Ubuntu :: 11.0.4 System Crash And Shutdown Everytime Use Software Center
Aug 1, 2011
I just installed Ubuntu 11.0.4 on an Asus 1005AH Eepc for a friend. The only changes I made after default install were to add French as primary language. Whenever I attempt to install a downloaded .deb or a package found through the Software Center, after asking for the password and a little delay the OS crashes and the system shuts down. There is no visual indication of what might be going wrong.
View 6 Replies
ADVERTISEMENT
Oct 12, 2010
ubuntu with windows xp on my laptop. My problem is everytime I out of ubuntu, the vga driver seems to disappear. I can't start x server, and when go into windows xp, the screen is on very low resolution state. After go into win xp and reboot, I can boot either ubuntu or winxp normally, everything is okey again. In summary:- When go into XP and reboot, I can boot ubuntu and XP normally.- When go into ubuntu and reboot, I can only boot with very low resolution in XP and can not start x server if boot ubuntu
View 3 Replies
View Related
Jan 8, 2011
Now everytime i start amarok it keep crash. This is the terminal output:
ari@linux-2tny:~> amarok
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110109 2:47:25 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
[Code]....
I don't have idea what's the problem. FYI, I installed nvidia driver before this happens but donn't know if that is related to this problem.
View 9 Replies
View Related
Mar 21, 2010
I edited fstab file and added my hdd partitions to it. just wondering should i manually unmount my partitions everytime i shutdown or restart.
View 4 Replies
View Related
Jul 21, 2010
I have used ubuntu 8.04 in a dual boot system together with windows xp and wanted to upgrade to ubuntu 10.04.
Since the upgrade did not work (the usr partition was to small and I couldn't make it big enough) I downloaded the ubuntu-10.04-desktop-i386 edition and tried to install it.
Everything worked find during the installation process but when I tried to start ubuntu I could only see the ubuntu desktop for a second and then the computer began to reboot.
Then I thought that I can solve this problem by installing ubuntu 8.04.4 again and trying to upgrade to ubuntu 10.04.
After the installation I could start ubuntu 8.04.4 without problems but after upgrading to ubuntu 10.04 the same problem occurs again: ubuntu 10.04 causes the computer to reboot every time I try to start ubuntu.
View 4 Replies
View Related
Jan 21, 2011
I run apache on a non standard port(82).I just installed unity to play around with it and while I was playing with it I installed prixfixe through software center to edit the menus.While prixfixe was installing my computer was acting very slow which was odd, but not completely unusual.During this time I ran ps aux which showed that my apache server was taking up most of the processing power.I was about to stop my web server,but I waited just in case the web server was updating a few things (I run ampache).
My computer finished installing the software and then I ran some command with sudo (I can't remember what the command was), but it threw back some message saying "setid blabla". I restarted my computer and when I got to my gdm my normal user account did not show up. There were no accounts and the restart/shutdown buttons didn't work.Now I'm running on a livecd and checking out my apache access logs, apache error logs,and kernel logs,but nothing looks out of place..
View 9 Replies
View Related
Aug 30, 2010
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies
View Related
Apr 25, 2011
Gigabyte P55-USB3 mobo,
ATI Radeon HD 5800 Series graphics card,
8 GB ram
Ubuntu installed after Win7. Dual boot Win7 and Ubuntu 10.04, shared NFTS partition for Downloads and Documents, Grub setup to load Ubuntu by default. I can use the option to hibernate in Windows (but it is disabled by default). I would very much like to enable the "Hibernate" function on this machine, but there is no option for it in the menus. "sudo shutdown now" in a Terminal results in a screen that resembles the login screen background, but the machine is completely irresponsive and must be silenced by long-pressing the physical power button. When I use the GUI to shut down, everything works fine. Perhaps related: When waking the machine from the screen saver, the login window does not turn up before I press the "Esc" button. I am using a standard Gnome screen saver. Perhaps related: The Grub boot screen is getting more and more options every time the Linux kernel is updated.
View 4 Replies
View Related
Aug 30, 2010
Okay, so my problem is that I can't get rid of some repositories on the left side of the Ubuntu software center.
I've gone to Edit > Software Sources and unchecked everything in Other Software, rebooted and still they remain. I then went into /etc/apt/sources.list.d/ and deleted the offending .list files, and they're still there. How do I get rid of them?
View 3 Replies
View Related
Sep 30, 2010
When I try to remove a package using software center I get this message : the package system is broken.
View 9 Replies
View Related
Jun 6, 2011
I want to measure the system load on my Ubuntu media center computer. What commands and utilities are available? I've explored the w, top, iostat, and uptime commands. Anything else I could use?
View 5 Replies
View Related
Mar 28, 2010
I recently managed to install it on a PC alongside Windows XP (seperate hard disk's). Anyways I downloaded AVG 8.5.732 (avg85flx-r732-a3168.i386.deb) and installed the package (Synaptic Package Manager lists it as being installed) but I can't find in the Ubuntu Software Centre nor can I find it in the system/main menu list.
