I'm currently using 10.04, but the issues was in 9.10 as well, I updated thinking It may fix something.
I am trying to do a fresh install on the HDD that had 9.10, a 80GB ext4 drive. All that shows up is my other HDD, a 160 GB ext3 drive. Why is this happening? "ls /dev/|grep sd" only returns sda and sda1. My 80GB drive has a few partitions, one for swap for instance.
Edit for clarification:
2 harddrives in 9.10:
80 GB HDD /dev/sda
1 ext4 partition that has ubuntu installed (/dev/sda1)
1 extended partition (/dev/sda2) for swap (/dev/sda5)
160 GB HDD /dev/sdb
1 ext3 partition /dev/sdb1
Only the 160GB HDD is detected when using the liveCD (as /dev/sda and /dev/sda1). I can mount it just fine, but my 80GB HDD is not detected. After ejecting, I can boot my 80GB HDD just fine...
booting 4m external it goes into rescue mode saying uknown partitionwen i boo 4m computer grub it says no such device.Cannot even browse via grub command line. Says unknown partition.Posting via mobile
View 4 Replies View RelatedI recently downloaded Ubuntu 10.04 into my Windows Vista laptop & I have downloaded the one that can run alongside my current system, so I'm running dual OS. At the start up screen where I choose the OS, I choose Ubuntu & it loads fine. Everything looks perfect except that it won't connect to or detect any wireless connections. I have tried clicking the Network Manager icon & clicking New Connection. I typed in the SSID & security key for my wireless connection/router & after I hit create, a small window pops up saying "Wireless Disconnected: you are now working offline" or something like that. Nothing happens/changes. There is no internet connection on Ubuntu OS. But when I switch over to my Vista OS, the internet works perfectly (obviously.)
View 1 Replies View RelatedI've searched quite a bit and cannot find a solution to why using update-grub cannot detect my windows 7 partition Here is a log of the bootinfo script(hopefully it pastes correctly...)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
[code].....
I have a Toshiba L650 18-C. I've just installed Ubuntu 10.10 without problems. I've made the update and everything was working just fine until i discovered that my headphone exit does not produce any sound: When i connect external speakers or headphones the ubuntu keeps playing music on his netbook speakers...How can i solve this problem? Is it possible that Ubuntu did not install the drivers of that Sound Output?I appreciate your answers because this problem is a little bit 'annoying'
View 4 Replies View RelatedI have Mint 9 installed on a 120GB, WD SATA HDD. Now I want to install Ubuntu 10.10 on this HDD. Downloaded i386 desktop image and created a bootable USB stick with the image. System boots fine but installer do not detect My HDD. It only lists my USB drive. Even Gparted donot detect the drive. Typing sudo fdisk -l also lists only my USB Drive.
View 3 Replies View Relatednot connect to hotspot via wireless..i was check via console terminal "ifconfig wlan1 up" but not display message.. i have used network tool via gui but i don't know how to setting this wireless.. iam using ubuntu 10.04and my netbook specification is:
Cipset : Intel
Prosesor : Intel atom 1.66 GHz, 667Mhs FSB Cache 512 KB
Hardisk : WDC 250 GB
[code]...
I have run into a problem with a existing workstation I can't seem to figure out. My configuration:Ubuntu 10.10 64 ASUS M2N68-AM Plus MB w/ Nvidia Geforce 7025 graphics.Has been running for almost exactly one year beautifully. System suddenly froze. When I rebooted, system stopped with message saying it could not detect graphics or KB or mouse. I suspected hardware failure but when I booted from live CD, It ran fine. I then ran e2fsck -c and found no bad blocks but 1 messed up inode which it fixed.
I assume at this point the only problem is some lost configuration on video. I first tried apt-get nvidia drivers. this got rid of the message but now X will not start because of "no valid modes". Tried running nvidia-xconfig but it exits without changing anything.All user files seem to be OK. I'm not going to have to nuke this thing just to restore X am I?
Ubuntu installer does not detect my sata drive during installation.
Hardware:
Asus p4gv-mx
4gb ram
250gb wd sataII drive
ide cdrom
Bios options tried:
Disabling apci 2.0
disabling apci
setting IDE mode to
[Enhanced]
[compatibility] w/both sata only, pata& sata settings
Setting my pata cdrom to slave and plugging it into the slave position of the ide ribbon.
I've tried these combinations with the usb installer, and dvd installer.
I've tried loading the live cd/dvd & usb then running the installer with in.
I've tried the spacebar method, hitting f6 and apci=no, noapci
The live cd has no problems detecting and mounting my hdd, however the installer does not detect it.
How can i detect if my disk is formatted as gpt or mbr?I suppose in principle this could be done by somehow reading a few bytes (no more than say 10K) from the beginning and possibly the end of the disk? But there surely is a program around that does exactly this, maybe some variation of or argument to fdisk or grub?
View 4 Replies View RelatedI've just fully installed Ubuntu on my laptop. I had it running as a secondary operating system and have switched over. Now, however, I'm having all sorts of incredibly frustrating problems, one of which being that it won't detect the wireless networks around me!
how I can get the network manager to automatically detect wireless networks in range, this whole process has become very frustrating.
I have hp q 610 ubuntu 10.10 can't detecte wirless whatshould i do?
View 2 Replies View RelatedIs there a way to check if the current installation was done through wubi?e.g. something like "lsb_release -a" command that would show that the installation was done through wubiPerhaps the "/host" mounted directory?
View 2 Replies View Relatedwhat will i do? so that i can install ubuntu on that partition?
View 2 Replies View Related