I have made a usb ubuntu bootable memory stick following ubuntu instructions, using startup disk creator, i used a fresh burnt cd with correct md5 checksum, 32 bit desktop 386i created the key with 4 gb persistence area, the key is 8Gb corsair. I have made keys before successfully. Ive tried several attempts and I even tried using iso image in windows with the software to create the key as per ubuntu instructions. Every time the key makes successfully. Then this happens
I put usb key in pc, boot, it starts to boot ubuntu, it gets as far as ubuntu logo with 5 dots scanning across and stays at this point. I just hit F1 and got this message.
Quote:(process:411) Glib - Warning ** : getpwuid_r(): failed due to unknown user id (0) Stdin:error 0
Im not an expert but that looks like something to do with passwords???
I have a laptop that I need to update the BIOS but I cant get into Windows. Here is what I want to do.I know I need a DOS boot able disk. I figured I would download the FreeDOS disk and just add a file to the iso and burn the ISO. So far I cannot do that and I don't know how or even if there is a way to do this. So the long of the short of it is I need a bootable cd that is dos based and has my BIOS update file on it.
I remember being able to format a 3.5 inch floppy using MS DOS. The command was format a:/s
("a" was the drive letter and the "/s" was to add the bootable system file.)
HOW can I do that in LINUX, specially Debian 6.01 (my current version) I googled it and found a bunch of sites all offering answers.
NONE worked for me, I saw an option in a Slackware installation with a "make bootable USB stick option". (It can be used as a rescue USB Stick also) We don't have that in Debian. How can I do that with my current Debian install?
I have several Debian USB installs on flash drives, They work great and give the user an opportunity to run and experience Debian with modifying their set-up. I am trying to set-up one that will NOT only boot and work as a live install, but will also allow me to install on the host machine right from the working USB Flash drive, if I choose to do so.
how to get a working bootable USB boot disk for DOS using Fedora 12. I needed the dos boot disk to flash my motherboard BIOS as it did not support linux for updating the bios. Thought I'd put the steps involved to help other people who wanted to do something similar. The steps outlined here are for a Fedora 12 system. You should be able to extrapolate the minor changes that may be required for other linux distributions. All commands listed below to be typed in on a command prompt, logged in as root. Here goes...
1. Prerequisites:
syslinux testdisk freedos base cd (http://www.freedos.org/)
[code]....
Acknowledgments:
1. [URL] for enlightening me on the fact that testdisk could be used instead of install-mbr
I'm just interested if there does exist any utility for creating bootable flash drives? I mean, if I could make somehow LiveCD with KDE desktop on openSUSE? I used Ubuntu and it had it's own utility with nice GUI, it just needed any bootable .ISO file or bootable CD/DVD and it created LiveCD on USB flash drive. So is there any chance to find something similar?
I work in a computer service center and it'll be very helpful (I think) to have bootable USB Flash dive with operating system to log into dead operating system partitions. Of course I have Windows LiveCD, but it has as much bugs as it's parent big brother.Oh, I forget to post my operating system versio. I'm using openSUSE 11.2 x64 with KDE version 4.3.5
Is there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.
I'd like to do a complete backup of my laptop, convert it to ISO, and then create a bootable flash drive with it. I'd like to be able to totally restore, or run (like in Live mode) the image.
I want to install Ubuntu to a USB Flash drive (so I have my Desktop everywhere and can customize it as I want). I'm still choosing what's the best filesystem for the USB; Ext2 with no journaling or Ext4 with journaling but performance increase? I know that journaling will probably reduce the life of the USB flash drive dramatically, so is Ext2 the obvious choice? Or is it a bad idea to install Linux (Ubuntu probably) on a USB Flash drive? I tried running a live CD from the USB drive, but it wasn't very customizable - which is the point of carrying my OS with me.
