Ubuntu :: 11.04 64bit Firefox Crashes On Startup In Unity
May 3, 2011
I upgraded from Ubuntu 10.10 64bit to 11.04 64bit. When trying to launch Firefox from any area (launcher, menu and terminal) It crashes the moment it tries to start. This only happens in the new Unity UI. Switching back to Ubuntu Classic, Firefox runs just fine. Here is the message I get when starting Firefox from the terminal:
(firefox-bin:458: LIBDBUSMENU-GTK-CRITICAL **: dbusmenu_menuitem_property_set_shortcut: assertion `gtk_accelerator_valid(key, modifier)' failed
View 2 Replies
ADVERTISEMENT
May 12, 2011
I have upgraded from Ubuntu 10.10 64bit to 11.04 64bit. When trying to launch Firefox 4 it crashes the moment it tries to start.Here is the message I get when starting Firefox from the terminal:
Quote:
(firefox-bin:11649): LIBDBUSMENU-GTK-CRITICAL **: dbusmenu_menuitem_property_set_shortcut: assertion `gtk_accelerator_valid(key, modifier)' failed
*** NSPlugin Viewer *** WARNING: unhandled variable 18 (<unknown variable>) in NPN_GetValue()
ubuntu@arsubuntu-Aspire:~$ *** NSPlugin Viewer *** ERROR: NPN_InvalidateRect() invoke: Conex�o fechada pela outra ponta
View 3 Replies
View Related
Aug 15, 2009
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
View 4 Replies
View Related
Jan 9, 2010
I recently upgraded (via Ubuntuzilla) to firefox 3.5.7 and now, every single time I close Firefox, the program seems to crash without quitting completely.
First, I receive an error saying that the program will not close and asks me if I want to Force Quite or Wait for it to close on its own. This has been happening ever since I upgraded to Karmic and if I just wait it usually quits fully after a couple seconds.
Now what happens is this: the window still closes, but if I try to reopen Firefox then I get this error stating that Firefox is already open and therefore cannot be opened again. The only way to get back into Firefox is to restart the entire computer. (Incidentally, this is the same problem that occurs whenever I try to Force Quit Firefox)
This now happens every single time I "close" Firefox.
Does anyone know the source of this error? Or a workaround?
View 4 Replies
View Related
Jan 14, 2011
I have installed dwm as window manager and whenever I start firefox it crashes after a few seconds. When I use the gnome window manager everything works fine.Anyone has a hint for me what I can do?
View 3 Replies
View Related
May 20, 2011
I have installed dwm as window manager and whenever I start firefox it crashes after a few seconds. When I use the gnome window manager everything works fine.
View 5 Replies
View Related
Jan 11, 2011
Its a lot easier to just post a screenshot than to describe whats going on. View attached screenshot. Notice how there are random graphical glitches in the title bar and behind some of the icons in the dock.
I am using the free ati drivers and my gpu
lspci|grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series]
The pc is a gateway laptop.
I have tried fglrx but there are even more problems such as a extreme mouse and keyboard lag...among other issues.
On a related note, I am often logging out then back in because restarting unity seems to fix the glitches although they eventually return. Is there any program that gives the option of reloading unity, like the compiz fuzion icon? Or some commands in terminal that will do the same thing?
View 1 Replies
View Related
Jun 21, 2011
I recently recovered Unity after purging the Gnome3 PPA and running a dist upgrade again back to Unity. My problem now is that when I boot into Unity, all I get is the desktop, background and a cursor. I can click on and launch any apps that happen to be on the desktop, but I can't see the unity launch bar, or the action menu, or the top panel - which leads me to believe Unity isn't actually launching. The theory is further supported by the fact that if I launch Unity manually in a terminal ("unity") - it launches, after a brief loading period, and works perfectly. How can I make this happen automatically again?
View 3 Replies
View Related
Jun 14, 2010
Ktorrent crashes on start (64bit). After update.
View 11 Replies
View Related
Apr 28, 2011
I have installed (twice) slackware 13.37 64 bit on a virtual machine (vmware workstation 7). But when i try to startx the kde window starts to load and the harddrive on the kde startscreen shows and then it crashes. Anybody that running slackware 13.37 on a virtual machine?
View 10 Replies
View Related
May 1, 2010
I tried installing Gwibber on Ubuntu 9.10, but when I start the program, it just goes grey and requires a force-quit.Running it in the terminal produced the following errors.
