Installed today on a toshiba satellite. Everything works great but it randomly takes me to a black screen. Sometimes looping music playing in the background sometimes just freezing all together. I dont know what error logs to post and there isnt anything specific going on everytime it does this. Music isnt always playing , once I was even logging out.It has happened with and without unity.
View 3 Replies
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
I have an old PC in my basement that I decided to load Ubuntu onto a few months ago. I ran version 9 for a while and then recently upgraded to10.04.Unfortunately, I've been having issues with intermittent system crashes using both versions. Sometimes the computer will work fine for hours and other times it will crash 20 seconds after startup. I'll be able to provide much more information tonight when I get home but for now I wanted to plant the seed in the forum and see if anyone has any ideas.The computer will be working fine and then all of a sudden the screen will go black and then start blinking, switching between a blank screen and a blank screen with a bunch of tiny white squares/lines. When I restart, things seem okay again.
View 6 Replies View RelatedI upgraded 10.04 to 10.10 (32bit), the upgrade process didn't go that well because first it didn't boot beyond GRUB. Solved this by unplugging my keyboard (my ubuntu is a server machine without keyboard or mouse, I like to use the desktop version through vnc). After that is booted to shell, which was not so nice either. This time it was the legendary nouveau driver which sorry for my language I will never install again (caused major problem twice already). Installed nvidia drivers and got a display for X this time and it booted nicely to login screen.
My problems have arised since the upgrade, the system will randomly "crash" and go straight to login screen, ending my current session. Sometimes my mouse cursor even changes to the X-mark. I can't see anything in gdm, x11, syslog etc. that would explain the crash. So far I've found best log from .xsession-errors which is here:
[Code]...
I got a lot IPv6 errors on the same log too, but those were caused by utorrent+too old wine. Didn't remember that upgrade deletes/disables extra-repos and I was running the stable wine (1.2.1) instead of the latest one (1.3.7). Upgrading wine solved the error from utorrent IPv6 connections.
So any ideas what I could do to fix these crashes? I'm not so much into clean re-install because of all the configuration I'll need to do then. I do have home on a separate partition but there's lots of software to install and configure.
When I opened Banshee today and tried to play a certain song, the player crashed. When I opened the player again, it continued to crash for only the same songs.
Here's the output:
Code:
[Info 11:19:22.275] Running Banshee 1.8.0: [Ubuntu 10.10 (linux-gnu, i686) @ 2010-11-26 13:53:04 UTC]
[Info 11:19:22.620] Starting collection of anonymous usage data
[Info 11:19:23.353] Updating web proxy from GConf
[Info 11:19:23.397] All services are started 0.900266
[Warn 11:19:23.553] Forcefully breaking out of RCS loop b/c change in total_width less than 1.0
[Info 11:19:24.110] nereid Client Started
[Warn 11:19:24.252] Caught an exception - System.ArgumentNullException: Argument cannot be null .....
Native stacktrace:
banshee-1() [0x80d4d0b]
banshee-1() [0x810ffeb]
[0xb789140c]
Debug info from gdb:
Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf
ptrace: Operation not permitted.
Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application.
Aborted
I temporarily fixed this by disabling all extensions, reenabling them, then restarting Banshee, but the problem came back a few minutes later.
I have Iceweasel 38.6.0 on Jessie 8.3, and it seems to crash more or less randomly. It just suddenly disappears, and when restarted, it gives that "embarrasing"- thing. The pages reopen fine and it may take a day between crashes, or about an hour.
Where should I look for the reason of the crashing? Is there a log file or something somewhere?
My machine is old StinkBad T400. I'm using Cinnamon.
I managed to actually get Xubuntu to install, the previous time!Here is what happened. Installation went smooth. Restart.Log on, start Firefox, close it, wait a few seconds, crash.Restarted, it's now in a higher res. Ok, used an xterm to install LXDE. Reboot.Log into LXDE, play around, crash.Restart, repeat, use Firefox, after a while of browsing, crash.The mouse still responds to movement though....The person this was intended for uninstalled it afterwards. (it was with Wubi) I'd like to fix this.
View 6 Replies View RelatedFirefox crashes randomly. Frequency: few minutes to hours. It is not website-specific. Happens on both flash and non-flash sites. Seems to happen more often when I'm doing something complicated, like editing a photo album on facebook,or using a javascript-heavy page. Safe mode does not help.It used to work perfectly. I don't remember when the crashes began, possibly a month or two ago... So I don't know if they are caused by an update or by something I installed.