View 6 Replies
View Related
Sep 23, 2010
spent endless time trying to get multiple monitors going and have had a bit of success -- got two showing just fine. However, when I try to access the page I mention in the title, Slackware hangs hard -- only the red button will get me out. This is recent. I had dual monitors going before and that didn't happen, I think one monitor was at 800x600 and the other at some wide screeen rez. Anyway all by itself the 800x600 decided to go to 1024x768. Now, note that it all shows fine, no issues of any kind on the monitors themselves, xrandr works
View 4 Replies
View Related
Mar 12, 2010
After a system crash while watching a video with vlc and downloading somthing, i can't reboot my system.In the secure mode i get this informations[4.774621] device-mapper: dm-rai45: installized v0.2594b[ 1166.832045] ACPI: EC: non-query interrupt recived, switching to interrupt modeNow the scree is black (20 minnutes later
View 1 Replies
View Related
Mar 24, 2011
if my PC lags a bit it crashes!But I wouldn't think it would be an ordinary crash.Earlier today I installed Xubuntu 10.04onto my PC. Well, The installation was smooth and I was able to get it installed. Then all of a sudden when I was looking aroundmy PC got caught in a little lag.. And when it lagged this black screen came up and it said
"Starting Common Unix System; cupsd [ OK ] "
"Checking Battery State [ OK ] "
Then That screen disappears and these Straight gray bars come up and they cover the top of my screenAnd they just blink! I figured it might be a glitch so I went to go eat dinner.About 20-30 minutes later I come back and there still blinking.I tryed rebooting the system and trying again and it got cought in a little lag and the
"Starting Common Unix System; cupsd [ OK ] "
"Checking Battery State [ OK ] "
Came back up and it disappeared again and the bars came back!I tried reinstalling Xubuntu 10.04 but it came out the same result.I tried updating the system cause when I installed it it said I had 164 updates waiting.
_PC INFO_
Dell Dimension 2300 with Xubuntu 10.04 as the operating system
256mbs of RAM
[code]....
View 2 Replies
View Related
Feb 3, 2010
System specs:
Compaq presario 430-EB
4 GIG RAM
320 GIG storage
AMD athlon dual core x64 2.1 mghz processor
Nvidia 8200 M
I recently decided to partition my laptop wholly to ubuntu, so i installed ubuntu without any problem, then i logged on for the first time and i installed the driver to my monitor (nvidia) and i did sudo apt-get update which made me get all sorts of updates, untill the updating stopped at about halfway asking me to reboot the system.
I rebooted the system, but no matter what i do, if i run it in recovery mode or not, i always get stuck on this piece of code on a black screen:
Code:
fsck from util-linux-ng 2.16
/dev/sda1: clean, 148123/18841600 files, 1880615/75358899 blocks
init: udevtrigger main process (540) terminated with status 1
init: udevtrigger post-stop process (541) terminated with status 1
init: udevmonitor main process (539) killed by TERM signal
init: networking main process (544) terminated with status 1
Also, please no answers like "hav u tried liek reinstalling ubuntu lolz?" because i wouldn't bother posting this thread if i considered doing that -_-'
View 3 Replies
View Related
May 4, 2010
It seems that watching an embedded video crashes my system every once in a while. Is there any way to figure out what is causing the crashes or fix it?
Some extra info - The cpu usage jumps to 45-50 percent when a embedded video is playing.
View 1 Replies
View Related
Nov 29, 2010
I seem to be having a problem on the new Kernel (2.6.35-23) with the system randomly freezing.
I have installed a number of things in recent days leading up to this problem, but when i boot with the old kernel i don't seem to have any issues. From this i am guessing its the new kernel.
The freezing seems (although i am not sure) to be worse when Rhythmbox is running. When it happens everything freezes, the playing song skips, replaying the same one second of music over and over. All the hotkeys stop and the mouse cursor stops responding.
I have seen people talking about system logs to look at system crashes but i don't know how to show those. I also doubt my ability to interpret them.
View 9 Replies
View Related
Apr 17, 2011
I am running Ubuntu 10.10 (amd64) on an Intel Atom 525 motherboard. I have a 5-bay SATA enclosure connected to my system through a Syba SD-SATA2-2E2I PCI card (uses the SIL3124 chipset). Under small to moderate load (transfer speed: ~25 Mb/sec), this setup works perfectly. Under heavy load (transfer speed: ~40 - 70 Mb/sec), the system crashes. By crash I mean I loose SSH connectivity, I can't ping the system, etc. The only solution is a hard reset. Initially, I thought this was a SAMBA problem so I logged into the system and tried doing a copy directly from the SATA enclosure to the system disk (connected directly to the motherboard). After 100 GB copied (at ~75 Mb/sec), the system crashed. My question: I am fairly new to Linux and Ubuntu. How would I go about diagnosing this problem?
View 5 Replies
View Related
May 2, 2011
After my computer crashed due to an electrical failure in the house, every time I try to boot up (I'm using Ubuntu 10.04) I get the following error:
mount: mounting /proc on /root/proc/ failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg.
I'm then put into initramfs
I assume that this is because the system wasn't unmounted properly but I haven't been able to find the best way to solve this problem.