Code:
/usr/lib/python2.6/dist-packages/gwibber/microblog/support/facelib.py:47: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[code]....
View 1 Replies
View Related
Oct 10, 2010
DISCLAIMER: I know I should go to the gparted forums for this question. I'm at the ubuntu forums though because I think the reason is that Ubuntu is somehow conflicting with my BackTrack linux installation; it worked fine before I installed it.Reinstalling did nothing. Trying to run from Terminal gives:
Code:
matt@Matt:~$ gparted
Inhibit all polling failed: Only uid 0 is authorized to inhibit the daemon
[code]....
View 2 Replies
View Related
Dec 6, 2010
I install Banshee 1.8 on Kubuntu 10.04 from a PPA but it will not start up now I've ran it from a terminal and this is the output
Code:
[Info 14:04:45.208] Running Banshee 1.8.0: [Ubuntu 10.04.1 LTS (linux-gnu, i486) @ 2010-09-30 23:38:39 UTC]
[Info 14:04:46.711] Starting collection of anonymous usage data
[Code].....
View 1 Replies
View Related
Dec 18, 2009
yumex crashes after checking repositories:
Code:
running
Current Settings
autorefresh: True
branding_title: 'Yum Extender NextGen'
[Code].....
View 7 Replies
View Related
Jan 18, 2010
I have used a few versions of ubuntu now and each one seems to encounter the same problem loading ubuntu.
I am using a Samsung x05 laptop.
If I have a mouse, printer or even wired internet connection plugged in at any point during startup I will not be able to get past the login screen. I can login fine but the system freezes at the beige screen before the desktop appears.
I recently partitioned and installed Windows xp, which doesn't have the same problem, so I presume it is some kind of incompatibility between Ubuntu and my laptop?
View 2 Replies
View Related
Jan 28, 2010
I am using Ubuntu 9.10 and having trouble with Amarok. It crashes on on startup. I have read that the issue is not with Amarok but rather phonon. Is there a solution? Application: Amarok (amarok), signal: Segmentation fault [Current thread is 1 (Thread 0xb68cb950 (LWP 13047))]
Thread 5 (Thread 0xb527bb70 (LWP 13054)):
#0 0x003e9422 in __kernel_vsyscall ()
#1 0x07fcb142 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0
#2 0x037168d4 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6
#3 0x075519ff in ?? () from /usr/lib/libxine.so.1
[Code]...
View 2 Replies
View Related
Apr 13, 2010
Whenever I try to start up using a liveCD on my computer, it crashes on me and dumps the call trace to me. This happens both on Ubuntu and Kubuntu 10.04 with similar results. I am using a Gateway(tm) GT5408 machine with a default Intel(R) BIOS built-in. At first, the booting screen shows up and seems to load, but then I find that it took too long. Whenever I pressed an arrow key, it showed a bunch of text. Most of it was talking about memory, and from what I've read, it seems like I have a bad BIOS, but I'll let other people decide on that issue. The call trace is as listed below:
Code:
- WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/check.c: 134 check_for_bios_corruption+0xcb/0xe0()
- Hardware name: T5088
- Memory Corruption detected in low memory
- Modules linked in: sqashfs aufs nls_cp437 isofs dm_raid45 xor fbcon titleblit font bitblit softcursor vga16fb vgastate usbhid hid nouveau tta drm_kms_helper drm usb_storage e100 mii intel_agp: 2c_algo_bit agpart
- Pid: 9, Comm: events/0 Tainted: G D 2.6.32-19-generic #28-Ubuntu
- Call trace:
[<c014c342>] warn_slowpath_common+0x72/0xa0
[<c012a9bb>] ? check_for_bios_corruption+0xcb/0xe0
[<c012a9bb>] ? check_for_bios_corruption+0xcb/0xe0
[<c014c3bb>] warn_slowpath_fmt+0x2b/0x30
[<c012a9bb>] check_for_bios_corruption+0xcb/0xe0
[<c012a9dd>] check_corruption+0xd/0x30
[<c016360e>] run_workqueue+0x8e/0x150
[<c012a9d0>] ? check_corrupt+0x0/0x30
[<c0163754>] worker_thread+0x84/0xe0
[<c01676b0>] ? autoremove_wake_function+0x0/0x50
[<c01636d0>] ? worker_thread+0x0/0xe0
[<c0167424>] kthread+0x74/0x80
[<c01673b0>] ? kthread+0x0/0x80
[<c0104087>] kernel_thread_helper+0x7/0x10
---[ end trace 5341fe8e1ae197b2 ]---
View 3 Replies
View Related
Jul 16, 2010