Most solutions I found were for problems with the Firebug extension (which I don' have) or for problems with fullscreen flash (which is not the case).Firefox 3.6.8, fully updated Lucid 64bit When started from terminal, it sometimes outputs an exception at startup, then nothing, then "Killed" before crashing. As below:
Code:
[Exception... "Component returned failure code: 0x80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIXPCComponents_Utils.import]" nsresult: "0x80520012 (NS_ERROR_FILE_NOT_FOUND)" location: "JS frame :: file:///home/viktor/.mozilla/firefox/y4yoxvhi.default/extensions
[code]....
My supposedly stable system was crashing. The problem was one or more specific screensavers--xscreensaver, the display manager (lightDM), and X itself are innocent as far as I can tell.
I'm on a Thinkpad T400 with Debian Jessie (8.4)/MATE/lightDM. I have libreboot and not proprietary BIOS. I like variety, so in addition to installing xscreensaver itself (the unofficial patched jessie version without the "out of date" nag, which I got from https://angband.pl/debian/pool/main/x/xscreensaver/), I also installed some extras from the official repository (xscreensaver-gl-extra, xscreensaver-data-extra, xscreensaver-screensaver-bsod). I enabled all the installed screensavers and asked xscreensaver to randomly cycle through them.
To my dismay, after variable lengths of time (usually within 20-60 minutes), when a random screensaver has been on for a little while (I'm guessing as it's about to go to the next random one), X crashes to a black screen. The only way to make the black screen go away is to kill X (which I mapped to Control + Alt + Backspace) then log back in. There are no useful logs anywhere except some cryptic IO error 11 entry in ~/.xsessionerros.
Now for the troubleshooting:
1) First I tried installing a more up-to-date version of xscreensaver (5.34-2), which I grabbed from the sid repository. This didn't work--same problem as described above. Therefore, I went back to the patched version for jessie (5.30-1 from angband.pl).
2) To exclude that the lightDM middleman was the problem, I disabled it and was logging in with startx. Problem did not go away. (I then rigged systemd to log me in automatically and for startx to run automatically once I'm logged in--who needs middlemen?)
3) To exclude screensavers butting heads, I uninstalled mate-screensaver and disabled anything from X that could be interfering (by running these commands in a startup script: xset -dpms; xset s 0 0; xset s noblank; xset s off). Problem did not go away. I kept this startup script nevertheless.
4) Finally, to exclude individual xscreensaver module(s) being the problem, I unchecked them all. Then I wrote down the names of my 20 favorite modules (which include some from gl-extra, some from data-extra, and bsod) and tested them in small batches, running xscreensaver with only 5 favorites checked at a time. After testing four batches of 5 and witnessing all 20 favorites both display and load without any X crashes, I went ahead and selected all 20 favorites. I left the laptop on overnight and in the morning (about 12 hours later) it's still going strong.
One or more particular xscreensaver modules are crashing X, probably at the time they are being loaded to be the next one to show. I think I already spent enough time on this, so don't really care to identify +/- troubleshoot the offending modules.
I've upgraded from stable to testing.In stable, iceweasel performed flawlessly as I expected. Now it crashes at random times at an alarming rate.It does seem that I can recreate the crash to an extent on ....., where crashes are the most prevalent.I haven't located any bug reports regarding this issue with wheezy iceweasel.
View 14 Replies View RelatedMy network crashes randomly under regular traffic and more rapidly under high traffic (i.e. running Transmission) and I have to reboot to get it to start working again.
About system:
Toshiba Satellite A105-S2021
512MB RAM
BIOS V2.30 (Latest)
Ubuntu 10.04LTS (Fresh install, not an upgrade) (Only OS on this machine)
2.6.32-27-generic #49-Ubuntu SMP
[Code]....
I'm running ubuntu 10.10 and firefox crashes randomly. I t doesn't appear to be connetcted to flash or anything in particular. I attached a screenshot of the crash report abd here is what it said when I clicked the details button:
Add-ons: langpack-en-AU@firefox-3.6.ubuntu.co... pushnote.com:0.6.18,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.13
BuildID: 20101206121845
[code]...
I am using samba to share some folders from a Ubuntu server (10.04) onto Windows XP. This works fine, but once in a while (once/twice a day), samba crashes and leaves a dead.letter in the folder I was accessing. Here are mode details:
lsb_release -a
Code:
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.04.1 LTS
[Code]...