Making a live CD using tools such as livecd-creator seems like a good solution to create a bootable read-only image to install on Compact Flash. My goal is to prevent failure due to write cycle limits of Compact Flash memory. A secondary goal is to have the live CD available for troubleshooting. However, Usenet postings indicate challenges in making the live CD image on CF bootable. Has anyone succeeded in doing this?
root@martin-desktop:~# tail -n0 -f /var/log/messages Jan 29 01:43:23 martin-desktop kernel: [440650.637531] usb 2-2: new high speed USB device using ehci_hcd and address 8 Jan 29 01:43:23 martin-desktop kernel: [440650.776107] usb 2-2: configuration #1 chosen from 1 choice
[code].....
When I set "USB flash drive" as a first bootable device in BIOS, I get SYSLINUX "boot:" prompt and it loads both "vmlinuz" and "initrd.gz", but finally I end up in BusyBox prompt and following message:
Quote:
"Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! does not exist. Dropping to a shell!"
Last boot message which I see is "Attached scsi generic sg2 type 0".what might cause such behavior? Did I miss anything while preparing USB flash drive?
I have never worked with Linux before but as part of my new job I need to format and install a program on a compact flash card. I have followed our procedure to the T but when i install the card I get a No bootable partition error. Here is what I'm doing. I go into Gnome terminal and change to my directory to "cd dcmsetupdir" (this may not be important but I want to give as much info as I can. Then I type "sudo ./format_cf". once this is complete (no errors detected), I type in "sudo ./install_cf" this seems to install correctly but when I boot up the unit with the card in I get the no bootable partition error.
I have a USB drive of 4 GB and I want to make the drive as bootable. I used the command /sbin/mkbootdisk --device /dev/sdb1 "kernal version" ( sdb1 is my pen drive).When i ran this cmd,it gave me an error saying not enough space to write.
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type= Entering MS-DOS parser (offset=0, size=8168931328) MSDOS_MAGIC found looking at part 0 (offset 0, size 657457152, type 0x00) new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
I have an Intel Core2 Duo system that I want to upgrade from Fedora 12 to Fedora 14. I have downloaded the DVD iso for Fedora 14, however, I do not want to burn a DVD for installation, and would like to be able to perform the upgrade from a USB flash drive. Where can I find information that will explain how to make a bootable flash drive that can install Fedora 14?
I am thinking of using flash drives to boot linux image files instead of iso files. I remember reading in the past that booting off USB flash drives were sometimes problematic -- and I don't know if they're still are. I want to know from your personal experience what type and brand of flash drive has work for you in creating a bootable flash image.
copy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.
- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.
- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.
- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?
My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.
I'm looking for a way to make a bootable floppy that has drdflash.img, my flash utility and my bios file on it for a bios recovery disk. This is on a board that has a failed bios, so everything is pretty much dead (except for the humble floppy drive). I don't have a screen to work with so this floppy needs to be able to run the utility and automatically flash the chip for me. I've heard this is possible, but am unable to find clear instructions on how to do any of this. I know the basics of it is to copy the bios file and flash utility to a floppy along with a bootdisk that will run these things (sometimes the .bat file needs to be modified in order to do this automatically). So I've downloaded drdflash but it came as a .img and I don't think it can be 'just' copied to disk. I came across the 'dd' command but have also heard its nicknamed 'data destroyer' or words to that effect.
creating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
I have a cdrom (bootable) that I want to copy over to a usb stick, and have THAT boot the system (Adding other files to it before hand) I know it's easy, but how? I've already made a iso of the cdrom.
How can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
If I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
I have slackware on a bootable flash drive, and the pc onto which I want to install slack won't boot from a flash drive. So how do I burn a bootable set of CDs from my flash drive?
I own a legit Windows XP Home CD, with time its getting more scratches so I want to make an ISO backup. I tried Brasero but the ISO it creates doesn't seem to be bootable. I don't mind using GUI programs, but I'd prefer to know the command line programs to learn more .
i'm in 64 bit kubuntu, with the the nswrapper in 10.10http://www.metacafe.comin firefox i get the sound but not the video in metacafe, when the video is unblocked by flash block. Others have the same problem?
I get this link [url] for change my version of flash, because I can't playing flash when I have turned on effects. So I downloaded file for my Ubuntu 10.04 64-bit and I extracted it. But there is problem, because I don't know on which location I need to copy .so file?