I am having some trouble with RhythmBoxt runs fine until I install the package (Synaptics) Rhythmbox plugins 0.12.8-0. After I install this package and then open RhythmBox, the applications opens for a few seconds and then closes (terminates). I get a segmentation fault.I tried reinstalling but this does not help. From previous posts, others were also obtaining segmentation faults, others had success with uninstalling the rhythmbox-ubuntuone-music-store package. I do not have this installed on my system. My problem is related with the plugins package.If I run rhythmbox from the command line in sudo mode it starts without crashing but with a warning:Rhythmbox-WARNING **: Unable to grab media player keys: Could not get owner of name 'org.gnome.SettingsDaemon': no such name But when I select one of the plugin sources it then terminates and closes down
View 6 Replies
View Related
Jul 30, 2010
The program crashes immediately after displaying the splash screen with the following error:
File "/usr/bin/ubuntu-tweak", line 109, in <module>from ubuntutweak.mainwindow import MainWindowFile "/usr/lib/python2.6/dist-packages/ubuntutweak/mainwindow.py", line 148, in <module>File "/usr/lib/python2.6/dist-packages/ubuntutweak/modules/__init__.py", line 27,
[code]...
View 3 Replies
View Related
Nov 17, 2010
Title really says all, I installed KVPNC in Ubuntu 10.10 but I can't use it. It keeps crashing on startup. Who can help me out with this?
View 6 Replies
View Related
May 1, 2010
Yesterday, I upgraded my Ubuntu system from 8.04 to 10.04. The installation process went smoothly, and the first boot of 10.04 was very smooth. However, after I selected 10.04 from my boot screen, the start-up process went very slow and then froze at a black screen. I shut it down and restarted it, only to have it load normally.
This happens on and off and I don't know why it's doing this.Does anyone have any idea what this could be or has had the same problems?
View 1 Replies
View Related
Nov 4, 2010
I've been having a bit of trouble with Nautilus for the past few days; as soon as I log in, Nautilus starts opening "Starting file manager" windows uncontrollably, and I have to 'killall nautilus' to stop it.
If I try and run nautilus from the terminal, I'm merely given the output code...
View 5 Replies
View Related
Dec 27, 2010
I'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.
And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.
View 1 Replies
View Related
Mar 28, 2016
I am new to debian. I run debian on a laptop with nvidia geforce chip 740 m (optimus), it has been working great until today when i turned it on , the start screen did not show up and it went straight to terminal mode. Starting the kdm service manually does not do anything.
View 6 Replies
View Related
Jan 11, 2009
Just did a fresh install of Fedora 10 and install Banshee. The problem is it wont start. I get 'Banshee has encountered a fatal errorError details:
Code:
An unhandled exception was thrown: Could not load type 'Banshee.ServiceStack.ServiceManager' from assembly 'Banshee.Services, Version=1.4.0.0,
[code]...
View 14 Replies
View Related
Jan 22, 2010
i'm not sure myself running fed 12 kde dragon video player crashes when i try to open it.
View 1 Replies
View Related
Sep 18, 2010
Kubuntu Maverick Meerkat 10.10 says "Unable to contact KDED". This in return disables all of my KDE services. I have already freshly installed 10.10 2 times. Also when I first login it says KWIN has crashed, but I see it running in the service Manager. I have no internet service without KDE services.
View 2 Replies
View Related
Apr 24, 2011
When I am trying to start Tuxmath, it only show the initial screen for a second or two, and shuts down. From the console I get this error message:
[code]...
View 2 Replies
View Related
Apr 3, 2010
I just installed Fedora 12 on my pc and a few seconds after i boot the system, it crashes. Everything stops working.The keybord and the screen don't respond. I can move only my mouse
View 14 Replies
View Related
May 19, 2009
I just installed firefox and flash-plugin.The version of firefox is 3.0.10, package is firefox-3.0.10-1.el5.centos.The version of flash-plugin is 10.0.22.87, package is flash-plugin-10.0.22.87-1.el5.rf.But firefox crashes when there is flash in web page, unless disable flash plugin in firefox.
View 6 Replies
View Related