View 2 Replies
View Related
May 26, 2011
Occasionally, kwin will crash and recover itself, but afterwards, my system starts using GTK notifications (yellow popup bubbles with the pie graph countdown timer). I've tried restarting knotify4 to no avail.
kde 4.6.2 on kubuntu 11.04
View 2 Replies
View Related
Jul 30, 2011
i have a problem with adobe flash player. when i watch videos or blip.tv or other video streaming sites, my computer crashes randomly during the video. it stops responding, i can't use keyboard and mouse. the only way to recover is a hard reset.it happens in ff, opera, chromium and chrome. i had this problem on flash player 10 and on 11-beta i have it too.i running ubuntu 11.04 natty 64-bit. kernel: 2.6.38-11-generic. gnome 2.32.1. with unity.
short config of my pc:
cpu: amd athlon x2 64bit dualcore
mobo: asus m2n68 (+newset bios there is)
[code]....
View 9 Replies
View Related
May 8, 2010
I came home from my walk and my monitor was black, no activity when hitting keyboard or mouse. Shut down machine and then waited for reboot, it sticks to the same moment as picture posted. I tried dif boot seq in the selection but no luck. I cant find my boot disc.
View 7 Replies
View Related
Apr 27, 2010
I have a custom compiled kernel which seems to work OK. However, during boot, I get:
Apr 27 21:16:14 poni kernel: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:21:70:90:2d:6c
Apr 27 21:16:14 poni kernel: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet)
[code]....
System continues to boot OK and everything seems to work fine as I expect. I am not sure what the above causes. It looks related to USB, but I am not sure. lsusb gives:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 3 Replies
View Related
May 1, 2010
As the title says, i was in the middle of the upgrade, when the system froze then a black screen with the text similar to: starting apache ..... starting ..... ... in that way, but with more text, i could not remember the exact details. When i boot up, it say /dev not found, and other errors, and a weird black screen that seems to be loading modules appears, but never finishes and starts to act strange. Any way i can get this fixed without just copying my data and reimaging my partition.
View 2 Replies
View Related
Apr 7, 2011
I have a Dell studio running ubuntu for two years now. I had ubuntu 10.04, but a few days ago, the update manager started to bug me that some stuff don't work properly and that I need to to a partial upgrade. I postponed that for a while, and all worked fine, but I finally had sometime and clicked "yes", all began collapsing:
1) the update manager crashed while updating.
2) I rebooted and ran it again. same crash at the same stage.
3) I decided, god knows why, to do a full upgrade to 10.10, which also crasehd.
Now it won't even boot. It always get stuck at a line saying "no IPv6 routers present" or something of that sort. when I switch off manually the wireless switch on the laptop, the boot gets stuck a bit earlier, on a line that says: "laptop login:"
EDIT: I just remembered something which might be important: I had a hibernation problem on the upgrade to 10.04, so I played around a bit with that. now it uses libgcrypt, and I remember I set up something manually then, but I can't remember what.
View 3 Replies
View Related
Jun 17, 2011
I've recently installed release 11.04 and am trying to get wireless networking operational. I'm using a netgear wg111t usb wireless adapter. I've installed ndiswrapper and have got the netgear windows drivers installed ok. My problem is when I try to connect wirelessly I get a system crash, think it tends to be called a kernel panic in linux. The network connection is confirmed and about 5-10 seconds later the crash happens. I've updated the linux kernel to 2.6.39-0-generic but thats not helped.
I can connect with a cable but that is somewhat limiting.
View 8 Replies
View Related
Aug 22, 2011
how can I disable the automatic file system check after power outages or system crashes? The check sometimes prompts for a key (ignore, repair etc.) but the panels do not have a keyboard.
View 9 Replies
View Related
May 4, 2010
From couple of mins my system shutdowned without my permission I thought I'm infected or something because I installed aMSN so I thought it's because of it, but I checked my syslog and found this:
May 5 00:01:30 spuny-laptop kernel: [ 2441.497050] CE: hpet increasing min_delta_ns to 15000 nsec
May 5 00:17:01 spuny-laptop CRON[1912]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 5 00:37:32 spuny-laptop pppd[1560]: Protocol-Reject for unsupported protocol 0xac05
May 5 00:38:15 spuny-laptop pulseaudio[1426]: ratelimit.c: 2 events suppressed
May 5 00:48:06 spuny-laptop kernel: [ 5237.586974] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
May 5 00:50:22 spuny-laptop kernel: [ 5373.683347] Critical temperature reached (100 C), shutting down.
May 5 00:50:22 spuny-laptop kernel: Kernel logging (proc) stopped.
Temperature reached is that what cause system halt? Also when I press ctrl+alt+Fn I see blank screen why is that?
View 4 Replies
View Related
Sep 10, 2010
I am using Ubuntu 10.04. From last 3-4 days, after updating, I am not able to shutdown the system. I try to use command, but behavior is same Whenever I try to shutdown the system, it exits from desktop environment and a white screen displays on screen. And nothing happened. One time I did wait for 1/2 hr, but system dont seems to power down.
View 4 Replies
View Related