I've got the latest version of Flash installed,and it works most of the time,t occasionally a video or game will stop working and the area it was in will just turn into a grey box. Usually it only does this if I leave the page the video's on, but it keeps doing it when I'm playing Robot Unicorn Attack on Adult Swim's site, too
View 14 Replies View RelatedI just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies View RelatedAfter a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
I'm running Win XP 64 bit and ubuntu 9.10 as a dual boot. I also have the CD for Ubuntu 10.04. My question is, I want to do a fresh install and would prefer it to install over 9.10. Is this what will happen or will it want to install as a 3 way boot??
View 2 Replies View RelatedI installed ubuntu some weeks ago, then had to install compiz and other stuff like nvidia-current myself...now when i do a fresh install, it's there which means some files are saved.. how do i stop that, and make a 100% fresh install?
View 3 Replies View RelatedI just performed my first (successful?) Ubuntu installation. The installation process seemed to go fine, and I selected "Ubuntu Desktop" when asked which set of packages I wanted to install. I assumed this was a standard choice.
After the installation finished, the system rebooted and brought me to a login prompt.I'll mention at this point that I have SOME prior experience with Linux systems, but I'm by no means an expert, and I'm new to Ubuntu. I logged in and tried startx, only to be informed that it was not installed. Having performed a network install, I have internet access on the machine, so I tried "sudo apt-get install xinit" which seemed to work, but now when I run startx, my window shrinks to a portion of my monitor size, the colours invert (black prompt on a white background) and the system locks up. I'm assuming this is some sort of video driver issue, and could probably explore further, but I figured I'd ask some experts first.
Every times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies View RelatedI just installed ubuntu 9.10 on my computer and it just freezes without me doing anything.If i open my computer and leave it like that it will freeze after 5 mins or so.
View 8 Replies View RelatedI upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.
I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better
I messed up an install of Ubuntu (tis all part of the learning process) and I was wondering if I could install a fresh copy over the top of the old one?Would it remove everything like themes, programs and drivers and stuff?
View 9 Replies View RelatedI have just installed Kubuntu 10.04, but can't login into it. I enter correct user/pass, then it tries to go into KDE, but suddenly drop back to login window.The same situation with failsafeX.A olso tried different users and several times reinstalled Kubuntu.
Here is my "~/.xsession-errors"
Xsession: X session started for metrofun at Wed Jun 30 20:04:22 EEST 2010
konsole(1091)/kdeui (kdelibs): Attempt to use QAction "change-profile" with KXMLGUIFactory!
x-terminal-emulator: ../../src/xcb_io.c:385: _XAllocID: Assertion `ret !=
[Code]....
I just installed Ubuntu 10.04.1 LTS i386 on my desktop after not having it on there for while then decided to do a clean install on my laptop, which had 10.04, but I had screwed a few things up on it... (and a fresh install is always nice
Anyway, no big deal, just kinda weird: Whenever I google something that I had just googled before on my desktop (ie, a program or something that I had installed, and wanted to install on my laptop also), the link for the result is purple, as if I had already visited that link. But I know I haven't because this is a completely fresh install, I reformatted and everything. The only thing I can think of is that somehow the history/clicked links got transferred to the live CD from my desktop, as I used the same disc for both installs, but this seems a bit improbable imo.
EDIT: I just realized that I did NOT use the same disc for both installs, I couldn't find the original so I burned the .iso onto another one for my laptop install....
I have a >5 year old laptop, running Maverick (Ubuntu 10.10) but I need to do a clean install since the video driver is all screwed. The laptop is without USB boot option in BIOS. The CD drive is physically removed.
The HD partitions are
/dev/sda1 (ext4) 15gb mounted as /
/dev/sda2 (extended)
/dev/sda5 (linux-swap) 2gb
/deb/sda6 (ext4) 20gb mounted as /home
How can I do a fresh install??
after the install with kde selected i get a command line however typing startx tells me no startx installed, startkde says "$DISPLAY is not set or cannot connect to the X server."
hwinfo --gfxcard says
Hardware Class: graphics card
Model: "Trident Microsystems 9910"
Vendor: pci 0x1023 "Trident Microsystems Inc."
Device: pci 0x9910 "9910"
SubVendor: pci 0x1179 "Toshiba America Info Systems"
SubDevice: pci 0x0001
Revision: 0x63
laptop is a tecra 8200 and the graphics card is actually "Trident Microsystems CyberBlade XP" not sure of that is the problem or what to do about the whole thing
